Lonad Strengthening and protection for Sump and WTP with ACPRS PLCR mehod

Amount

Item Description

Washing, Surface Prepration, acid cleaning and final wash by clean water including all labours material and machinery completed as directed by engineering incharge

Providing and flooding high molecular weight lowest viscous thermoset Monomer MONOPOL (<10CPsviscocity) at the dosage of 2Kg/sq m on the deck bridge slab for rendering intrinsic impermeability, improving cohesion and sealing micropores in deck bridge slab. The procedure includes cleaning the slab with wire brushing and air blowing, flooding the slab at the dosage of 2Kgs/sqm over cleaned surface and brooming it further to allow fullest penetration and complete receival inside the concrete.The material shall have following properties: Material-Low viscosity high molecular weight thermosett resin grout,Viscosity-Less than 10 centipoise per second, Mechanical strength properties of the material (after7days) Compressive strength (ASTM-D-695-96) Min 60MPa,Tensile strength(ASTM-D-638-95) Min. 18 MPa, Flexure (ASTM-D-790-96) Min. 30 MPa.

Providing and applying well mixed polymer cement slurry in ratio1:2 over well soaked but surface dry concrete and steel rebar for adhesion of fresh cement and sand mortar as per specification as directed etc. complete.(item includes use of polymers like sikalatex or similar materials of relevant specification and scaffolding for height 8 to 10 meter.)

Providing and Applying HVI coating treatment (PLCR) electfical panel room flooring by insulating polymatheane / Epoxy (PLCR) screed coating with required thickness completed seal coating with all labours, materials, tools, equipments etc. complete.

Providing & applying PICC or equivalent Coating for concrete Bridge repair work :-Providing and applying Poly Ironite Ceramic Cementitious (PICC) or equivalent Coating material of Self curing ,High Abrasion resistant , Non shrink ,High strength,UV resistant, repair mortar coating on bond coat Kelox water missable epoxy of on concrete surface upto 10 mm thickness including Cleaning the concrete surface of bridge by grinding the surface by grinder machine with wire brush /diamond wheel, removing existing loose particles etc. by using grinder, wire brush,breaker machine, water jet(using other mechanical / manual means) also removing of algae fungi by special chemical of clonon etc.complete with all leads and lifts, Material, Machinery, Labour, Scaffolding etc. complete as per specification and as directed by engineer-in-charge.

Providing and Applying ACPRS PLCR PU ANTI SKID SYSTEM followed by solvent free promatrix PU/ eoixy primer followed by high built promatrix LCNR PU Coating form exposed on the external concrets /steel surface having two component system solvent free, safe for foot traffic, minor impact resistance flooring treatment applied on exposed concrete / existing RCC flooring surfaces. Manufacturer should have the Dakks certification as well as ISO 9001:2015 accredited for manufacturing and formulation.

Providing and injecting epoxy grout including structuring of cracks in the body of slab girder, fixing inlet tube arrangement including cost of materials,machinery required for the work labour charges etc. (2kg of grout is considered per hole)

AV AND COMPANY (BID ID -6650906)

NIRMAL AQUASOL PVT LTD (BID ID -6651641)