Construction of New Judicial Courts Complex (Tower of Justice) Gurugram (Pdg. Compact Sub Station)

Amount

SAFETY ITEMS Supply & Erection of mild steel bucket stand suitable for 6 nos. fire buckets, (but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect upto the entire satisfaction Engineer in charge of the work (size 6'x4' made of GI pipe 32 mm dia)

HT CABLE Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 240 to 400 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 240 to 400 sqmm

SUBSTATION EQUIPMENTS TRANSFORMER/PACKAGE TYPE SUBSTATION: Supply, Installation, Testing and Commisioning of 11kV Package Substation, suitable for Outdoor installation with natural cooling with Non - extensible RMU consisting of 2 Nos. feeder with motorised operated fixed type load break switch & 1 No. feeder with motorized operated fixed-type VCB 630A, 1 No. 11kV/433V, 2000kVA Mineral Oil Cooled Transformer, 1 set of LT device, FRTU for data integration, all in a common GI enclosure, factory built ready for connection type, internal GI earthling provided complete with other associated equipment etc. complete as required conforming to IEC 62271-202 for Internal Arc Compliance (IAC AB 21kA/1-sec) and relevant IS specifications, as per details given below including RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions for 2000 KVA substation ( Make: ABB/Schneider/Siemens) other specifications as per DNIT in Pdf

11kV HT METERING PANEL BOARD: Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of cubicle type 11 kV metering panel fabricated out of 14 SWG CRCA sheet steel, free standing floor readable dust and vermin proof with arrangement for sealing the covers and doors, re-inforcement of suitable size angle iron, channels, T sections of flats wherever necessary. Cable gland plate shall be provided on bottom of metering panel. Panel shall be treated with all anti-corrosion process prior to powder coating. Approval shall be obtained from concerened Electricity Board for the shop drawings before fabrication. other specifications as per DNIT in Pdf HT Metering PANEL complete as above

HT CABLE AND TERMINATION Supplying and laying under ground heavy duty 11KV (E) grade 3c 300 sqmm XLPE PVC insulated aluminium conductor armoured cable 1 P.mtr. below ground level with sand & bricks with all labour and material including digging and refilling of trench as required

SAFETY ITEMS Supply and erection of Rubber Mat 1mx2mmx 3mm thick suitable for 11/33 KVA as per IS No. 15652C/M/L 3017739 as per approved by Chief Electrical inspector, Govt. of Haryana.

Supply and erection of fire bucket of G.I. sheet of 24 gauge write with " FIRE" as per fire specification.

Supply & erection of fire existinguishers ISI mark(AJAY Make) CO2 type 4.5 kg. Capacity as per IS:7285 duly erected/ hang on wall with hooks with all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

LOHAN ELECTRICAL WORKS