Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
21 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE (NW) Mumbai
CWE (NW) Mumbai
PROVISION OF ALUMINIUM PARTITION AND DOORS IN GYNAC OPD, LABOUR ROOM, PSY WARD AND POST OP WARD AT HOSPITAL BUILDING AT INHS ASVINI UNDER AGE(I) ASVINI, COLABA, MUMBAI
2026_MES_792167_1
8040/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
120 days
AGE (I) Asvini
Class D Category a (i)
7 documents required · 7 mandatory
₹500
AGE (I) ASVINI
₹59,000
Yes
2 Oct 2026
2 Oct 2026
22 Oct 2026
2 Oct 2026
21 Oct 2026
16 Oct 2026
2 Oct 2026 - 10 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5sqm but n.exc 4 sqm each complete all as specified and as directed. | 25 | Each | - | - |
| 2 | Taking down Aluminium doors/partition with shutters including glass, particle board and fittings complete all as specified and directed | 50 | Sqm | - | - |
| 3 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dashfasteners of required dia and size including necessary filling up the gaps at junctions i,e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling CP brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Note- (i) Glazing/wiremesh shall be measured and paid separately.
(ii) Item shall be paid as per the weight of Aluminium section however the rate quoted shall be inclusive of the cost of neoprene beading glazing pins, screws, handle etc which shall not be measured for arriving the weight. | 3,250 | Kg | - | - |
| 4 | S & F sheet glasses,opaque / frosted on one side 5mm thick glazing all with aluminum beading, glazing pin etc, or with oil putty in square n exc .5 sqm in each pane | 600 | Sqm | - | - |
| 5 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. | 15 | Each | - | - |
| 6 | S&F 300mm long aluminum anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy,ISI marked,complete all as specified and as directed. | 30 | Each | - | - |
| 7 | S&F extruded aluminium alloy handles, fabricated type, anodised 75 mm size, ISI marked,complete all as specified and as directed. | 60 | Each | - | - |
| 8 | S&F SS butt hinges medium weight cold rolled stainless steel of 100mm long,complete all as specified and as directed. | 60 | Each | - | - |
| 9 | S&F aluminium anodised barrel tower bolts of extruded section, 150 mm length, ISI marked, complete all as specified and as directed | 50 | Each | - | - |
| 10 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. | 300 | Kg | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.41 MB
07 PS APPX C to G Revised.pdf
Tender Documents • 0.29 MB
01MasterNIT.pdf
Tender Documents • 0.39 MB
03 Genpages.pdf
Tender Documents • 0.92 MB
04 PS.pdf
Tender Documents • 0.26 MB
05 ps.pdf
Tender Documents • 0.39 MB
6 CESC MAKES BR.pdf
Tender Documents • 0.47 MB
BOQ_888202.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .