Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹47.7 L+₹83,028.44 (1.77%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹47.9 L+₹1.0 L (2.21%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹48.6 L+₹1.7 L (3.67%)Rejected-Finance C O M S MITHUN ENTERPRISES MINNIEBAY JUNCTION PORT BLAIR 744103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹49.7 L+₹2.8 L (6.04%)Rejected-Finance INDUSTRIAL ESTATE DOLLYGUNJ PORT BLAIR 744 103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Bandi Sreenihar IDSE EE
Garrison Engineer Minniebay Port Blair 744103
SPL REPAIR TO MD ACCN QTR NO P-87/8, P-72/1 AT LANE NO 1 AND P-127/8,P-83/8 AT LANE NO 2 AT AJAY BAUGH AND MINOR WORK UNDER GE MINNIE BAY, PORT BLAIR
2022_MES_560849_1
8194/E8
Open Tender
Civil Works
Item Rate
180 days
Minniebay Port Blair AN Islands
As per documents
10 documents required · 10 mandatory
₹500
GE Minniebay
₹92,000
Yes
9 Feb 2023
1 Nov 2022
8 Dec 2022
2 Nov 2022
5 Dec 2022
19 Nov 2022
Amount
Demolition of existing vitreous china squatting pan with integral foot rest including P or S trap alongwith unreinforced cement/lime concrete bed including dismantling, floor, hearth/tiling and cement mortar screed rubbish off the premises depositing outside MD land and the following procedure shall be adopted step by step :- (a) Cleaning the sunken portion of toilet/bathroom/WC thoroughly to remove laitence,dirt,dust etc. (b) Sanitary pipes entering through the walls and floor shall be sealed with Dr.Fixit Bathseal tape and the gaps shall be sealed with non shrink cementitous grout Dr.Fixit Bathseal Grout Nahani traps etc to be fitted securely and the gaps around shall be arrested in same manner. (c) Forming angle fillet/coving all along the junction of wall and floor of size 40mm x 40mm using Dr Fixit Pidicrete URP and applying15mm thick rendering using cement mortar 1:3 mixed with water proofing compound on sunken floor. (d) Apply bituminous modified polymer coating Dr.Fixit Bathseal Plus on floor and all along the junction and including upto height of 150mm on wall.Allow drying time of 6 to 8 hrs and then apply second coat of treatment. (e) Apply cementitous waterproof coating of Dr.Fixit Pidifin 2 K on floor and all along the junction and including upto height of 2.1m on wall (applicable for bathroom).Allow drying time of 6 to 8 hrs and then apply second coat of treatment.
(f) 40mm thick Plain Cement Concrete 1:2:4 C2 using 12.5mm crushed stoned aggregate by mixing necessary liquid water proofing compound laid in slope of 1:60 towards the outer face of wall as topping layer. (g) Fill up the sunken portion using Plain Cement Concrete lean mix 1:5:10 E2 using 40mm crushed stoned aggregate. Note:Necessary 20mm CPVC spout pipe shall be fixed with outer projection of 300mm from outer wall and included in this quoted rate. Necessary Ponding test shall be carried out and leakages if any shall be rectified by contractor duly approved by GE and cost of the same included in this quoted rate
Demoliton of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for joint free Coloured Non-Skid Ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.18 Sqm but n exc 0.36 sqm in floors etc colour as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-Charge.
M&L for Non skid ceramic tiles edge to edge joint 7 to 8 mm thick area of each tiles exc 0.18 Sqm but n exc 0.36 sqm on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match with floor tiles including 10 mm thick backing plaster in CM (1:4) complete all as specified and directed by Engineer-in-Charge.
M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge.
M&L for Glazed Ceramic tiles 300x200x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed by Engineer-in-Charge.
M&L Granite (of any type) 16 to 20 mm thick machine cut fixed on slab,window cill etc , bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, moulding & polishing over and including 20 mm thick screed in CM (1:4) all as directed by Engr in charge
M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge.
Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and directed by Engineer-in-Charge.
M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed by Engineer-in-Charge.
Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M & L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacturer's instructions and finishing the top surface even and fair complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound shall be measured and paid separately as supply only .
Supply only Integral water proofing compound ISI marked complete all as specified and directed by Engineer-in-Charge..
M & L Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engineer-in-Charge.
M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
M&L preparing newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over a primer complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing treatment on ceiling and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
M & L for complete removal of existing old treatment of wall surfaces and applying Two coats of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed by Engineer-in-Charge.
M & L for preparation of old surfaces and applying one coat of 100% Premium exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed by Engineer-in-Charge.
M & L for preparation of new plastered wall surfaces andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed by Engineer-in-Charge.
Taking up or down 20 mm bore tubing and connections,fitting and removing off the site complete all as specified and directed by Engineer-in-Charge.
Taking up or down 25/32 mm bore tubing and connections fitting and removing off the site complete all as specified and directed by Engineer-in-Charge.
Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.
Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 x 1/2) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
M & L for Reinforced Cement Concrete 1:2:4 type B1 Nominal mix using 20 mm graded stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, deck slab, shelves and like including necessary formwork,scaffholding for height of (G+4) bldg complete all as specified and directed by Engineer-in-Charge.
M & L for Reinforced Cement Concrete 1:2:4 type B1 Nominal mix using 20 mm graded stone aggregate as in column,pillar,piers and like including necessary formwork,scaffholding for height of (G+4) bldg complete all as specified and directed by Engineer-in-Charge.
M & L for Reinforced Cement Concrete 1:2:4 type B1 Nominal mix using 20 mm graded stone aggregate as in chajjas,facia projection and like necessary formwork,scaffholding for height of (G+4) bldg complete all as specified and directed by Engineer-in-Charge.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking and hooking ends and binding with MS wire (annealed) of dia not less than 0.90mm complete all as specified and directed by Engineer-in-Charge.
M & L for TMT bar 5mm dia and over upto and including 10 mm cut to length, bend to shape required including cranking bending & hooking ends & binding with MS wire annealed not less 0.9mm dia for stirrups/binders all as specified and as directed.
Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified
S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and directed by Engineer-in-Charge.
S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed by Engineer-in-Charge.
S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade St - 240, Medium Grade of any dia complete all as specified and as directed.
S&F Joist,channel,angle or tee sections,fixed independently ,without connecting plates,etc (cut to ordinary lengths i.e within 20 mm of the length indicated) Fe 410-W (Gde E-250 quality -A) complete all as specified and as directed.
M&L for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and directed by Engineer-in-Charge.
S & F Mild steel screw bolts (machine made) of any dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as specified and directed by Engineer-in-Charge.
M & L for providing Plain Cement Concrete type B1 (1:2:4) Nominal mix using 20 mm graded aggregate as in copings,apex stones,bed plates etc including formwork complete all as specified and directed by Engineer-in-Charge.
M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
S&F aluminium flat as wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and directed by Engineer-in-Charge.
M&L for removing loose and broken concrete by chiseling/ mechanically etc from the roof slab, column, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and washing with clean water with pressure and removing rubbish off the premises to a distance not exceeding 50 mtrs and including necessary safety precautions and scaffolding up to a height of 12 mtrs complete all as specified and as directed by Engineer- in- charge.
M&L for providing and applying rust remover to the exposed corroded reinforcement as per manufacturer's instruction including removing of concrete all around reinforcement by manual methods such as hammering the rebar, using wire brushes, salt paper, chiseling, etc (if left uncleared) including applying two coats of anticorrosive primer over dry steel surfaces after allowing due time for removal of rust complete as directed by Engineer-In-Charge. Note : The circumferential area around rusted bars along the length shall be measured and paid under this item.
M&L for applying one coat of epoxy bonding coat (two component epoxy resin & filler material) on dry exposed surfaces of cementitious substrate of soffit of slab, column, beam and similar structural members to create bonding with new Polymer modified mortar or micro concrete as per manufacture's instruction complete all as specified and as directed by Engineer-in-Charge. Note : Contractor is deemed to have accepted the existing condition of structures before quoting and shall liable for one more coat of above item if desired layer not obtained during the execution as directed by Engineer-in-Charge.
M&L for rendering the identified RCC surfaces with 15mm average thick cement mortar (1:3) on gunited surface by using POLYMER MODIFIED MORTAR in single layer of relevant proportion and weight of polymer, cement and filler material as per approved make, blended to a required consistency, applying, finishing and curing as per manufacturer's instructions including necessary scaffolding, formwork complete all as specified and as directed by Engr-in-Charge. Note for item No 53 to 56:- (i) The work under item No 52 to 55 shall be carried out by authorised agent/representative of manufacturer only (ii) Defect liability of these items shall be 5 years from the certified date of completion (iii) An amount of 3% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of defect liability period as mentioned above
M&L for Preparation of old wooden surfaces exc. 10cm width and girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.
S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm rudraksh colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge.
S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed by Engineer-in-Charge.
Supply only 4 mm Plain sheet glass ordinary quality ,in square exc 0.5 sqm each complete all as specified and directed by Engineer-in-Charge.
Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engineer-in-Charge.
S & F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including taking down all as specified.
Supply only Figured glass 4 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane.
Refixing shutter of any description not exceeding 1 Sqm in the same location all as specified and as directed.
Refixing shutter of any description exceeding 1 Sqm and not exceeding 2 sq m in the same location all as specified and as directed.
S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed by Engineer-in-Charge.
Cutting holes exc. half brick but not exc one brick in brick walls built in CM or cement lime mortar & stone walls built in lime mortar for inserting holdfasts & making good dismantled portion in CM (1:3) or PCC (1:2:4) Type B-1 as required complete all as specified and directed by Engineer-in-Charge.
M & L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintel hinges; large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way & three way straps,plate washers & similar small articles conforming to Fe290-0 Gde E-165
S & F second class hard wood factory made 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and directed by Engineer-in-Charge.
M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.
S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.
S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.
S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and directed by Engineer-in-Charge.
S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed by Engineer-in-Charge.
S & F stainless steel butt hinges of 150 mm long ISI marked fixed with brass screws complete all as specified and directed by Engineer-in-Charge.
S & F stainless steel butt hinges 100 mm long ISI marked fixed with brass screws complete all as specified and directed by Engineer-in-Charge.
S & F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 18 mm plywood, grade BWP, type BB fixed in cup board shutters, shelves & partition complete all as specified and directed by Engineer-in-Charge.
M&L18 to 20mm thick pre laminated HDF panels of interior grade type-II with melamine finish of approved shade for kitchen cabinet/wardrobe/wall paneling fixing with necessary fitting like keku fitting,spring clip,hanger plate,push fix or stud fitting and providing 0.9mm thick Decorative laminates type I surface finish, colour and pattern as approved incl all necessary cutting to the size and pasting to the wood surface with and including approved synthetic adhesive as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.
S&F 30mm width continuous (piano) hinges mild steel finish or electrogalvanised complete all as specified and directed by Engineer-in-Charge.
S&F 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.
S&F stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters complete all as specified and directed by Engineer-in-Charge.
S & F in repair fancy type curtain Rod, stainless steel,chromium plated 25 mm dia with stops, rollers etc complete all as specified and directed by Engineer-in-Charge.
S & F in repair brass brackets chromium plated suitable for curtain Rod 25 mm dia complete all as specified and directed by Engineer-in-Charge.
S & F Stainless Steel plate rack of size 910 mm X 960 mm of super deluxe model, suitable for 12 plates made with 22 gauge sheet and weight not less than 5.5 Kg, complete all as specified and directed by Engineer-in-Charge.
S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and directed by Engineer-in-Charge.
S & F in repairs vitreous china wash hand basin, white, flat back of size 550 mm X 400 mm excluding pillar tap, and waste fittings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, complete all as specified and as directed by Engr-in-Charge.
S & F 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC flexible waste pipe of 32 /40 mm for wash hand basin and Kitchen sink complete all as specified and directed by Engineer-in-Charge.
S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.
S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing etc complete all as specified and directed by Engineer-in-Charge.
S & F Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.
S & F Bib Taps, long boby with flange cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and directed by Engineer-in-Charge.
S&F brass chromium plated telescopic Health Faucet (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and directed by Engineer-in-Charge.
S&F brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and directed by Engineer-in-Charge.
S & F Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws complete all as specified and directed by Engineer-in-Charge.
S & F PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed by Engineer-in-Charge.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long of approved quality complete all as specified and directed by Engineer-in-Charge.
S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repairs Vitreous China wash down watercloset pan (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc,complete all as specified and directed by Engineer-in-Charge.
Dismantling of cast iron or reinforced concrete / PVC (SWR) drain pipes of size 75/100 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge.
S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and directed by Engineer-in-Charge.
S & F 75mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) bends with access door 75mm dia complete all as specified and directed by Engineer-in-Charge.
S&F in repair 75mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S & F 75mm dia out let, PVC (SWR) Floor Trap with SS grating including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engineer-in-Charge.
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 110 mm bore PVC [SWR] branch piece, single (single Y) equal or unequal with access door including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S & F in repairs 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S & F 110 mm bore PVC [SWR] Bends with oval access door of any radius including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S&F in repair 110mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and directed by Engineer-in-Charge.
M & L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in sub base, plinth protection etc including formwork complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs stainless steel friction stay hinges 200 x19 x1.90 mm of standard size complete all as specified and directed by Engineer-in-Charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable main switches ,DBs and making good disturbed surfaces of walls/ floors to match the existing surfaces complete all as specified and directed by Engineer-in-Charge.
M & L for point wiring ,wire drawn through in and including PVC concealed conduit using rigid non metallic ISI marked 20mm PVC conduit and with 1.5 sqmm PVC FRLSH insulated(red for phase and black for neutral) sheathed , multi stranded copper conductor 1100 volt grade cable and 1.5 sqmm green in colour PVC insulated multy stranded copper conductor cable for earth continuity connected to common earth bus incl factory made metal sheet terminal box modular flush type of thickness not less than 3.00mm( required as per site condition), for mounting fittings such as switches, sockets, fan regulators, bell push etc and including all other fixing accessories for the following :- Note:- Cost of Modular metal flush box and white cover plate with frame shall deemed to be included in this quoted item.
One light point controlled by one one way switch complete all as specified and directed by Engineer-in-Charge.
One ceiling fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge.
One switch socket 5 pin 5/6 Amps flush type on independent board complete all as specified and directed by Engineer-in-Charge.
One switch socket 5 pin 5/6 Amps flush type on same board complete all as specified and directed by Engineer-in-Charge.
One exhaust fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge.
One two way point controlled by two way switch complete all as specified and directed by Engineer-in-Charge.
One bell/ buzzer point controlled by one push button complete all as specified and directed by Engineer-in-Charge.
All as per item No.128 above but with 2.5 sqmm FRLSH cable for one socket 5 pin 15/16Amps flush type on independent board with including earthwire complete.
All as per item No.128 above but with 4.0 sqmm FRLSH cable for geyser Metal clad socket 20Amps flush type on independent board including earthwire complete all as specified and directed by Engineer-in-Charge.
M & L for point wiring ,wire drawn through in and including PVC casing & capping using PVC casing & capping and with 1.5 sqmm PVC FRLSH insulated(red for phase and black for neutral) sheathed , multi stranded copper conductor 1100 volt grade cable and 1.5 sqmm green in colour PVC insulated multy stranded copper conductor cable for earth continuity connected to common earth bus incl factory made metal sheet terminal box modular flush type of thickness not less than 3.00mm( required as per site condition), for mounting fittings such as switches, sockets, fan regulators, bell push etc and including all other fixing accessiories for Mote : Cost of Modular metal flush box and white cover plate with frame shall deemed to be included in this quoted item
One switch socket 5 pin 5/6 Amps flush type on independent board complete all as specified and directed by Engineer-in-Charge.
One switch socket 5 pin 5/6 Amps flush type on same board complete all as specified and directed by Engineer-in-Charge.
All as per item No 131 above but with 2.5 Sqmm FRLSH cablve for one socket 3/5 pin 15/16Amps flush type on independent board with including earthwire complete all as specified and directed by Engineer-in-Charge.
Supply and fix Modular switch 1 way 5/6amps 1 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix Modular switch 1 way 16amps, 1 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix Modular switch 2 way 6amps, 1 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix Modular Bell push 6amps 1 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix Bell Multi Music type complete all as specified and directed by Engineer-in-Charge.
Supply and fix modular socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.
Supply and fix modular fan step regulator, 60 W - 2 module complete all as specified and directed by Engineer-in-Charge.
Supply and Fix rigid non-metallic 20mm PVC conduit ISI marked excluding junction/ terminal box but including of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engineer-in-Charge.
Supply and Fix Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.
Supply and fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed by Engineer-in-Charge.
Material and labour for surface/concealed sub main wiring with two run single core 6 Sq mm and one run of 6 Sq mm as earth continuity conductor 1100 V grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked (IS-694) drawn through and including PVC conduit ISI marked including connected accessories such bends,elbow,tees, support etc fixed in wall/roof/ floor etc complete all as directed by Engr-in-charge Note :-02runs of 6 Sq mm for phase and neutral and 01 run 6 Sqmm for earth and one run of PVC conduit along with accessories will be measure as one unit run.
All as per item No 143 above but with 4.0 sqmm FRLSH cable complete all as directed by Engr-in-charge
S&F LED tube light fitting, 1x20W, 230V, wall mounted LED batten, with polycarbonate housing & integrated electronic driver complete all as specified and directed by Engineer-in-Charge.
S&F LED tube light fitting, 1x10W, 230V, wall mounted LED batten, with polycarbonate housing & integrated electronic driver complete all as specified and directed by Engineer-in-Charge.
Supply and fix LED bulb 0.5W complete all as specified and directed by Engineer-in-Charge.
S&F MCB single pole 6 to 32 Amps, 240 volts 50 Hz AC supply,breadking capacity 10kA, 'C' complete all as specified and as directed by Engr-in-Charge
S&F MCB TPN 63 Amps, 240 volts 50 Hz AC supply,breadking capacity 10kA, 'C' complete all as specified and as directed by Engr-in-Charge
S&F MCB SPN 6 to 32amps, 10KA, 'C' series, 240 V complete all as specified and as directed
S&F MCB SPN 40amps, 10KA, 'C' series, 240 V complete all as specified and as directed
Taking down old MCCB TPN/ FP of capacity 63 Amps and supply and fixing of thermal type of MCCB FP 16 KA 63 Amps complete all as directed
Taking down old MCCB TPN/Four pole cover of capacity of 63- 160 Amps and supply and fixing MCCB TPN/FP cover of capacity of 63- 160 Amps complete all as directed
S&F in repairs MCB DB SPN 12 way sheet metal double door enclosure of suitable size for mounting MCB 230 Volts with 200 Amps rated bus bar,earth bar,neutral link etc complete all as specified and as directed by Engineer-in-Charge.
All as per item No 154 above but of MCB DB SPN 8 way complete all as specified and as directed by Engineer-in-Charge.
All as per item No 154 above but of MCB DB SPN 4 way complete all as specified and as directed by Engineer-in-Charge.
M&L for earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised iron strip 25×4mm connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth wire and 40mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I complete all as specified and as directed by Engr-in-Charge. Note: (i) Cost of earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning & filling, PCC chamber pit, RCC cover & test point.(iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit.(iv) If the desired earth resistance is not achieved during testing as per IS , the complete earthing shall be replaced / repaired by the contractor at his own cost and no extra claim shall be admissible. (vi) Earth test report shall be submitted to Accepting Officer for the payment of RAR / FB
Supply and Fix in repairs single phase KWH meter 4 wire with LED Display, LED meter 10-60 Amp with Box including taking down of old unserviceable KWH meter complete all as specified and as directed by Engr-in-Charge Note : Old meter shall be deposited to E/ M Store yard.
S&F in repairs energy efficient ceiling fan 1200mm sweep, BLDC (Brushless Direct Current) motor, single phase 230/240v with necessary fittings and connections including 5KV SPD (Surge protection device) complete all as specified and as directed by Engr-in-Charge Make : Havells Model No : Effeciencia Prime Note: Old unserviceable ceiling fan shall be deposited to AGE E/ M-I Store yard.
Supply & fix in repairs exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and as directed by Engr-in-Charge Note :- old unservicable exhaust fan shall be deposited in AGE E/M-I store yard.
M&L for cutting of hole through cement mortar brick wall including providing, fixing and removing shoring,cleaning,internal plastering and removing surplus hard core,rubbish not exceeding 50 mtrs including fixing of exhaust fan of size 250-450 mm all as specified and as directed.
Taking down existing storage type geyser of capacity 25 liter and keeping in safe custody till the completion of repair work and for refixing the same after painting the surface with one coat of synthetic enamel paint including writing MES No complete all as specified and as directed by Engr-in-Charge.
Taking down existing ceiling fan and keeping in safe custody till the completion of repair work and for refixing the same after painting the surface with one coat of synthetic enamel paint including writing MES No complete all as specified and as directed by Engr-in-Charge.
S&F Power contactor 4 Pole 415 Volts of capacity 100 Amp complete all as specified and as directed by Engr-in-Charge.
S&F of Single pole and neutral enclosure supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with and including MCB Single pole 32 Amps 10KA breaking capacity complete all as specified and as directed by Engr-in-Charge.
Supply, laying and testing 10 Sqmm 4.0 Core PVC Insulated XLPE cable ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor confirming IS 7098:1988 Part-I complete all as specified and as directed by Engr-in-Charge.
S&F GI pipe of medium grade 40 mm dia ISI marked including all fitting such as elbow,tee,bend etc fixed on wall and laid on road crossing etc. complete all as specified and as directed by Engineer-in-Charge
Excavation in trenches on soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation, pipe, laying of cable etc not exc 10 Sqmtr on plan and not exc 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-Charge
Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as specified and as directed by Engineer-in -charge.
Removing excavated materials (soil) to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meters above the starting point all as specified and as directed by Engineer-in -charge.
M&L for road cutting, removing of material , returning filling with Plain ceement concrete 1:2:4 Nominal mix for laying of LT UG cable /Galvanised Iron Pipe/Rex Pipe all as specified and as directed by Engineer-in -charge.
V CHINNA DURAI
N Rathinam
M/s Shiva Engineering
M/s J. M. Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .