Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC GANESH MURTHI NAGAR PART III GALI NO 01 ROOM NO 82 A CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹42.7 L+₹5.8 L (15.7%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹44.8 L+₹7.9 L (21.3%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹48.2 L+₹11.3 L (30.6%)Rejected-Finance ROOM NO 214 GANESH MURTHY NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8955 COMPREHENSIVE MAINT OF HISTORICAL BLDG AT ND MBI UNDER GE NW KUNJALI
2023_MES_596223_1
8955/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹90,000
Yes
21 Oct 2023
17 May 2023
21 Jun 2023
24 May 2023
19 Jun 2023
31 May 2023
17 May 2023 - 24 May 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rabbish of the premises.
M&L for (450mm x300mm x 7mm or 600x300x7mm) thick coloured glazed ceramic tiles as in dado/vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.
Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness all as specified and directed.
M&L for 20 mm thick Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M&L for 20 mm thick granite machine cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M &L for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
Taking up or down existing GI water tubing complete with all fittings of 15 mm bore all as specified and directed.
Taking up or down existing GI water tubing complete with all fittings of 20 mm bore all as specified and directed.
Taking up or down existing GI water tubing complete with all fittings of 25 to 32 mm bore all as specified and directed.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 25 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F in repirs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.
S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including fixing clips, bends, elbows, shoes etc complete all as specified and as directed.
S &F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed.
S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed .
S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.
S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-Charge.
M&L for Plain, black, mild steel sheeting, 1.25 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
S & F in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete
Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)
M & L for 1st class hard wood Plain (Berma teak wood), solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze complete all as specified and as directed.
S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed .
S&F Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and directed.
M&L for Second class hardwood (berma teak wood) solid core minimum thickness 50mm decorated wooden door as per directed by engineer in charge including first class (berma teak wood) decorated beading of any size at the door and construction of arc (radious not less than 90 cm) and outside around the door as per directed by EIC incl all decorated brass fitting such as hinges (brass 5 Inch heavy hies 5/32x5/32 SS-PIN), heavy loaded foundation box, decorated handle (length not less than 30 Cm), (two number handle in each door shutter)pivot spring, toughend glass/figured glass, glass/plane surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler and applying one or more coats on new wooden surface complete all as specified and directed by EIC.
Taking down cement plaster of any description on brick, stone or concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water upto G Plus 9th floor of bldg incl scaffolding complete all as specified and directed.
M&L for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.
M&L for Rendering 20mm thick on fair faces of brick work or concrete surface with two coats i.e. (15mm thick back coat in CM 1:6 and 5 mm thick finish coat in cement mortar 1:4 ) with using WPC finished even and smooth without using extra cement including all safety measures and scaffolding upto any height. All as specified and directed. Note : WPC will be measured & paid separately.
M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.
Supply only integral water proofing compound.
M & L for New treatment/Old of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed by Engr-in-Charge.
Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G plus 9th floor of bldg complete all as specified and directed. (Make Ultima or equivalent)
M&L for New plastering wall/ceiling preparation and applying two coat of oil bound distemper over a coat of 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparation of surfaces complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed Engr-in-Charge.
M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending bolts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.
S&F Medium density fibre board, 12 mm thick exterior grade, fixed to timber/Aluminium framework with screws. All as specified and directed.
M&L for Plywood, 12 mm thick grade BWP, type BB, fixed with screws to timber frame work. All as specified and directed.
M&L for 0.9 MM thick sunmica decorative texture finish laminated type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions. All as specified and directed.
S&F aluminium window, doors with shutters / frames / partitions made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed.
S&F in repair 3 mm thick Aluminium Composite panel cladding plain metallic of approved colour/shade to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and as directed.
Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L for 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.
S&F 8 to 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles SS studs, fittings for door pivots etc complete all as specified and directed by Engr-in-Charge.
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed by Engr-in-Charge.
S&Fof in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge.
S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge.
M&L for 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end.complete all as specified and as directed by Engr-in-Charge.
S&F PVC connection on pipe 450mm long with brass nut bolt complete all as specified and as directed by Engr-in-Charge.
S&F PVC waste pipe 32mm dia 800mm long with socket sutable for WHB/Sink/urinal complete all as specified and as directed by Engr-in-Charge.
S&F push taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule and fixed in repairs. All as specified and directed.
S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair.
S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).
S&F in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed.
S&F in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC.
All as per Item No 72 above but MS Plate (Plain or Chequred).
S&F for rolled mild steel sctions of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc. all as specified and directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walk ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M&L for 100 mm thick cement concrete 1:4:8 type D-2 (Using 40 mm graded stone agg) as in sub base.
M&L for 100 mm thick cement concrete type B-1 , 1:2:4 (Using 20 mm graded stone agg) as in hardstanding laid in alternate panel all as specified.
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
M&L for preparation of New painted steel surfaces of any description over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of primer. All as specified and directed.
S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0. Complete all as specified and as directed by Engr-in-Charge.
S&F in repairs for 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 etc complete all as specified and directed by Engr-in-charge.
ditto all as per item No 82 above but 75 mm in size
S & F in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed by Engr-in-Charge. .
S&F in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.
S&F in repair150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.
S&F in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and directed.
S&F in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed
S&F 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.
S&F 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.
S&F in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed
S&F in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed
S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed.
Demolition of brick/stone masonry built in CM. all as specified.
M&L for brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.
M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4.
M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair all as specified.
M & L for Providing, cement concrete type B1 1:2:4 (Using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges. All as specified and directed.
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge.
S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair.
S&F in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap .complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends.complete all as specified and directed by Engr-in-Charge.
S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.
M&L in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.
S&F aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.
Material & labour for gently cleaning the surface of the stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting, followed up by gentle brushing with soft nylon brushes as specified. Gentle surface cleaning may include using water misting and mild pH balanced surfactant as specified for indicated areas to remove surface dirt, grit, surface accretions, lime wash etc by means of water misting and pH balance surfactants and cleaning as directed by EIC. Note:- Quoted rate shall be inclusive of removing all vegetation on wall surfaces, Chajjas etc and erraction and dismantling of MS tubular double scaffolding upto G+9 storey building and provision of necessary safety equipment to the skilled worker to carryout the work.
M&L for raking out cement loose/crack pointing or any other hard material used and careful re-pointing and repair to be carried of the damaged pointing to walls externally and internally above the base of vaults and ape dones for poor joints, in lime morrtar 1:3 (1 Lime, 3 sand mix to be approved by consultant before application) and filling in of any holes/damage areas of stone that may have to be filled in lime mortar. Pointing to be carefully colour matched using additives such as kattha, sand, stone dust and such additives to exactly preparation of batches of samples upto 20 samples of colour mached lime mortar for approval by Engr-in-charge. The contractor to ensure use of masking tape and sharp specialised spatula and tools to ensure clear lines and high level of workmanship on site all as specified and directed by Engr-in-charge.
M&L for application of transperent polyurethene paint over stone masonary as per the manufacturers instruction over a coat of primer all as specified and directed. Make:- Asian paint, Berger, Shalimar as approved by Garrison Engineer . Note :- i) The woerk is to be carried out in heritage bldg/Hall, hence before starting of work all instructions given by EIC/Consultant (if any) are to be strictly followed. Any damage to structure due to negligence of contractor shall be repaired and directed without any extra cost to the entire satisfaction of EIC/Consultant failing which the same shall be got done throught other agency at contractor risk & cost. ii) Guarantted of PU paint if any to be submitted by the contractor in writing and necessary amount towards retention money to be also retained in this regards.
Dismantling of Mangalore pattern roofing tiles with ceiling tiles or slate roofing.
M&L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry. Complete all as specified and directed.
Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section.
M&L for 2nd class hardwood exc 15 sqcm but nexc 25sqcm, Clean sawn battens at 15 cm centres
M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6. Complete all as specified and directed.
Taking down and refixing for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry. Complete all as specified and directed.
Removing excavated material/bldg material and debris exc. 150 Km but n exc. 25 Km and depositing where directed, in soil.
MAA VAISHNAV CONSTRUCTION
ROHIT CONSTRUCTION
Pragathi Infrastructure Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .