PROVN OF GUARD REST ROOM AND PROVN OF ONE AC POINT ALONGWITH SPECIAL REPAIR OF SPLIT AC, DESERT COOLER AGAINST BER ITEMS AT AF STN DADRI IN AOR OF GE (AF) FARIDABAD (3Rd CALL)

Amount

Supplying transporting to site, erecting and fixing in position, steel tubular swaged and welded poles of under mentioned height and type 410 SP 55, IS 2713 maked with mild steel base of 11 mtrs height ( Fillet welded to poles), pole cap/ finial taper plug, bolts, mnuts, wahsers etc, including painting on the outside with two coats of aluminium paint over a coat of red oxide primer on exposed surfaces and black bituminous paint on steel surface embeded in concrete and painting 03 nos band/ strips with fluorescent, PO box red synthetic enamel paint (30 cm wide each) at a distance of 30 cm from plinth block and numbering of poles, complete all as specified and directed by Engineer-in-Charge.

M&L for cross arms bracings supports, clamps and back plates fabricated from structural steel section including nuts bolts, washers, welding bending cold or hot, drilling holes for bolts etc complete all as specified and directed by Engineer-in-Charge.

M&L for resin cast L.V 1.1 V indoor/out door end termination for XLPE cable 3.5 core suitable for 400 Sqmm cable complete all as specified and directed by Engineer-in-Charge.

Supplying installing, testing and commissioning of air break, gang operated, triple pole switch, outdoor, vertical mounting type of capacity 200 amps, ISI marked, mechanically operated on insulators and frame work with operating mechanism worked from ground lwvel, with locking arrange4ments including 65mm pad lockes with two keys, complete with fuse mounts, fuse carriers and HT fuse elements having 11000 amp rating suitable for HT KV, 50 Hz Ac supply incl necessary electric connections complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and connecting HT cable under ground XLPE insulated screened PVC bedded, galvanised strip or wire armoured, electric power cables ( heavy duty) 95 Sqmm 3 core 11 KV grade with starndedard aluminium conductor complete all as specified and directed by Engineer-in-Charge.

Supply & fix cable end jointing kit for 11KV grade cable for outdoor type termination cold shrinkable joint complete with jointing material and accessories suitable for 3 Core 95 SQ MM core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and directed by Engineer-in-Charge.

Supply, installationing, testing and commissioning outdoor type step down transformer, 11 KV/433 volts (at No load) AC 3 phase 50 Hz, 160 KVA capacity, core type, double copper wound, oil immersed, naturally cooled, oil natural- air natural (ONAN), with external cooling tubes, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector group DYn-11 with neutral brought out on secondary side (LV Side) and having taping at + 2.5% and + 5% on HV side to be changed by means of hand operated off load tap changer gear. The maximum temperature rise should not exceed 45 degree celsius in oil and 55 degree celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temp of 40 degree celsius. The transformer shall be IS- 1180 Level -II marked and shall comprise of the following complete all as specified and directed by Engineer-in-Charge:-

Note : All as per item No 07 Contd/- :- (a) One cable box on HT side(primary) consisting of 3 Nos porcelain bushing with copper rods, complete with nuts and washers, with one no cable gland suitable for reception/taking out 3 core 95 sqmm HT 11 KV grade, XLPE heavy duty armoured cable including gland joint and jointing material (b) One cable box on LT side consiting of four Nos porecelain bushing with copper rods, complete with nuts and washers, with cable glands suitable for reception/ taking out of 1 nos 3.5 core 400 sqmm , LT 1100 volts grade, PVC/XLPE insulated and PVC sheathed, heavy duty, armoured cables including jointing materials (c) Oil conservator with filter type drain valve and oil level gauge. (d) De hydrating breather with first fill of dehydrating agent.(Silica gel) (e) Explosive vent, thermometer pocket on tank cover, oil level gauge, oil drain filter valve, lifting lugs, oil filling hole with cap/ plug with connection plate complete, air release valve plug and four Nos plain solid cast steel detachable rollers. (f) One No 100 mm dia, dial type thermometer, vapour pressure type, having range 0-120 degree celsius with metal guard having maximum perimeter temperature reading indicator with re setting device.

Note : All as per item No 07 Contd/- :- (g) Two earthing terminals on tank cover to facilitate fixing of 50x6mm galvanised iron earth strip for earthing of body. (h) Rating plate and terminals marking plate. (i) Extra bushing for neutral, in the LT cable box for providing independent set of earthing for neutral. (j) First fill of new and unused transformer oil, IS-335 marked filtered and tested upto 60 KV dielectric strength at 2.5 mm air gap between testing electrodes. (k) Providing adequate size and Nos of channels, embeded in base floor, for movement of transformer. (l) Transformer lifting lugs for main tank and top cover.

Note : All as per item No 07 Contd/- :- (m) Providing plateform for transformer of size 3.0 x 3.0 x 1.5 m high from GL including earthwork PCC 1:5:10 type E2 for foundation brick work in CM 1:6 PCC, 1:2:4 type B-1 in copping plaster 10 mm thick in 1:6 on brick / complete surface PCC 1:4:8 type B-1 sub base 75 mm thick as in floor PCC 1:2:4 type B-1 100 mm thick floor using extra cement complete. Chain link fencing.1.8 mtr high made out of 4 mm dia GI wire 150 x 100 mm mesh MS work angle iron 50x50x6 mm as fencing post in embeded in brick / PCC work at 2 mtr interval each side as approved 01 No. steel gate (1.5 m clear) span with locking arrangement made out of 15 mm dia MS rod & 50x50x6 mm angle iron frame painting with 2 coat aluminium paint over a coat of red oxide primer and 3 coats of white washing on cement work complete suitable to mounting transformer

Supply, and fixing bus bar chamber 4 Way outdoor type factory made out of CRCA sheet dust & vermin proof , front opening door having locking arrangement totally enclosed weather proof, antirusted powder coated painted including aluminium Bus Bar of 200 Amps rating bus size 45 cm long x 50mm wide x 15mm thick, 440 volts, 3 Phase 4 wire having suitable gap to connect the cables of size 95 Sqmm 3.5 core and bus mounted on suitable type of insulators incl coloured insulating sleeve on each complete with bottom removable gland plates for inccomming and out going cables, bus chamber mounted on MS angle stand made of MS angle 50mm x 50 mm x 5 mm and should having minimium 45 Cm gap below bus chamber incl necessary PCC foundation work complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanisedusing galvanised iron strip 32×6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 400 sq mm 3½ core complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 sq mm 3½ core complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq mm 3½ core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and connecting cable under ground XLPE insulated screened PVC bedded, galvanised strip or wire armoured, electric power cables ( heavy duty) with 1100 Volts grade with starndedard aluminium conductor inclusive connected with thimbles, nutt bolt by crimping tool etc complete of size 70 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and connecting cable under ground XLPE insulated screened PVC bedded, galvanised strip or wire armoured, electric power cables ( heavy duty) with 1100 Volts grade with starndedard aluminium conductor inclusive connected with thimbles, nutt bolt by crimping tool etc complete of size 50 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and connecting cable under ground XLPE insulated screened PVC bedded, galvanised strip or wire armoured, electric power cables ( heavy duty) with 1100 Volts grade with starndedard aluminium conductor inclusive connected with thimbles, nutt bolt by crimping tool etc complete of size 35 sq mm 3.5 core complete all as specified and directed by Engineer-in-Charge.

S&F Single pole and neutral modular enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps for AC complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed by Engineer-in-Charge.

Supply of brick sub class B laid dry in trenches over the cable ad joining each other widthwise for cable protection complete all as specified and directed by Engineer-in-Charge.

M&L for Auguring of holes into horizontal position under road by means mechanical figs after doing ultra sound to prevent any damage to existing cable / pipe lines coming in routes, 1.5 mtr deep and not exc 50m long complete all as specified and directed by Engineer-in-Charge.

Supply and fix air cooled split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 Star Rating including taking down existing old Split AC and deposited in MES store yard complete all as specified and directed by Engineer-in-Charge.

Supply and fix air cooled split unit air conditioner electric driven, single phase of capacity of 2 TR, BEE 5 Star Rating including taking down existing old Split AC and deposited in MES store yard complete all as specified and directed by Engineer-in-Charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4.0 KVA complete all as specified and directed by Engineer-in-Charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and directed by Engineer-in-Charge.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic/PVC Body complete all as specified and directed by Engineer-in-Charge.

Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft loose soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exceeding 1.50m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, foundation etc and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

All as per item No 31 above but exceeding 1.50m but not exceeding 3.0m in depth complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in cement concrete in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced cement concrete M-25 using 20mm graded aggregates in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above but in columns complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above but in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above but in Slabs supported on walls, beams and columns in floors, roofs, landings, balxonies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

All as per item No 34 above but in Chajjas complete all as specified and directed by Engineer-in-Charge.

M&L Form work to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engineer-in-Charge.

M&L Form work to sides of rough finished square, rectaungular or polygonal surfaces of of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-Charge.

M&L Form work to sides and soffit of rough finished flat surfaces of soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engineer-in-Charge.

M&L Form work to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engineer-in-Charge.

M&L Form work to rough finished flat surfaces of chullah hoods, chajjas, troughs and similar items in- cluding edges complete all as specified and directed by Engineer-in-Charge.

M&L Form work to rough rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete rail- ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon- tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engineer-in-Charge.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

All as per item No 45 above but 6 mm dia and over upto and including 10mm dia in stirrups etc complete all as specified and directed by Engineer-in-Charge.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L Brick work with subclass 'B' bricks, straight or curved on plan to any radious in half brick thick walls in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L filling under floors or in foundations with approved soil including spreading, levellig in layers n exc 25cm thick and well ramming, watering as reqd complete all as specified and directed by Engineer-in-Charge.

Returning filling in and including spreading levelling watering and well ramming in layers n exc 25cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub-base of floors complete all as specified and directed by Engineer-in-Charge.

M&L Termite Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed by Engineer-in-Charge.

M&L Termite Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed by Engineer-in-Charge.

M&L Termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed by Engineer-in-Charge.

M&L Termite Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed by Engineer-in-Charge.

M&L Termite Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed by Engineer-in-Charge.

S&F Steel windows made up of box steel section of 16 gauge ms sheet inb outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shwon in drg No CEUZ/TD/1302/2009 Sheet 1/3 consisting with two Nos mild steel pintol hinges 75 mm long, two Nos stove enemaled tower bolts 150 mm long and 1 No steel handle, deovitailed are welded each panels complete with necessary cleat and stopers complete all as specified and directed by Engineer-in-Charge. (MS gaurd bar/grill work will be measured by Engr-in-Charge)

Steel ventilator made up of box steel section of 16 gauge MS sheet frame, fixed type suitable to fix half portion wire cloth and half portion galss with suitable MS beading or flat or oil putty as shown in drawing No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 fixed ccomplete all as specified and directed by Engineer-in-Charge. (MS gaurd bar/grill work will be measured by Engr-in-Charge.)

S&F Pressed steel frames size 125 mm x 60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick Factory made second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick Factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 150mm long anodised aluminium alloy handles, fabricated type complete all as specified and directed by Engineer-in-Charge.

S&F 200mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on steel surfaces, over a coat of red oxide primer incl preparation of new steel surfaces 10cm in width or grith not ohter wise described complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint on wooden surfaces, over a coat of pink primer incl preparation of new wooden surfaces 10cm in width or grith not ohter wise described complete all as specified and directed by Engineer-in-Charge.

M&L Machine cut kota stone slab flooring 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20mm thick screed bed in 1:4 complete all as specified and directed by Engineer-in-Charge.

All as per item No 74 above but in skirting includig 10mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (size 300x300), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge.

M&L Glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work or concrete sur- faces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement with WPC 3% weight of cement complete all as specified and directed by Engineer-in-Charge. (WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.

All as per item No 80 above but 5 mm thick in CM 1:3 in Ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new plastered surfaces of wall and applying two oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new plastered surfaces of wall and applying three coats of white wash in ceilings complete all as specified and directed by Engineer-in-Charge.

M&L for 50 mm thick in Plain cement concrete type C1 ( 1:3:6) (using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engineer-in-Charge.

M&L Hardcore broken stone/boudlers of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.

S&F Wash basins, Vitreous China (flat back or angle back type) size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe but including brackets complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China urinals, bowl type (back or corner wall type) size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe,Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms). (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F PVC valveless, syphonic action type, flushing cistern (10 Ltrs), low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engineer-in-Charge.

S&F 32mm dia PVC Waste pipe 600mm long complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

All as per item No 95 above but 110 dia complete all as specified and directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bends complete all as specified and directed by Engineer-in-Charge.

All as per item No 96 above but 110mm dia complete all as specified and directed by Engineer-in-Charge.

All as per item No 96 but with access door complete all as specified and directed by Engineer-in-Charge.

S&F 32mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed by Engineer-in-Charge.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application with end lap 100mm and mid 75mm complete all as specified and directed by Engineer-in-Charge.

M&L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed by Engineer-in-Charge.

S&F 15 MM Tubes, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 20 MM Tubes, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 15 MM Stop/angle valves, cast copper alloy fancy type, chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 15 MM Stop valves(concealed type )with long shank , cast copper alloy fancy type, chromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 20MM stop valve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

S&F 15MM dia bib taps, cast copper ally fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 125 MM dia Chromium plated shower roses with arm with swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

S&F 20mm Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick cement concrete 1:4:8 type D2 using 40mm aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

M&L for Laying Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade of approved make with grey cement and pigment complete all as specified and directed by Engineer-in-Charge.

30 mm thick Sand filling under floors or as in sand cusioning for interlocking paver block fixing complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete as in edges rounded or chamfered on edges type B1 1:2:4 using 20 mm graded aggregate complete all as specified and directed by Engineer-in-Charge.

Concrete bed to drain pipes150 mm dia including packing under, and hunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-in-Charge.

M&L for RCC drain pipes class NP3 With collors 150 mm dia laid in trenches and joints complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:3:6 type C2 ( 40mm graded aggregate) as in sub base and mass concrete complete all as specified and directed by Engineer-in-Charge.

Providing cement concrete type B-1 1:2:4 in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed by Engineer-in-Charge.

Brick work with sub-class `B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M & L rendering 15 mm thick on fair faces of brick work /concrete surfaces, finishing even and smooth without using extra cement in cement mortar 1 : 3 complete all as specified and directed by Engineer-in-Charge.

Providing precast cement concrete type B-1 1:2:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed by Engineer-in-Charge.

LLDPE septic tank 10 users conventional type designed to carry sewage and sullage water,exvation in any type of soil,PCC1:4:8 below foundation, Vent shaft ,connection etc complete all as specified and directed by Engineer-in-Charge.

Excavation over areas n exc 1.5 mtr in deep and getting out as in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, n exc 1.5 m wide and exc 3.0 and n exc 4.5 m in depth: for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out complete all as specified and directed by Engineer-in-Charge.

All as per item No 126 but exc 4.5 m and n.exc 6.0 m depth complete all as specified and directed by Engineer-in-Charge.

M&L Brick work with sub-class 'B' bricks, in one brick thick honeycomb walling built in CM 1:4. complete all as specified and directed by Engineer-in-Charge.

All as per item No 128 but Brick bats filling complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring conceled with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, fixed in wall, on roof with GI saddles GI screws, rawal plugs (concealed conduit in wall wiring) with all fittings including Tee, junction boxes and provision of pressed steel terminal box of suitable size with 3 mm thick hylam laminated white sheet cover for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 volts grade cable with multistranded coper conductor of size 1.5 Sq mm (Nominal area) complete all as specified and as directed by Engineer-in-Charge. (a) One light/fan point controlled by one switch.

All as per item No 130 but One socket point on same board with other switches complete all as specified and directed by Engineer-in-Charge.

All as per item No 130 but One 3 pin 5 Amps socket outlet independent with cables 1.5 sqmm size complete all as specified and directed by Engineer-in-Charge.

All same as per item No 130 above but with conductor of size 2.5 Sq mm (nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 1.5 Sq mm PVC insulated stranded copper conductor cable complete all as specified and directed by Engineer-in-Charge.

M&L for Modular switch 1 way 6A, 1 module complete all as specified and directed by Engineer-in-Charge.

M&L for Modular switch 1 way 16A, 1 module complete all as specified and directed by Engineer-in-Charge.

M&L for Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

M & L for Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

S & F Fan step regulator, 120W - 2 module complete all as specified and directed by Engineer-in-Charge.

S&F for ceiling rose surface bakelite 65x50mm two to three terminals complete all as specified and directed by Engineer-in-Charge.

S&F for Modulat plate cover with frame White cover plate with frame, 1 module complete all as specified and directed by Engineer-in-Charge.

S&F for Modulat plate cover with frame White cover plate with frame, 3 module complete all as specified and as directed by Engineer-in-Charge.

S&F for Modulat plate cover with frame White cover plate with frame, 8 module complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Sub main wiring with two single core, 4 Sqmm, PVC insulated PVC unsheathed stranded FR copper conductor cable in and including PVC concealed/ surface conduit of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

S& F fixing MCB DB sheet metal enclosure 8 way 200 Amps busbar double door complete all as specified and directed by Engineer-in-Charge.

S& F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning MCB SPN 40 A C Series Amps complete all as specified and directed by Engineer-in-Charge.

S& F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning MCB SP 6-32 A C Series Amps complete all as specified and directed by Engineer-in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp Single pole complete all as specified and directed by Engineer-in-Charge.

Supply and lay pipe galvanized, “ 'medium grad',galvanised,with all fitting;laid in trenches but 20 mm (3/4”) dia dia complete all as specified and directed by Engineer-in-Charge.

Supply and lay pipe galvanized, “ 'medium grad',galvanised,with all fitting;laid in trenches but 25 mm (1”) dia dia complete all as specified and directed by Engineer-in-Charge.

S&F 20MM stop valve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 25MM stop valve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Laying and testing of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 Volts grade (Heavy Duty) aluminium conductor of cross sectional area 25 Sqmm 4 core with sutiable size of calmps on wall/under trenches etc complete all as specified and directed by Engineer-in-Charge.

Supply and Laying and testing of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured LT 1100 Volts grade (Heavy Duty) aluminium conductor of cross sectional area 16 Sqmm 4 core with sutiable size of calmps on wall/under trenches etc complete all as specified and directed by Engineer-in-Charge.

Supply, and fixing bus bar chamber 4 Way outdoor type factory made out of CRCA sheet dust & vermin proof , front opening door having locking arrangement totally enclosed weather proof, antirusted powder coated painted including aluminium Bus Bar of 200 Amps rating bus size 45 cm long x 50mm wide x 15mm thick, 440 volts, 3 Phase 4 wire having suitable gap to connect the cables of size 95 Sqmm 3.5 core and bus mounted on suitable type of insulators incl coloured insulating sleeve on each complete with bottom removable gland plates for inccomming and out going cables, bus chamber mounted on MS angle stand made of MS angle 50mm x 50 mm x 5 mm and should having minimium 45 Cm gap below bus chamber incl necessary PCC foundation work complete all as specified and directed by Engineer-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 liter, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all accessories complete all as specified and directed by Engineer-in-Charge.

GARG CONSTRUCTION CO