REPAIR TO PLUMBING SANITARY FITTING SWR PIPES CHAJJA FLOORING MASONARY JOINERY ELECTRICAL FITTINGS FIXTURES AND PERIODICAL SERVICE WELCOME MAINT OF MD OFFRS QTRS AT QSS HILL VIEW AND MAP QTRS AT GMS

Amount

Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

Refixing of shutter of any description not exc 1.00 Sqm each in same opening complete all as specified and directed.

Refixing of shutter of any description exc1.00 Sqm but not exc 2.00 Sqm each in same opening complete all as specified and directed.

S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed

S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed

M&L Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L Second class hard wood 35 mm thick factory made plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

M&L Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

M&L Second class hard wood 30 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 125 mm long complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 75 mm long complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type anodised of 100 mm size complete all as specified and directed.

S&F in repairs aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F in repairs Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

S&F in repairs Butt hinges, medium weight, cold rolled mild steel 75 mm long complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250 mm length of bolt complete all as specified and directed.

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

Cutting holes in brick walls exc half brick but not exc one brick built in cement mortor or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

M&L for running welding in repairs ,thickness of metal to be welded not exceeding 6 mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F figured glass 3 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed

S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down cupboard door of any description in any position

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 30 mm complete all as specified and directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in sections wrought surfaces sectional area exc 3 sqcm and not exc 6 sqcm secured with nails or brads complete all as specified and directed

S & F magnetic catcher catcher with nut and screw of mild steel bright finish complete all as specified and directed

S & F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish, complete all as specified and directed.

S & F in repairs 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish, complete all as specified and directed.

S&F 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down existing pelmet box of any description in any position complete with all fittings all as specified and directed

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.

S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed.

M&L Particle board 12 mm thick, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws in pelmet boxes or in narrow widths n exc 15cm each rebated or flat edged complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L coloured vitrified tiles 10 mm thick (square/rectangular)polish area of each tiles n exc 0.36 Sqm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor incl 20 mm thick screed bed in CM 1:4 complete all as specified and directed

M & L coloured vitrified tiles 10 mm thick (square/rectangular)polish area of each tiles n exc 0.36 Sqm coloured cut to required size set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles but in verticle surface incl 10 mm thick screed bed in CM 1:3 complete all as specified and directed

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and smooth (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for granite of any type tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing incl 15 mm thick screed bed or bedding layer with CM (1:4) complete all as specified and directed.

M&L for granite of any type tiles 20 mm thick machine cut in skirting / dado laid over cement screed, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M & L for two coats of cement based paint on new plastered surface of walls including preparation of surface complete all as specified and directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 50 mm thick in floor finished even and fair for bedding of tiles including necessary form work complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cm x 20 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 20 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.

S&F door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

S&F in repairs door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm complete all as specified and directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete aal as specified and directed..

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings laid in trenches of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings laid in trenches of 20 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tape and refixing the same after repair and replacement of washer 15 mm bore size complete all as specified and directed.Note: spindle where required will be measured and paid separately

Supply only brass spindle short body of 15 mm bore complete all as specified and directed

Supply only brass spindle long body of 15 mm bore complete all as specified and directed

S&F in repairs bib taps cast copper alloy with crutch or butterfly handle fancy type, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia of pipe complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality complete all as specified and directed.

S & F in repair Brass chromium plated Basin mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality complete all as specified and directed.

S&F in repair Chromoium plated angle cock, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, 15 mm bore complete all as specified and directed.

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium platedscrewed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated fancy type screwed both ends for iron pipe or for unions for 15 mm bore of pipe complete all as specified and directed.

S&F in repairs for 15mm bore of pipe pillar taps cast copper alloy, with capstan head chromium plated screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair brass chromium plated bottle traps for Wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed as per approved quality complete all as per specified and directed.

S&F in repair PVC waste pipe for urinal/WHB etc complete all as specified and directed.

S&F in repairs 32 mm bore dia waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed

S&F in repairs Chromium plated grating doom 100 m dia fixed in floor in CM 1:3 complete all as specified and directed

S & F in repair CP Jet spray/Health faucet for 15 mm bore of approved quality complete all as specified and directed.

S & F in repair Toilet Paper holder chromium plated fixed to wall complete all as specified and directed.Cat CAN 1151 N make Jaguar

M&L for vitreous china wash basin, white,flat back, size 550 x 400 mm with brackets, including supply & fixing pillar cock 15 mm bore CP fancy type, PVC connection of 450 mm long, PVC (HDPE) 32 mm bore waste pipe, brass couplings 32 mm CP etc complete all as specified and directed.

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S& F in repair 1 mm thick stainless steel plate rack of size 900X600X200 incl fixing with rawal plug and screws complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S&F brass chromium plated shower rose125 mm size with or without swivel joint complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F PVC 10 litres capacity valveless ,syphonic action type low level flushing cistern ,white including flush pipe, cantilever brackets ,inlet, ball valve, float and handle, PVC connection 15mm dia etc complete all as specified and directed.

S & F in repairs internal fitting (syphon) for low level flushing cistern complete all as specified and directed.

S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

S & F in repair Europian WC floor mounted cascade pattern vitreous china with dual core flushing cistern incl all fitting flush pipe etc make Hindware cat 92048 (starwhite) or equivalent of specified make complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed

S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top)1000 litre capacity hoisted and fixed in position complete all as specified and directed

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S & F in repair chromium plated towel ring with bracket complete all as specified and directed.Cat AQN -7721 Make JAGUAR

S & F in repair brass mortice lock size 75 mm 2 lever complete all as specified and directed

S & F in repair Brass mortice Lock size 100 mm 4 lever with two keys complete all as specified and directed.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore dia of pipe complete all as specified and directed.

Demolition of existing sunken water proofing treatment/cement plaster/cement concrete any descripltion and removing the debris from site n exc 150 m from site complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for filling polymer modified non shrinking slurry for sunken floors for toilets by drilling holes 60mm by 20mm dia at 1 mtr interval and applying slurry all as per technical specification

M&L for epoxy treatment to sunken floors and testing the same after 48 hours with complete filling with in the sunken floor complete all as specified and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate as in sub base (wearing course) complete all as specified and directed.

M & L for rendering 10 mm thick CM 1:3 surface as in roof with 3% integral water proofing compound by the weight of cement complete all as specified and directed. (Note : WPC will be paid separately)

Supply only liquid Water proofing compund

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick incl aluminium grill and 4 mm thick tinted glass incl beading and necessary rubber packing ,locking arrangement opening arrangement in all fitting and fixture complete all as specified and directed.

S&F in repair cabinet mirror in bathroom all as specified and directed

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S & F in repair mild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete

S & F Magic Eyes for doors complete

S&F Stop cock single lever 3 inlet diverter exposed parts kits consisting of operating lever wall flange Model OPP-15193 KPM make Jaguar

S & F wall mounted wash basin Cat CNS WHT 807 size 600 X 500X215 mm complete.

S&F Towel Rack 600 mm long without lower Hangers but with 3 hooks Cat CAN-1181 FHN make Jaguar

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook Cat ALD-565 make Jaguar

S & F repair Over head Shower 100 mm round shape single flow (ABS body chrome plated with gray face plate ) with rubit cleaning system Model OHS 1989 Make Jaquar

S & F Chromium plated Pillar tap for wash basin cat 81001 make Jaguar

M&L in repairs for Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement etc complete all as sapecified and directed.

S & F Urinal partion wall mounted of white colour size 310 X 700 mm Complete as specified and directed.

M&L for preparation of old decorated surfaces of walls and apply one coat of white wash complete all as specified and directed

M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge.

M & L for one coat of cement based paint on old plastered surface of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall with complete removal of existing treatment and applying two coat of cement based paint complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of anti fungal weather coatpaint on walls complete all as directed by Engineer-in-Charge

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified and as directed by Engineer-in-Charge.

Taking down PVC/Cast Iron/RCC drain water pipe of any size or pattern including all fitting head, shoe, band, swan neck etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed.

S&F in repairs stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed.

S&F in repairs stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed.

M&L for taking down carefully old UNSV aluminium point wiring with wooden batten and all accessories of(light, fan, socket or power) such as switches socket ceiling rose, fan regulators, light fitting, main switches DB’s etc and making good disturb surface all as specified and directed.

M&L for point wiring with cable PVC insulated but unsheathed, 1.5 Sqmm, stranded copper conductor in and including PVC conduit duly concealed continuous earthing with cable PVC insulated 1.5 Sq mm copper conductor, MS box including laminated top sheet cover,washer & screw all as specified and directed for One light point controlled by one, one way switch.

All as per itme No 171 but for One fan point controlled by one, one way switch.

All as per itme No 171 but for One exhaust fan point controlled by one, one way switch.

All as per itme No 171 but for One 5 Amp socket point controlled by one switch on independent board

All as per itme No 171 but for One 5 Amp socket point controlled by one switch on same board

One light point controlled by two 2 - w a y s w i t c h e s , with cables 1.5 sq. mm

All as per item No 171 above but with cable PVC insulated 4.0 Sq mm (FR) in and including PVC Conduit incl continuous earthing with cable PVC insulated 2.5 Sq mm copper conductor for power socket 15Amps (Make : Anchor/ Standard/ Finolex/Havells/HPL)

S&F switch socket combination 2-in-1, 5 pin 5 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S&F switch socket outlet 5 pin 5 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S&F switch socket combination 2-in-1, 5 pin 5 and 15 Amp (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F switch piano (Flush type) 5 amps, 240 Volts, single pole one way.

S & F switch piano (Flush type) 5 amps, 240 Volts, single pole two way.

Supply and fix modular socket 6A , 2/3 pin combined 2 module complete all as specified and directed Make :- ABB / Crabtree / Cona

Supply and fix modular switch6A complete all as specified and directed Make :- ABB / Crabtree / Cona

Supply and fix modular switch 1 way 16A, 1 module complete all as specified and directed Make :- ABB / Crabtree / Cona

Supply and fix modular socket 6A / 16A , 2/3 pin combined 2 module complete all as specified and directed Make :- ABB / Crabtree / Cona

Supply and fix modular 6A 1 module 2 way switch complete all as specified and directed Make :- ABB / Crabtree / Cona

Supply and fix modular Ceiling rose 3 termianl complete all as specified and directed Make :- ABB / Crabtree / Cona

S&F modular white cover plate with frame for module 3 incl modular metal flush box complete all as specified and as directed

All as per itme No 189 above but for 6 module complete all as specifed and as directed

All as per itme No 189 above but for 8module complete all as specifed and as directed

All as per itme No 189 above but for 12 module complete all as specifed and as directed

All as per itme No 189 above but for 18 module complete all as specifed and as directed

S&F ceiling rose, bakelite three terminal complete all as specified and as directed

S & F bell ding dong electric single phase 240 Volt. Make : .(Cable make Anchor/Havells / Finolex/RR Kabel)

S & F ceiling fan regulator electronic step type socket mounting type. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size (Note : Contractor shall submit warratny for 03 yrs)

S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)

S & F lamp holder PVC insulated body suitable for batten fitting straight/angle modular type with LED reterofit bulb 9 watts cap complete all as specified and as directed Make-Anchor/leader/SSK and bulbs C&S, Havells, Crompton

Supply and fix in replacement of bldg security light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contructors shall submit for warrenty of 3 yrs to 5 yrs)

M&L for replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor complete all as specified and directed.(Cable make Anchor/ Havells /Finolex)

M&L of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC conduit with conceiled wiring continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor complete all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

M&L of 2 Runs of cable PVC insulated but unsheathed 10 Sq mm, stranded copper conductor in and including PVC conduit with conceiled wiring continuous earthing cable PVC insulated 6.0 Sq mm, stranded copper conductor complete all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

S & Fix in replacement sheet metal enclosure vertical DBs with provision for FP MCCB frame upto 100A in 16,KA, 25KA, as incomer 4 way double door made complete all as specified and directed Make Standard/ Indo asian/ Havells/Anchor

S & Fix sheet metal enclosure double door MCB DB, SPN 8way complete all as specified and directed

S & Fix MCCB 100 Amps 4 Pole 25 KA 415Volts complete all as specified and directed (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & Fix MCCB 63 Amps 4 Pole 16 KA 415Volts complete all as specified and directed (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & Fix TPN 40 Amps 415Volts complete all as specified and directed(Make : Anchor/ Standard/ C&S/Havells/HPL)

S & Fix MCB SPN 16 TO 32 Amp 10 KA 240 Volts complete all as specified and directed(Make : Anchor/ Standard/ C&S/Havells/HPL)

S & Fix MCB, SP 6 to 30 Amp 240 Volts rating complete all as specified and directed (Make : Anchor/ Standard/ C&S/Havells/HPL)

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed

S & F in minor repairs to FTL fittings by replacing bi-pin holders, connections , tube rods of any type and capacity etc complete all as specified and as dired (Note : Tube rods shall be issued under Sch B stores from MES Stores)

S & Fix PVC conduit pipe 20mm dia complete alongwith necessary fixing arrangement complete all as specified & directed

S & Fix PVC casing capping 25mm complete alongwith necessary fixing arrangement complete all as specified & directed

Supply and fixed in replacement of 3 pin 15 Amps plug top complete all as specified and directed Make Anchor/SSK/Indo Asian

S& Fix in replacement of Electronic Ballast suitable for 36/40 watts FTL conventional light fittings complete all as specified and directed (Make Anchor, havells, Bajaj, CG, C&S)

S& Fix in replacement of Electronic Ballast suitable for 28 watts FTL conventional light fittings complete all as specified and as directed (Make Anchor, havells, Bajaj, CG, C&S)

S&F in replcment of single pole and neutral enclosure with a two pin and earth plug socket 240 V with one MCB SP ‘C’ series rating 20 to 30 Amp complete all as specified and directed. Make: L&T/standard/CG/ C&S / Havells

M&L, for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning all as specified and directed..

c p engineering works

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

M/S JAGANNATH SASMAL

M/S. KISHAN ENGINEERING

M/S S.K GHOSE