REPAIR MAINT OF GATE VALVE EXTERNAL WATER SUPPLY PIPE LINE AND ALLIED WORKS AT AF STN BAMRAULI UNDER GE AF BAMRAULI

Returning, filling in & including spreading, levelling & well ramming in layers not exceeding 25 cm thick as in soft/loose soil, complete all as specified and directed.

Removal of surplus spoil to a distance not exceeding 50 mtr depositing where directed at a level not exceeding 1.5 mtr above ground level, complete all as specified and directed.

Excavation in hard standing for crossing the road as per the authorized width for taking out/laying/cleaning/repairing of CI/GI pipe lines all as directed including making good the road cut to match with the existing surface either with bituminous macadam or with PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregate), complete all as specified and directed.

Taking up unserviceable CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead, complete all as specified and directed for the following sizes/bores of pipes :-(Earth work shall be measured and paid separately).

(a) 150mm bore dia.

(b) 100mm bore dia.

Laying only in trenches CI pipe with spigot and socketed ends complete after cleaning properly/thoroughly & removal of all blockage removing all silt and deposited organics inside using bamboo or rod with brush, complete all as specified and directed for the following sizes/bore of pipes :-

(a) 150mm bore dia.

(b) 100mm bore dia.

Supply & laying in trenches ductile iron (DI) pipe with spigot and socketed ends centrifugally cast class 'K-7' in any length laid in trenches complete all as specified and directed for the following sizes/bore of pipes (DI fittings and jointing materials shall be measured and paid separately) :-

(a) 150 mm bore dia

(b) 100 mm bore dia

M&L for cutting of the CI/DI pipe in position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer of the following sizes, complete all as specified and directed:-

(a) 150 mm bore.

(b) 100 mm bore.

M&L for rubber gasket joint suitable for DI pipe and fittings with size of nuts, washer & bolts etc, complete all as specified and directed for the following sizes :-

(a) 150 mm bore.

(b) 100 mm bore.

M&L for upto 150 mm bore ductile iron (DI) fittings such as bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, “Y” junction, double branch, cross (all sockets or socket and spigot) collars, flanged spigot, caps and plugs, complete all as specified and directed.

(a) 80 mm dia bore

(b) 50mm dia bore

(c) 40 mm dia bore

(d) 25 mm dia bore

(e) 20 mm dia bore

(f) 15 mm dia bore

Relaying/ refixing of old steel tubing and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc, complete all as specified and directed.

(a) 80 mm dia bore

(b) 50mm dia bore

(c) 40 mm dia bore

(d) 25 mm dia bore

(e) 20 mm dia bore

(f) 15 mm dia bore

(a) 80 mm dia bore

(b) 50mm dia bore

(c) 40 mm dia bore

(d) 25 mm dia bore

(e) 20 mm dia bore

(f) 15 mm dia bore

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

S&F 15 mm dia bib tap brass or cast copper alloy with crutch handle screwed down screwed for iron pipe including taking out unserviceable tape of 15mm dia complete all as specified and directed.

Supply, fixing, jointing and testing in repair of cast iron sluice valve class I (ISI MARKED) PN-1.6 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve, complete all as specified and directed for following bore of CI pipe line :-

(a) 150 mm dia bore

(b) 100 mm dia bore

Dismantling old broken / damaged valve pit chamber and construct valve pit chamber of size 1050mm x 1050 mm x 1050 mm (internal dimention) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

All as per item No 17.00 above but size of valve chamber is 900 x 900 x 900 mm (internal), complete all as specified and directed.

Taking up or down PVC pipe and connection laid in trenches or floors or fixed to walls complete with all fittings etc, complete all as specified and directed of following sizes of pipe :- (Note -Earthwork shall be measured and paid separately under respective item of schedule 'A').

(a) 160 mm outer dia

(b) 90 mm outer dia

(c) 75 mm outer dia

Supply and laying in replacement unplasticised PVC heavy duty pipes with working pessure 6 Kg/SqCm and certified with ISI standards with all fitting such as elbow, tee, socket, reducer, MTA complete of suitable size laid in trenches complete with solvent of the following size with all fitting, complete all as specified and directed :-

(a) 160 mm outer dia

(b) 90 mm outer dia

(c) 75 mm outer dia

S&F of 32 mm dia hydrant opener made out of GI pipe 32 mm dia medium grade including welding handle rod of 10 mm dia and 450 mm long including taking down old unserviceable opener, complete all as specified and directed.

S&F in replacement of service outlet having two half clamp made out of MS strip of 6 mm thick with nut bolt and rubber sealing ring suitable to fit for PVC pipe, the out let shall be threaded 40 mm size to suit the inlet of hydraunt, complete all as specified and directed.

Taking out submersible pumping set of capacity 5 to 10 HP, three phase, any type from bore well by disconnecting all electrical and mechanical connections including connected items of pump such as column pipes complete for checking, disconnecting cable and pump including lowering & reassembling the pump in the existing position by reconnecting after repair/inspection of pump including packing materials, nut bolts, securing of submerssible in column pipe by using insulated wires, cable jointing materials etc, testing and commissioning, complete all as specified and directed by Engr-in-Charge

All as per item No. 25.00 here-in- but 15 to 20 HP capacity

All as per item No. 25.00 here-in- but 30 HP to 40 HP capacity

栀
♍⁌潦⁲楤捳湯敮瑣湩⁧桴⁥潢獯整⁲異灭漠⁦湡⁹

acity from site and servicing / repairing the same by replacing coupling including nut/bolts, bearing, bushes, oil seals and reassembling and re-alignment, commissioning and testing, complete all as specified and directed by Engineer-in-charge. —
Taking out submersible pumping set/ deep well jet pumping set of any capacity, any size/ type from fountain well by disconnecting all electrical and mechanical connections including connected items of pump such as pipes, cable complete for checking & repair of pump including reassembling the pump in the existing position by reconnecting after repair/inspection of pump all as directed by Engr-in-ChargeÚM&L for Repair/overhauling of submersible pump set of capacity 5 to 10 HP by opening/de-asembling the pump including derusting, descaling, servicing, oiling/greasing & including replacement of worn out defective spare parts such as GI washer, nuts, bolts, packing and other minor parts not specifically mentioned shall be replaced where required for proper functioning of pump set including re-assembling in the existing position, testing complete all as specified and directed by Engr-in-Charge. Note :- (i) Spare parts shall be measured and paid separatly under respective item of sch "A". (ii) Rates for wshers, studs&nuts, nut & bolts and packing materilals and other minor spare parts shall be included in this item.<All as per item No. 30.00 here-in- but 15 to 20 HP capacity>All as per item No. 30.00 here-in- but 30 HP to 40 HP capacityQM&L for repair/overhauling of submersible pump/ deep well submersible pump of capacity 1 HP to 10 HP by opening/de-asembling the pump including derusting, descaling, servicing, oiling/greasing & including replacement of worn out defective parts, required GI washer, nuts, bolts and other minor parts not specifically mentioned shall be replaced where required for proper functioning of pump set, complete all as specified and directed by Engr-in-Charge. Note :- (i) Rates for washers, studs &nuts, nut & bolts and packing materilals and other minor spare parts shall be included in this item.}Supply only spare parts required for repair/ overhauling of pumps 5 to 10 HP vide Sch `A' Item No. 30.00 here-in- before :-di(a) NRV(b) Bowl body CI&(c) Stage sleeve for S/S in stage bowl(d) Bearing bush in stage bowl&(e) Gun Metal impeller of suitable dia(f) Impeller key (g) Pump motor connector CI(h) Gun Metal neck ring(j) Pump shaft stainless steel%(k) Coupling of suitable dia with key(l) Stud and nut |Supply only spare parts required for repair/ overhauling of pump 15 to 20 HP vide Sch `A' Item No. 31.00 here-in- before :-di'(c) Stage sleeve for S/S in stage bowl(j) Pump shaft stainless steelSupply only spare parts required for repair/ overhauling of pumps 30 HP to 40 HP vide Sch `A' Item No. 32.00 here-in- before :-hm(a) NRV (d) Bearing bush in stage bowl (j) Pump shaft stainless steel&(k) Coupling of suitable dia with keyš
M&L for rewinding of electric motor 3 phase, 415 Volts, 50 C/S, of capacity 2 HP to 10 HP of booster pump of any make from the pumping set, rewinding the stator coil with PVC insulated/super enamelled copper winding wire of existing type, guage and size including insulating material and reassembling and refixing the same with true alignment, testing and commissioning, complete all as specified and directed.˜
M&L for rewinding of electric motor 3 phase, 415 Volts, 50 C/S, of capacity 2 HP to 10 HP of open well submersible pump of any make from the pumping set, rewinding the stator coil with PVC insulated copper winding wire of existing type, guage and size including insulating material and reassembling and refixing the same with true alignment, testing and commissioning, complete all as specified and directed.[
M&L for rewinding of electric motor of submersible pump any make and any type of capacity 1 HP with PVC insulated copper winding wire suitable gauge/size matching to existing straightening and repairing/ claning of stator slots properly by using adequate size of sand paper including insulating materials, complete all as specified and directed. U
M&L for rewinding of electric motor of Tullu pump any make and any type of capacity 1 HP with PVC insulated copper winding wire suitable gauge/size matching to existing straightening and repairing/ claning of stator slots properly by using adequate size of sand paper including insulating materials, complete all as specified and directed. ;All as per item No. 41.00 here-in- but 15 to 20 HP capacity5All as per item No. 41.00 here-in- but 30 HP capacity5All as per item No. 41.00 here-in- but 40 HP capacityoSupply only spare parts required for repair of motor 5 HP to 10 HP vide Sch `A' Item No. 41 here-in- before :-(a) Thrust plate (b) Segment bearing complete set(c) Segment housing body CI(d) Lower bush body(e) Upper bush body(f) Pump connector(g) Upper bearing body(h) Lower bearing body(j) S/S sleeve for rotar shaft (k) Oil seal'(l) GM Bush for submersible motor pump(m) Sand guardsSupply only spare parts required for repair of motor 15 HP to 20 HP vide Sch `A' Item No. 42.00 here-in- before :-Z_uSupply only spare parts required for repair of motor 30 HP to 40 HP vide Sch `A' Item No. 43 & 44 here-in- before :-ZaÕ
M&L for rewinding of pressure pump 0.5 HP to 1 HP of any make, single phase, 240V with PVC insulated heavy duty superior quality copper winding wires of suitable gauge/size matching to existing, straightening and replacement of u/s spares cleaning winding slots properly by using adequate size of sand paper including insulating materials complete all as specified and directed. Note: Spares reqd for the same will be measured and paid separately under relevant item. rS&F in replacement of the following spare parts suitable for pressure pump 0.5 to 1HP complete all as specified :-(a) Pressure switch (b) Oil seal(c) Ball bearing (set of two) (d) ImpellaróS&F in replacement of chlorine test kit comprising of various, test tube, standard colour shades indicating the availability of residual chlorine including 100 ml orthothoduline solution, complete all specified and directed by Engr-in-Charge. °S&F in replacement of Injector valve(NRV) for dosing pump protect against backflow and generate a defined back pressure, complete all specified and directed by Engr-in-Charge. jS&F in replacement of Foot valve suction strainer for dosing pump, complete all as specified and directed.mS&F orthothoduline solution 500 ml for checking of residual chlorine, complete all as specified and directed. S& F in replacement of mug plastic with handle 500ml capacity used for pouring granuel to preparation tank/ dosing tank, complete all as specified and directed.ŠS& F in replacement of rubber gloves for preparation of chlorine in preparation tank/ dosing tank, complete all as specified and directed.àS& F in replacement of flexible PVC pipe 15/20 mm inner dia for filling of water to preparation tank/ dosing tank with all necessary connection as required in pump house chlorine room, complete all as specified and directed.uS&F in replacement of unserviceable Diaphragm of dosing pump, complete all specified and directed by Engr-in-Charge. Ã
M&L for Dewatering of under ground sump, cleaning of residual water, fungies, liquid mud, cleaning tiles of side wall and bottom surface of swimming pool approxiately 700 sqmm are with the help of soft nylon brushs and acid without damaging any tiles laid in swimming pool including cleaning of joints between tiles and refilling white cement/ apex solution between the joints and and removing dirty materials away 50 mtrs distance from the swimming pool and after cleaning the under ground sump refilling with water available from pump house of department (as required at site), complete all as specified and directed. Note :- Acid measured and paid separately under respective item of schedule “A” (BOQ).Ü匀灵汰⁹湡⁤業楸杮吠䌮䌮䄮ⴠ〹䌠汨牯湩瑡潩牧湡汵獥愠⁳硯摩穩湩⁧条湥⁴潦⁲睳浩業杮瀠潯獬愠摮攠獮牵湩⁧桴⁥潣牲捥⁴牰灯牯楴湯漠⁦桴⁥条湥⁴潦⁲牴慥浴湥⁴景眠瑡牥‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥戠⁹湅牧椭⵮桃牡敧♍⁌潦⁲敲慰物湩⁧景洠湯汢捯異灭†祢搠獩慭瑮汬湩⁧瑩⁳異灭愠摮洠瑯牯‬敲楷摮湩⁧景洠瑯牯㌠⼠‵偈椠据畬楤杮爠灥慬散敭瑮漠⁦潷湲漠瑵瀠牡獴漠⁦異灭猠捵⁨獡戠慥楲杮‬浩数汬牥‬畢桳獥攠捴‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥尮♍⁌潦⁲楦汬湩⁧景挠浯牰獥潳⁲楯景愠物挠浯牰獥潳Ⱳ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤ɞ䌀敬湡湩⁧桴⁥畳牲畯摮湩⁧牡慥†景匠楷浭湩⁧潰汯戠⁹畣瑴湩⁧敲潭楶杮琠敨朠慲獳‬桳畲獢‬畢桳獥愠潲湵⁤猠楷浭湩⁧潰汯愠摮椠獮慴汬瑡潩獮愠⁴敔档䄠敲ⱡ潓瑵⁨慃灭愠摮丠牯桴䌠浡⁰愠汬愠⁳楤捲瑥散⁤祢䔠杮⵲湩䌭慨杲⁥湡⁤敲潭楶杮映潲桴⁥慣灭獵‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮††††ਠ潎整㨠ㄠ‮桔獩瀠牡楴畣慬⁲潪⁢潴戠⁥灯牥瑡摥琠牨畯桧漠瑵琠敨挠湯牴捡⁴数楲摯琠慭湩慴湩琠敨挠敬污湥獥⁳景琠敨猠牵潲湵楤杮愠敲⁡景琠敨椠獮慴汬瑡潩祢爠浥癯湩⁧桴⁥桳畲獢戯獵敨⁳湡⁤牧獡⁳潴琠敨攠瑮物⁥慳楴晳捡楴湯漠⁦桴⁥湅牧椭⵮桃牡敧愠摮琠敨瀠牥潩楤楣祴漠⁦桴獩椠整桳污敢搠捥摩摥戠⁹湅楧敮牥椭⵮桃牡敧‮†††丠♍⁌潦⁲汣慥楮杮漠⁦癯牥栠慥⁤慴歮⁳景挠灡捡瑩⁹〱〰‰慇汬湯⁳潴ㄠ〰〰‰慧汬湯⁳潣灭楲楳杮漠⁦桴⁥潦汬睯湩⁧灯牥瑡潩獮㨠⠭⥡䐠睥瑡牥湩⁧景琠敨琠湡桳污敢挠牡楲摥漠瑵眠瑩⁨牧癡瑩瑡潩慮汦睯⠮⥢删浥癯污漠⁦敬瑦漠敶⁲楤瑲⁹慷整⁲湡⁤汳摵敧猠慨汬戠⁥慣牲敩⁤畯⹴挨 汃慥楮杮漠⁦癯牥敨摡爠獥牥潶物挠浯汰瑥汥⁹楷桴戠敬捡楨杮瀠睯敤⁲湡⁤湩整牲慮慷汬ⱳ映潬牯‬散汩湩⁧景琠湡桳污敢挠牡楲摥漠瑵戠⁹楨桧†牰獥畳敲眠瑡牥樠瑥‮牐獥畳敲漠⁦慭档湩⁥桳污潮⁴敢氠獥⁳桴湡㠠ⴰ㈱‰慢⁲湡⁤攠獮牵⁥桴瑡渠楤瑲‬污慧⁥牯洠獯⁳敲慭湩漠畳晲捡⁥景琠湡⹫搨 慄整漠⁦汣慥楮杮愠摮挠灡捡瑩⁹景琠湡楷汬戠⁥牷瑩整湯传呈眠瑩⁨桷瑩⁥慰湩⁴湩愠戠慬正瀠楡瑮摥猠畱牡⁥景猠極慴汢⁥楳敺椠扯楬整慲楴杮漠摬眠楲楴杮漠⁦湡⁹敤捳楲瑰潩楷桴瀠楡瑮琠慭捴⁨硥獩楴杮眠牯獫眠瑩⁨敬瑴牥⁳牯映杩牵獥⠠求捯Ⱬ删浯湡漠⁲湉楤湡 楳敺漠⁦慥档氠瑥整⁲楷汬渠瑯戠⁥敬獳琠慨挵⹭ܢ䌀浯牰桥湥楳敶洠楡瑮湥湡散漠⁦敤牣湩搠獯湩⁧汰湡獴椠獮慴汬摥愠⁴慶楲畯⁳湩瑳污慬楴湯⁳景䜠⁅䄨⥆䈠浡慲汵⁩景搠晩敦敲瑮挠灡捡瑩⽹潭敤潣灭楲楳杮漠⁦桴⁥潦汬睯湩㩧ਭ愨 慄汩⁹档捥楫杮漠⁦污汰湡獴映牯映湵瑣潩慮獡数瑣漠⁦敤牣湩搠獯湩⁧汰湡獴猠捵⁨獡挠敨正湩⁧景瘠污敶‬档捥楫杮漠⁦慧杵⁥瑥⁣湡⁤慭楫杮琠敨瀠慬瑮映湵瑣潩慮潦⁲灯牥瑡潩污潳戠⁹牡敲瑳湩⁧†湡⁹楫摮漠⁦敬歡条⽥汢捯慫敧漠⁦汰湡⁴湡⁹楴敭愠祮氠捯瑡潩湵敤⁲䕇⠠䙁 慂牭畡楬䄠敲⁡湡⁤敲瑣晩楹杮琠敨猠浡⁥楷桴湩㌠‰業獮愠瑦牥爠捥楥楶杮椠普牯慭楴湯映牯洠歡湩⁧畦据楴湯污 敬歡瀠潲景琠敨瀠慬瑮†祢猠楫汬摥洠捥慨楮⁣湡⁤瑯敨⁲業潮⁲慰瑲⁳潮⁴灳捥晩捩污祬洠湥楴湯摥猠慨汬愠獬敢爠灥慬散⁤桷牥⁥敲畱物摥映牯瀠潲数⁲畦据楴湯湩⁧污湯睧瑩⁨慳敦祴攠畱灩敭瑮爠煥極敲⁤潴搠瑥捥⽴瑳灯琠敨氠慥慫敧戯潬正条⁥漠慤汩⁹慢楳⁳畤祬猠杩敮⁤祢愠汬漠数慲潴獲漠⁦汰湡獴愠⁴慶楲畯⁳湩瑳污慬楴湯⁳湡⁤桴⁥慳敭猠慨汬戠⁥牰摯捵摥琠䕊䔠䴦⼠䄠䕇䔠䴯戠⁹敮瑸搠祡ਮ戨 慄汩⁹档捥楫杮漠⁦癡楡慬楢楬祴漠⁦档潬楲敮愠⁴污桴⁥異灭栠畯敳⁳湡⁤瑡氠慥瑳漠敮甠敳⁲湥⁤景攠捡⁨異灭栠畯敳‬挠敨正湩⁧景猠浡汰獥漠⁦慷整⁲瑡䌠浯慭摮䴠⁉潒浯愠⁳数⁲桴⁥楤敲瑣潩景搠捯潴⽲渠牵楳杮愠獳⁴湡⁤桴⁥慳敭戠⁥敲潣摲摥漠⁡敲楧瑳牥愠摮猠杩慮畴敲漠⁦位漠⁲数獲湯愠瑵潨楲敺⁤潴搠潳洠祡戠⁥扯慴湩摥愠摮瀠潲畤散⁤潴䔠杮⵲湩䌠慨杲⁥潦⁲敶楲楦慣楴湯攠敶祲搠祡ਮ低䕔ⴺ†ਠ椨 删捥牯⁤湯愠捣畯瑮漠⁦瑩浥丠⹯⠱⥡愠摮⠠⥢琠敢瀠潲畤散⁤桷汩⁥汣楡業杮琠敨删剁ਮ椨⥩†潃瑳漠⁦慧歳瑥‬畮⽴潢瑬ⱳ眠獡敨獲‬畬牢捩湡獴‬楯牧慥敳攠捴愠摮漠桴牥洠湩牯瀠牡獴渠瑯猠数楣楦慣汬⁹敭瑮潩敮⁤桳污污潳戠⁥敲汰捡摥眠敨敲爠煥極敲⁤潦⁲牰灯牥映湵瑣潩楮杮猠慨汬搠敥敭⁤潴戠⁥湩汣摵摥椠桴⁥畱瑯摥甠楮⁴慲整‮丠硥牴⁡慰浹湥⁴桳污敢洠摡⁥潴琠敨挠湯牴捡潴⁲湯琠楨⁳捡潣湵⹴⠊楩⥩儠潵整⁤慲整眠汩潮⁴湩汣摵⁥潦⁲灯牥瑡潩景瀠慬瑮⹳传数慲楴湯漠⁦汰湡⁴桳污敢挠牡楲摥漠瑵戠⁹桴⁥敤慰瑲敭瑮ਮ椨⥶唠楮⁴桳污敢〠‸潨牵⁳数⁲慤啕♓⁆湩爠灥慬散敭瑮漠⁦剆⁐牰灥牡瑡潩慴歮⼠搠獯湩⁧慴歮漠⁦〱‰瑌Ⱳ䘠偒搠獯湩Ⱨ琠灯搠慩㔠〴浭‬敮⁴敨杩瑨㔠㔷洠楤ⱡ戠瑯潴㠴洰Ɑ挠湯楳瑳湩⁧景眠瑡牥椠汮瑥氠湩ⱥ搠慲湩‬癯牥汦睯氠癥汥朠畡敧椠獮数瑣潩潰瑲‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮Ƽ䐀獩潣湮捥楴杮‬慴楫杮漠瑵愠摮爠灥慬散敭瑮漠⁦潄楺杮椠橮捥潴⁲㌲嘰㔠䠰⁺湩汣摵湩⁧湯漯晦猠楷桴愠摮猠潴敫⁳ 楍畮整漠⁦慍⁸㌱‵湡⁤楍楮畭㔱眠瑩⁨潭潴Ⱳ䐠獩档牡敧瀠敲獳牵⁥〱杋振㉭‬楈桧映潬⁷慲整〠㈭‰䱐⁈湩汣摵湩⁧捡散獳牯敩⁳湩敪瑣潩档捥汶癡ⱥ映潯⁴慶癬ⱥ猠捵楴湯愠摮搠汥癩牥⁹敶瑮‬剎ⱖ攠摮挠灡⁳楷桴椠瑮牥慮桴敲摡⁳潴猠捥牵⁥湯琠敨椠橮捥潴⁲湡⁤慭湩瀠灩⁥楬敮‬楷桴猠極慴汢⁥潭湵楴杮戠慲正瑥ⱳ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤✠
楄捳湯敮瑣湩⁧湡⁤慴楫杮漠瑵琠敨甠獮牥楶散扡敬ㄠ〲眠瑡獴愠楧慴潴⁲潭潴Ⱳ㤠〶删䵐Ⱐ猠湩汧⁥桰獡⁥湡⁤敲楷摮湩⁧楷桴挠灯数⁲湥浡汥敬⁤楷敲⁳景猠極慴汢⁥慧杵ⱥ爠灥慬散敭瑮漠⁦戠慥楲杮‬戠慲正瑥⁳湡⁤潴敬慲据⁥楲杮⁳畳瑩扡敬映牯愠楧慴潴⁲湩汣摵湩⁧爠晥硩湩Ⱨ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤쨠♓⁆湩爠灥慬散敭瑮漠⁦噐⽃偕䍖匯湹桴瑥捩瀠浵⁰畴敢漠⁦敬杮桴ㄠ‹浣愠摮搠慩ㄠ挠畳瑩扡敬映牯搠捥楲潤楳杮瀠浵⁰湩汣摵湩⁧慴楫杮搠睯汯⁤湵敳癲捩慥汢⁥異灭琠扵‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮²匀䘦椠敲汰捡浥湥⁴景挠敨正瘠污敶搠捵扫汩畳瑩扡敬映牯搠捥楲潤楳杮瀠浵⁰湩汣摵湩⁧慴楫杮搠睯汯⁤湵敳癲捩慥汢⁥档捥慶癬⁥畤正戠汩ⱬ挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⹤鸠♓⁆湩爠灥慬散敭瑮漠⁦⼳∸眠楨整猠捵楴湯搯獩档牡敧戠牯⁥祮潬牢楡敤⁤慨摲†噐⁃楰数猠極慴汢⁥潦⁲敤牣湩搠獯湩⁧異灭‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮˺䴀䰦映牯琠獥楴杮漠⁦慷整⁲慳灭敬⠠楢汯杯捩污愠摮挠敨業慣湡污獹獩 牦浯䴠乎呉漠⁲湡⁹敲異整⁤潇瑶氠扡牯瑡牯⹹吠敨猠浡汰⁥景眠瑡牥眠汩敢挠汯敬瑣摥映潲楤晦牥湥⁴異灭栠畯敳⁳潬慣整⁤瑡䄠物䘠牯散猠慴楴湯‬慂牭畡楬椠畳瑩扡敬猠整汲獩摥戠瑯汴⁥獡椠瑮浩瑡摥戠⁹敲異整⁤潧敶湲敭瑮氠扡牯瑡牯⁹湡⁤桴⁥慷整⁲楷汬戠⁥整瑳摥映牯倠ⱈ琠牵楢楤祴‬捡摩瑩⹹䄠慫楬楮祴‬䑔ⱓ吠卓‬協‬桃潬楲敤ⱳ吠瑯污䠠牡湤獥ⱳ䴠乐‬敆‬獁‬⁆潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥戠⁹湅楧敮牥椭⵮桃牡敧‮潎整㨠匠浡汰⁥景眠瑡牥琠敢挠汯敬瑣摥椠牐獥湥散漠⁦湅楧敮牥椭⵮档牡敧漠⁲䕊䔠䴯愠摮匠浡汰⁥桳污敢映牯慷摲摥琠慌⁢畤祬猠慥敬⁤桴⁥慳灭敬戠瑯汴⁥祢䔠杮湩敥⵲湩䌭慨杲⹥吠敨䰠扡眠汩敢猠汥捥整⁤祢䔠杮湩敥⵲湩䌭慨杲⁥湡⁤整瑳湩⁧桳污敢搠湯⁥湯攠敶祲琠牨敥洠湯桴映牯愠汬瀠浵⁰潨獵獥♍⁌潦⁲敔瑳湩⁧景眠瑡牥猠浡汰⁥戨潩潬楧慣湡⁤档浥捩污愠慮祬楳⁳牦浯愠祮䜠癯⁴畡桴氠扡牯瑡牯⥹‮桔⁥慳灭敬漠⁦慷整⁲楷汬戠⁥潣汬捥整⁤牦浯愠⁴䌠湥牴污匠睥条⁥牔慥浴湥⁴汐湡⁴瑡匠畯桴挠浡Ɒ䄠物䘠牯散匠慴楴湯‬慂牭畡楬椠畳瑩扡敬猠整敲楬敳⁤戠瑯汴⁥獡椠瑮浩瑡摥戠⁹敲異整⁤潧敶湲敭瑮氠扡牯瑡瑯⁹湡⁤桴⁥慷整⁲楷汬戠⁥整瑳摥映牯䄠灰牥湥散‬摏畯Ⱳ琠瑯污搠獩潳癬摥猠汯摩‬畳灳湥敤⁤潳楬Ɽ倠⁈慶畬ⱥ漠汩☠朠敲獡ⱥ䄠浭湯捩污渠瑩潲敧Ɱ䘠敲⁥流潭楮⁡丨㍈Ⱙ䈠潩挠敨業慣硯杹湥搠浥湡⁤䈨䑏Ⱙ䌠敨業慣硯杹湥搠浥湡⁤䌨䑏 潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥戠⁹湅楧敮牥椭⵮档牡敧眨瑡牥眠汩敢挠汯敬瑣摥椠牰獥湥散漠⁦䕊䔠䴯†⽉⁃景眠瑡牥猠灵汰⁹潦⁲整瑳湩⁧牦浯琠敨氠扡愠⁳畡桴牯穩摥戠⁹湅楧敮牥椭⵮桃牡敧‮潎整›敔瑳湩⁧楷汬戠⁥慣牲敩⁤畯⁴湯洠湯桴祬戠獡獩ਮƵ䴀䰦映牯愠瑣慵敤整瑣湩⁧桴⁥敬歡条⁥景攠楸瑳湩⁧䥇瀠灩⁥楬敮愠祮琠灹⁥慬摩椠牴湥档獥 慷汬 汦潯⁲湩汣摵湩⁧硥慣慶楴湯甠瑰湯⁥畣慴楫杮漠瑵攠楸瑳湩⁧楰数楬敮愠摮爠灥楡⁲湩汣摵湩⁧敲汰捡浥湥⁴景䜠⁉楦瑴湩⁧畳档愠⁳整ⱥ猠捯敫ⱴ爠摥捵牥‬汥潢ⱷ甠楮湯‬瑥⁣潣灭敬整愠摮爠晥硩湩⁧晡整⁲整瑳湩⁧潦⁲敬歡条⁥牰潯⁦楰数氠湩⁥湡⁤湩汣摵湩⁧敲畴湲湩⁧楦汬湩⁧湡⁤慭楫杮朠潯⁤楤瑳牵敢⁤畳晲捡ⱥ挠浯汰瑥⁥潦⁲潦汬睯湩⁧潢敲漠⁦䥇瀠灩⁥楬敮㨠‭⠀⥡㐠‰潴㔠‰浭䜠⁉楰数⠀⥢ㄠ‵潴㈠‵浭䜠⁉楰数䌀浵䬀٧敐⁲偈匀瑥䔀捡⁨敓ॴ慅档䐠畲ͭ杋ͳ瑌Ͳ煓੭敐⁲慇

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job

Each Job