Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.4 LAccepted-AOC | L1 | Accepted-AOC First lowest | |
| 2 | L2₹44.0 L+₹1.7 L (3.98%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹44.1 L+₹1.9 L (4.38%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹44.2 L+₹2.0 L (4.66%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹45.2 L+₹2.9 L (6.92%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
6 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
PROVN OF JAFRI WALL IN BACK SIDE OF BLDG NO P 501 OR LINE OF 3 CORPS PRO UNIT PARKING AND HARD STANDING FOR SHOURYA MESS 02 CGI STEEL DOOR FOR STORE PURPOSE AT BLDG NO P397 OF 4003 FD HOSP AND ADDN/ ALTN TO BLDG NO T1 OP T293 T26 OF 3 CESR AT RMS
2022_MES_556345_2
8500/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(I)
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹82,000
4 Feb 2023
16 Nov 2022
8 Dec 2022
16 Nov 2022
6 Dec 2022
24 Nov 2022
16 Nov 2022 - 21 Nov 2022
Amount
B/R Portion Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of Soil.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil
Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames.
All as per item No 4 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each `
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level.
Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed.
Dismantling Plain or corrugated steel sheeting, sheets in roof covering.
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .
Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.
M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete.
M&L Hard Core of broken stone and boulders of gauze not exc 63mm deposited, spread and leveled in layers not exc 15cm thick watered and rammed to a true surface.
M&L 100mm thick Cement concrete 1:2:4 type B- 2, (40mm graded aggregate) as in floor finished smooth and even complete all as specified and as directed
M & L PCC 1:3:6 type C-2 (using 40mm grade stone aggregate as in foundation etc and mass concrete.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
M&L rendering 15 mm thick on other than fair faces of Brick work/PCC block masonry or Concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement all as specified and as directed.
M & L rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete work even and smooth without using extra cement.
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple.
M&L for preparing of new plastered surfaces and applying two coats of exterior weather proof paint (acryalic emulsion paint) over coat of primer complete all as specifed and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.
M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary form work, applying evenly a coat of blown type bitumen at 1.5 kg per sqm and binding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0,30 to 0.50 Kg per sqm complete .
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils
Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point
M&L for 40 mm thick precast RCC jallies type B0 , 1:2:4 (12.5 mm graded stone aggregate) (measured solid) , including all mould- ings etc complete all as specifed and as directed.
M&L RCC M-30 design mix as in plinth beams, lintel, lintel band and gable beams etc including formwork complete all as specified and as directed.
M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm.
All as per item No 35 here-in-before above but above 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders.
M & L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
S & F 0.50mm thick pre-painted galvalume aluminiun zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , ridge and velly complete all as specified and directed.
S&F steel work in tubular trusses, post, purlins including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 complete all as specified and directed by Engineer - in – Charge
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash all as specified & directed by Engineer-in-Charge
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F for framed work such as grills, gratings, doors etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works conforming to Fe 410v-W (Gde-E- 250) quality- A complete all as specified and as directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A complete all as specified and as directed
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps.
M&L for second class hardwood as in scantlings clean sawn timber fixed.
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW.
S&F size of frame 125 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,
M&L for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
M&L for 35 mm thick 2nd class hardwood plain framed panelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.
M/L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples.
S & F 100 size stainless steel butt hinges complete all as specified and directed
S & F 75 size stainless steel butt hinges complete all as specified and directed
Supply & Fixing 150 mm Aluminium handles, cast type, anodised
Supply & Fixing 100 mm Aluminium handles, cast type, anodised
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete
M&L for preparation of new plastered or un plastered surface of walls including cornices, pilasters etc and applying two coats of cement base paint complete all as specified and directed.
M&L for applying two coats of oil bound distemper on new plastered inculding 2mm thick putty surfaces of walls including preparation of surface complete all as specified and directed.
Material and labour preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed
M&L for preparation of new painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed
All as per item No 69 here-in-before here in before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces
M & L for PCC 1:2:4 type B0 (using 12.50mm graded stone aggregate) 25 mm thick as in sub base to receive tiles.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and mirror polishing including 15mm screed bed or bedding layer in 1:4 CM complete all as specified as directed
All as per Item No 72 here-in-before but on vertical surfaces over 15mm screed bed or bedding layer in 1:3 CM complete all as specified and as directed by Engineer-in-Charge.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) in section exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Same as above but on vertical surfaces such as skirting , dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.
M&L for coloured Glazed ceramic tiles in vertical surface exceeding 0.06 sqm but not exceeding 0.11 sqm, thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick CM (1:4) backing coat.
M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick CM (1:4) screed bed.
S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and directed.
M&L TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for precast cement concrete type B1 1:2:4 (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and directed.
M&L for RCC (Nominal Mix), Type B1, (20 mm Agg) as in slab supported on walls ,beams and columns in floors, roofs, landings .
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore.
S&F tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed
S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover complete all as directed.
S&F in repairs one piece EWC with soft close seat cover and twin flush fittings 735 x 370 x 765 mm (snow white) S trap 300mm and fittings complete all as directed (Make Cera Cristy and cat No 2075 or equivalent)
S&F in repairs Ceramic over counter wash basin, glossy and polished finish super white colour oval shape (snow white) size 570 x 450x 135 mm complete all as directed (Make Cera or equivalent)
S&F in repairs CP Central hole basin mixer fancy type 15mm dia all as specified and directed and as approved by GE.
S&F CP in repairs Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed for WC (Make - SONA/ADSON/ ESSCO).
S & F in repairs PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 ltrs capacity incl flush pipe complete all as specified.
S&F in repairs for 15mm dia of pipe bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed.
S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spfd & directed.
S&F in repairs for 15mm dia of pipe stop valves,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed .
S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.
S/F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as spfd & directed
Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified.
S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).
S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screwscomplete all as specified.
S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers
S&F corner glass shelf assembly 250mm radius made of 6mm thick craaylic glass, with CP railing, fixed with suitable rowal plug & screws complete all as specified and directed.
S&F CP toilet paper holder fixed to walls complete all as specified and directed and approved by GE
S & F urinal speader fixed with complete fittings (Make : cera and equivalent)
S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor
S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor
S&F of 110mm dia PVC (SWR) bends
S&F 75mm PVC(SWR) bends any radius with acess door.
S&F of 75mm dia PVC (SWR) Vent cowl
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof
M&L dismantling water tank of exc 250 ltr and not exc 500ltr Capacity.
S&F rotational moulded polyethylene 500Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. .
S&F 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified and directed.
S&F powder coating aluminium frame and shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.fixed type without sash bar, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make, fixing with dash fasteners of required dia and size, including ecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including necessary locking arrangements all complete as specified and the directions of Engineer-in-Charge.
S&F fo powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
S & F for powder coating aluminium door shutters, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing ,handles 2 Nos in each door,hinges, anodised aluminium snap beading screws,mortice lock with keys etc. complete all as specified.
M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & fixed with screws to timber frame work and all as specified and directed by Engineer-in Charge.
M&L for PCC 1:4:8 type D-2 150mm thick (40mm thick stone agg) as in sub base of floor.
M & L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes
M & L for chequered cement concrete tiles of Size 25mm thick any description jointed and pointed in neat cement slurry in floors with grey cement and pigment
M/L PCC (1:2:4) type B1 using 20mm graded stone agg in plinth courses, string courses, parapets, kerbs, bed plates and the like including weathering slightly rounded or chamfered angles and throating, as directed
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping complete all as specified.
M&L for precast cement concrete type B1 1:2:4 (Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as 'specified and as directed.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make : Richa/ RR Kabel/ Havells. Make of casing/capping : Richa/ Prestoplast/ Finolex
One light/ Bell Point controlled by one way switch .
One Exh/Ceiling fan point controlled by one, one way switch.
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 130 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A Make:- Anchor/ Legrand/ Havells
M&L for Socket outlet, 2 in 1, 3 pin 5A flush type Make:- Anchor/ Legrand/ Havells
M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush type Make:- Anchor/ Legrand/ Havells
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type Make:- Anchor/ Legrand/ Havells
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Anchor/ Legrand/ Havells
M&L for Bell push 6A Make:- Havells/Legrand/Anchor
M&L for Bell Multi Music type Make:- Havells/Legrand/Anchor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Anchor/ Legrand/ Havells
M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length. Make:- Richa/Finolex/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed. Make : Bajaj/CG/Havells
S&F for , IP>= 20, Class-I, LED Light fitting 1 x 20 watt (4 Ft), 240 V, PF-0.9, CRI >= 80, CT>= 6000 K, Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed.
All as per item No 142.00 above but 10 watt LED, 2' batten (Warm white), Wall mounted with polycarbonate housing/ batten. Make Havells Cat No LHEXBQP5IN1W009 or equivalent in Bajaj/Philips/Crompton Greaves
Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and as directed. Make :Bajaj/Havells/Crompton Greaves
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.Make :Bajaj/Havells/Crompton Greaves
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Note :MCB SPN/SP will be measured and paid separately. Make:- Legrand
All as per item No 148 here-in-beforebut MCB DB SPN 8 Way complete all as specified and as directed. Make : Legrand/ABB/ Siemens
All as per item No 148 here-in-before but MCB DB SPN 4 Way complete all as specified and as directed. Make : Legrand/ABB/ Siemens
Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and as directed. Make: Legrand Cat No 408636 or equivalent in ABB/Siemens.
M&L for MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/ Siemens
M&L for MCB SP 6-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB 'C' series incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/ Siemens
Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/ Havells/ Polycab
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified and as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified and as directed.
M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. Make : Jindal/ TATA/ Prakash Surya
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
M/S Lucky Builders
M/S VIKASH TRADERS
M/S DEEKSHA ENTERPRISES
M/s K P Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .