Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 BIDDER | |
| 2 | L2₹40.4 L+₹1.7 L (4.28%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L2 | Rejected-Finance BIDDER REJECTED DUE HIGHER BID VALUE | |
| 3 | L3₹41.6 L+₹2.9 L (7.47%)Rejected-Finance PO BAZAR LINE BOMDILA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L3 | Rejected-Finance BIDDER REJECTED DUE HIGHER BID VALUE | |
| 4 | L4₹42.6 L+₹3.9 L (9.94%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE HIGHER BID VALUE | |
| 5 | L5₹42.7 L+₹4.0 L (10.3%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE HIGHER BID VALUE |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
18 Mar 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL BIRENDRA SINGH
GE 859 EWS
SPECIAL REPAIR OF BUILDING NUMBER -T-101 T 104 T 107 T 106 A TE 424 T 111 T 144 AND T 159 A NEAR 311 MTN BDE OF AGE BR AND AGE EM UNDER GE859 EWS
2024_MES_644044_1
8476/E8
Open Tender
Civil Works
Item Rate
180 days
BIRPUR
PL REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹74,000
20 Apr 2024
26 Feb 2024
19 Mar 2024
26 Feb 2024
18 Mar 2024
11 Mar 2024
Amount
Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings with complete all as specified and directed by Engr-in-Charge.
S&F Pre-Painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as with complete all as specified and directed by Engr-in-Charge.
S&F Pre-Painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
S&F figured glass 3mm thick pin head type and glazing with oil oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles with complete all as specified and directed by Engr-in-Charge.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/Johnson/ Somany).
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm, in vertical surfaces etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/Johnson/ Somany).
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing).
M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles .
M & L for 300 x 200 x7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Johnson/ Somany).
Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces with complete all as specified and directed by Engr-in-Charge.
S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces with complete all as specified and directed by Engr-in-Charge.
M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.
M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level)
M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm
S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete
S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc
S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0 with complete all as specified and directed by Engr-in-Charge.
S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.
S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.
S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed
S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed
S & F 150mm size extruded aluminium alloy handles, fabricated type anodised
S & F 100mm size extruded aluminium alloy handles, fabricated type anodised
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
S&F PVC coated 25mm dia mild steel curtain rod of medium weight and fixing brackets, curtain ring @ 7 nos/Rm and decorative end supports etc complete all as directed”
M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.
M & L 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement with complete all as specified and directed by Engr-in-Charge.
M & L 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement with complete all as specified and directed by Engr-in-Charge.
Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD) all as specified including preperation of surfaces
M&L for newly plastered surfaces of walls and applying two coats of cement based paint, over a coat of primer with complete all as specified and directed by Engr-in-Charge.
M&L for in replacement of Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly with complete all as specified and directed by Engr-in-Charge.
All as per item No. 50 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 50 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
M&L for in replacement of Point wiring with 2.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
Supply & fixing Modular switch 1 way 6A,1 module, 240 Volts complete all as specified & directed.
Supply & fixing Modular switch 1 way 16A,1 module, 240 Volts complete all as specified & directed.
Supply & fixing Modular Socket, 6A - 5 pin combined 2 module, 240 Volts complete all as specified & directed.
Supply & fixing Modular Socket 6A/16A - 5 pin combined 2 module, 240 Volts complete all as specified & directed.
S&F modular White cover plate with frame 01 module
S&F modular White cover plate with frame 02 module
S&F modular White cover plate with frame 03 module
S&F modular White cover plate with frame 04 module
S&F modular White cover plate with frame 06 module
S&F modular White cover plate with frame 08/10 module
S&F modular Metal flush box 1/2 module
S&F modular Metal flush box 3 module
S&F modular Metal flush box 4 module
S&F modular Metal flush box 6 module
S&F modular Metal flush box 8/10 module
S&F in replacement of downlighter round 15 W & Driver incl integrated electronic driver including taking down old unsv one complete all as specified and directed of Make :- Havells /Bajaj/Crompton
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Taking down old geyser any type/size from existing position and depositing to MES yard as directed.
Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 50 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge
Taking down old exhaust fan any type/size from existing position and depositing to MES yard as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150/250 mm
S&F in replacement of bedside wall light decorative light of capacity 3/5 watt as per sample complete all as specified & directed. Make: Philips/Havells/Crompton
S&F in replacement wall mounted decorative ornamental type light fitting complete with driver, holder, LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make - Philips, Model Trendo or equivalent
S&F in replacement of mirror light decorative light of capacity 9/12 watt as per sample complete all as specified & directed. Make: Philips/Havells/Crompton
S&F in replacement of wall lamp 5 Watt Trapezoid shape wall lamp fixtures as per sample complete all as specified & directed. Make: Philips/Havells/Crompton
S&F in replacement of ceiling light CITRA 6 Light 60 watt white crystal LED Chandelier light a as per sample complete all as specified & directed.
S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor with complete all as specified and directed by Engr-in-Charge. (Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run.)
M/S R N ENTERPRISES
M/S NIRMAL TRADERS
MS SANGRILA SYNDICATE
M/S MURPHEW ENTERPRISES
M/S ASHOK CONSTRUCTION
M/S DOLKO ENTERPRISES BOMDILA
M/S DK THUNGON CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .