Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.6 LAccepted-AOC OLD NO 4 263 NEW NO 5B 345 ANTHONIARPURAM SELSEENI COLONY TUTICORIN 628 008 | TUTICORIN | TAMIL NADU | 628008 | ₹2.6 L Quoted ₹2.9 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.1 LRejected-AOC 4 9 2 ETTAYAPURAM ROAD NEAR A P C MAHALAKSHMI COLLEGE TUTICORIN 2 | ₹3.1 L | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MARIA LAKSHMI ENTERPRISES L1 | VEL ENGINEERING L2 |
|---|---|---|---|---|---|
| 1.00 | Charges for loading & transporting pulley from Central stores/TTPS to private work shop for reconditioning and transporting back the finished pulley and retrieved scraps to central stores and including T&P hire charges and cost of consumables. | 1 | No. | 5,900 ₹6,962 | 6,300 ₹7,434 |
| 2.00 | Charges for cutting and removal of worn out outer shell and end plates 2 Nos. from the pulley by using cutting gas without damaging the shaft and hub and including T&P hire charges and cost of consumables etc. | 1 | No. | 10,400 ₹12,272 | 10,700 ₹12,626 |
| 3.00 | Charges towards fabrication of new end disc to correct dimension by cutting the M.S. plate 25mm thick and machining the M.S. plate to get good surface finish two numbers and including T&P hire charges and cost of consumables etc. | 1 | Operation | 1,550 ₹1,829 | 1,650 ₹1,947 |
| 4.00 | Charges for loading centering and machining of new 2 Nos. end disc to correct dimension and including T&P hire charges and cost of consumables etc. | 1 | Operation | 9,000 ₹10,620 | 9,800 ₹11,564 |
| 5.00 | Charges for loading the New EN8 shaft on the lathe and machining full length of the shaft for trueness checking-turning and step turning with micro finishing to suit plummer block seating area and hub seating area and including T&P hire charges and cost of consumables etc. | 1 | Operation | 36,000 ₹42,480 | 38,200 ₹45,076 |
| 6.00 | Charges for loading the shaft in the slotting machine and forming key ways in three different locations and including T&P hire charges and cost of consumables etc. | 1 | Operation | 9,500 ₹11,210 | 10,300 ₹12,154 |
| 7.00 | Charges towards fabrication and machining of 2 nos new hubs to suit the end disc and the shaft locations and including T&P hire charges and cost of consumables etc. | 1 | Operation | 6,800 ₹8,024 | 7,200 ₹8,496 |
| 8.00 | Charges towards fabrication and machining of 2 Nos. Key as per required dimensions and including T&P hire charges and cost of consumables etc. | 1 | Operation | 1,000 ₹1,180 | 1,100 ₹1,298 |
| 9.00 | Charges for fabrication of reinforcement frame by using 16mm thick M.S. plate to provide centre of the pulley. Machine the frame on both inner and outer side to position the same on outer dia of shaft and inner dia of shell. Fitting and welding the frame on inside the pulley and including T&P hire charges and cost of consumables etc. | 1 | No. | 18,000 ₹21,240 | 19,600 ₹23,128 |
| 10.00 | Charges for assembling of all the items of pulley, both hubs hot oil bathed and fitted in the shaft in hot condition and including T&P hire charges and cost of consumables etc. | 1 | Operation | 10,000 ₹11,800 | 10,400 ₹12,272 |
Tender Value
Refer Docs
EMD Value
₹2,900
Closing Date
17 Dec 2025, 2:00 pmClosed
CE/TTPS
O/o CE/TTPS
ICHP-Reconditioning of worn out defective Secondary Drive pulley for Conveyor-49
2025_EB_628038_1
CE/TTPS/SE/MI/172/2025-2026
Open Tender
Miscellaneous Works
30 days
TTPS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹2,900
Yes
26 Mar 2026
2 Dec 2025
18 Dec 2025
2 Dec 2025
17 Dec 2025
2 Dec 2025
Charges for loading & transporting pulley from Central stores/TTPS to private work shop for reconditioning and transporting back the finished pulley and retrieved scraps to central stores and including T&P hire charges and cost of consumables.
Charges for cutting and removal of worn out outer shell and end plates 2 Nos. from the pulley by using cutting gas without damaging the shaft and hub and including T&P hire charges and cost of consumables etc.
Charges towards fabrication of new end disc to correct dimension by cutting the M.S. plate 25mm thick and machining the M.S. plate to get good surface finish two numbers and including T&P hire charges and cost of consumables etc.
Charges for loading centering and machining of new 2 Nos. end disc to correct dimension and including T&P hire charges and cost of consumables etc.
Charges for loading the New EN8 shaft on the lathe and machining full length of the shaft for trueness checking-turning and step turning with micro finishing to suit plummer block seating area and hub seating area and including T&P hire charges and cost of consumables etc.
Charges for loading the shaft in the slotting machine and forming key ways in three different locations and including T&P hire charges and cost of consumables etc.
Charges towards fabrication and machining of 2 nos new hubs to suit the end disc and the shaft locations and including T&P hire charges and cost of consumables etc.
Charges towards fabrication and machining of 2 Nos. Key as per required dimensions and including T&P hire charges and cost of consumables etc.
Charges for fabrication of reinforcement frame by using 16mm thick M.S. plate to provide centre of the pulley. Machine the frame on both inner and outer side to position the same on outer dia of shaft and inner dia of shell. Fitting and welding the frame on inside the pulley and including T&P hire charges and cost of consumables etc.
Charges for assembling of all the items of pulley, both hubs hot oil bathed and fitted in the shaft in hot condition and including T&P hire charges and cost of consumables etc.
Charges for welding works in pulley, shell end disc and stiffeners and shell & hub etc and including T&P hire charges and cost of consumables etc.
Charges for pulley Stress relieving and static balancing and check up.
Cost of EN8 Shaft
Cost of Hub (MS)
Cost of End Disc (MS)
Cost of Reinforcement Stiffener
Cost of Keys
Cost of Welding Rod E 7018 (MS)
VEL ENGINEERING (BID ID -1534537)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_750842.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
