REPAIRS TO PERIMETER FENCING PATH HARDSTANDING DRAINAGE ETC AT ZONE A OF SONEGAON NAGPUR

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete/brick masonry etc and making good disturbed ground complete all as specified and directed.

Dismantling Chain link fencing wire mesh or barbed wire any type complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and directed.

M&L for providing PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

Demolition of PCC in ground floor and paving n. exc. 15cm thick below or above ground level including removal of debris outside MD land complete all as specified and directed.

M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 all as specified and as directed.

M&L for mild steel work as in posts and struts in nfencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillet for securing wire mesh etc., including all necessary drilling, bolting or riveting etc., and similar work.etc and similar work conforming to Fe-290 Grade E-165 (MS pipe) complete all as specified and directed.

S&F 11mm to 15mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. Notes : Chain link fencing, nut bolts, and line wires shall be measured separately under supply only rate.

Supply only mild steel galvanised chain link fencing 4mm dia of any size or type complete all as specified and directed.

M&L for plain mild steel round bars of 10mm dia and over cut to length, bent to shape required for straining line wires including binding wire in fencing using Fe-410-W (Gde.E-250) quality-A or Fe290 (Gde-E-165) quality steel complete all as specified and directed.

Restraining and resecuring of existing galvanised barbed wire fencing complete including making good staples etc all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick/ concrete surface complete all as specified and directed.

M&L for applying three coats of white wash including preparation of new plastered surfaces of walls complete all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments laid as per manufacturer's instructions complete all as specified and directed.

M&L for interlocking paver tiles 25mm thickness, with grey cement & pigment any shape and size set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for providing 100mm thick PCC 1:2:4, type B1 using 20mm graded aggregate as in sub base of floor / hard standing all as specified and directed.

M/s ABHIMAN HEGDE

Alert Multipurpose Services

M/s JAYPEE ENTERPRISES