Loading
Loading…
Loading…
Tender Value
₹12.7 Cr
EMD Value
₹25.5 L
Closing Date
20 May 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (RSP)
Above/Below/Par
C AND W
14 conditions · 3 needing a document upload
10.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where, V=Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VI(B), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Authority: Indian Railways Standard General Conditions of Contract, April-2022 (Advance Correction Slip No. 1) issued vide Railway Board's letter No 2022/CE-I/CT/GCC-2022/Policy, Dated 14.07.2022).
10.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formulae detailed as Annexure-VI. (Authority: Indian Railways Standard General Conditions of Contract, April-2022(Advance Correction Slip No. 11) issued vide Railway Bd's letter no.2022|CE- UCTIGCC-2022[POLICY/Pt.I (E-3320424) New Delhi, Dated 13.03.2026) Note: All other terms and conditions related to Qualifying/ Eligibility Criteria will be governed by Indian Railway Standard General Conditions of Contract (April,2022) as amended/ corrected up to latest correction slips up to the date.
10.1 Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or ii.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or iii.One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: i.Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or ii.Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or iii.One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b (1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. b (2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. b (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. Similar Nature of work means: "Manufacture/ Rebuilding/ Rehabilitation/ Renewal/ Repair of Wagons/ Coach/ Locomotives." Note: As approved by PCME/ER vide letter no.MRW/WC/Similar Nature of Work/II, dtd.22.11.2022) Note: Other terms regarding technical eligibility criteria shall be governed by Indian Railway Standard General Conditions of Contract (April' 2022) as amended/ corrected up to latest correction slips up to the date. .
11 conditions · 2 needing a document upload
A. Documents to be uploaded only in the website by the Tenderer Following Annexures duly filled and signed are to be uploaded online only prior to Closing of Tender. Original copy of all the documents to be submitted to office within 7 days whenever demanded by the Railway. Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's. Annexures are available at Upload/View Document menu in Home Page of IREPS portal for works tender. 1. The details of the works completed by the tenderer during the last three years to be filled in Annexure-I. 2. The details of Plants and Machinery with the tenderer to be filled in Annexure- II. 3. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 4. Details of Works presently on hand of the Tenderer to be filled in Annexure- IV. 5. The details regarding Association of Railway Officer s with the tenderer to be filled in Annexure- V. 6. List of the Arbitration cases of the Tenderer during last Five years to be filled in Annexure-VI. 7. List of the Court cases of the Tenderer during last Five years to be filled in Annexure- VII. 8. NEFT MANDATE FORM. All Payments to the agency including the refund of the Earnest Money of the unsuccessful bidder preferably will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII.
B . Documents to be uploaded in the website as well as submitted in tender boxes by the Tenderer If online payments have been made no documents are to be deposited. Following Documents are to be uploaded in the website as well as submitted in the appropriate tender boxes prior to Closing of Tender where online payment has not been made by the tenderer. Incase of non-receipt of these documents, the offer will be summarily rejected. 1 . Details of Cost of Tender Document and Earnest Money Deposit. Original copies of money Receipt or Instrument towards cost of purchase of Tender Document and Earnest Money Deposit are to be submitted in the appropriate tender boxes prior to closing of tenders specified in the NIT and the website.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.Otherwise, Railway reserves rights to Reject/Accept such tender/offer without any reference to the tenderer/tenderer's.
Annexure:- IV, V , VI and VII
"Rehabilitation of BOBR/BOBRN wagons"
MC-40-C-BOBRN-REHAB-26
MC-40-C-BOBRN-REHAB-26
Open
Works - General
24 Months
Paschim Bardhaman, West Bengal
₹0
₹25.5 L
20 May 2026
27 Apr 2026
6 May 2026
63 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 12,72,90,423.32 | ||
| — | 500.00 | — | — | ||
| Panel Patching (replacement) of One square meter End Slope Plate, RDSO Drg. No. WD- 91071-S-60 item-1,15Panel Patching (replacement) of One square meter End Slope Plate, RDSO Drg. No. WD- 91071-S-60 item-1,15(including GST) | — | — | — | 32,51,390 | |
| — | 40.00 | — | — | ||
| Panel Patching (Replacement) of One full End Slope Plate, RDSO Drg. No. WD-91071- S-60 items-1,15(Including GST) | — | — | — | 36,57,214.4 | |
| — | 370.00 | — | — | ||
| Replacement of Longitudinal ridge with ribs length2198mm, RDSO Drg. WD-91071-S- 64 item 1(including GST) | — | — | — | 53,72,333.4 | |
| — | 762.00 | — | — | ||
| Replacement of Cross ridge (complete) length 980mm, RDSO Drg No. WD-91071-S- 55 item 4(including GST) | — | — | — | 53,70,606.48 | |
| — | 250.00 | — | — | ||
| Replacement of Two Side Sill Hopper Plate with Frame, RDSO Drg. No. Wd-91071-S- 63, item 1,2(including GST) | — | — | — | 22,60,102.5 | |
| — | 500.00 | — | — | ||
| Replacement One Centre Sill Hopper Plate with frame, RDSO Drg. No.WD-91071-S- 64item 2,3(including GST) | — | — | — | 54,50,850 | |
| — | 1600.00 | — | — | ||
| Replacement of One Door Flap with modified forged hinge, RDSO Drg. Wd-91071-S- 66 items 1,9(including GST) | — | — | — | 3,35,74,208 | |
| — | 5.00 | — | — | ||
| Replacement of one Nos. Door Hold Pressing, RDSO Drg. No. WD-91071-S-65 items 6,7,8,9,10(including GST) | — | — | — | 59,818.4 | |
| — | 500.00 | — | — | ||
| Replacement of One Cross Ridge Stay, RDSO Drg. No. Wd 91071-S-58 item 4(including GST) | — | — | — | 60,59,830 | |
| — | 6000.00 | — | — | ||
| Panel Patches (replacement) of One Square meter of Side Body, RDSO Drg. No. WD- 91071-S-59 item 1(including GST) | — | — | — | 2,63,41,980 | |
| — | 2.00 | — | — | ||
| Replacement of One Side Wall assembly, RDSO Drg. No. WD-91071-S-59 items1-8, 10-11(including GST) | — | — | — | 3,03,962.34 | |
| — | 450.00 | — | — | ||
| Replacement of One Side Coping Top length 9671mm provided with 6mm thick plate protection, RDSO Drg. No. WD-91071-S-59item 7(including GST) | — | — | — | 68,56,033.5 | |
| — | 150.00 | — | — | ||
| Replacement of One Side Stanchion, RDSO Drg. No. WD-91071-S-59 item 3A(including GST) | — | — | — | 8,13,981 | |
| — | 250.00 Per | Wagon | — | ||
| Fitment and setting of door mechanism in BOBRN wagon(including GST) | — | — | — | 20,13,512.5 | |
| — | 50.00 | — | — | ||
| Repair of defective/damaged and testing of Door Link mechanism arrangement (Double Link),RDSO Drg. No. WD-96038-S-1and 2: Lever X end, Y- end & Central(02 Nos. each), connecting Link small & large (04Nos. each), Eye Bolt with Spring Washer, Nut &Lock(08 Sets), Adjustable Lever (03 Nos.), Nut Lock(08 Nos.), Eye Bolt(01 No.), Bearing near and far end(04 Nso. Each) and Misc. items like Pins, Cotters etc.(including GST) | — | — | — | 17,38,738.5 | |
| — | 100.00 | — | — | ||
| Replacement of Supporting Angle for End Body Length 1000mm, RDSO Drg. No. WD- 91071-S-62 items 1,3,4,5,18(including GST) | — | — | — | 1,10,315 | |
| — | 300.00 Per | Wagon | — | ||
| Full Painting (Two coats) as per G-72 maintenance manual (latest version) & RDSO Drg No. WD-91071-S-50 Stencilling: RDSO Drg. No. Wd-91071-S-81(including GST) | — | — | — | 59,94,792 | |
| — | 4500.00 | — | — | ||
| Misc. Welding (Including consumables)(including GST | — | — | — | 8,63,370 | |
| — | 20.00 | — | — | ||
| Air Cylinder (80 lit), Drg no WD-92081-S-52, Item-21(including GST) | — | — | — | 1,48,400 | |
| — | 20.00 | — | — | ||
| Bracket for cylinder, Drg no WD-92081-S-52, Item-22(including GST) | — | — | — | 61,280 | |
| — | 100.00 | — | — | ||
| Replacement of items for LSD fitment arrangement, RDSO drg. WD-01065-S-02 items 2,3,4 and Wire braded Hose ½" x 760mm (2 nos.), Misc. items like pins, cotters etc(including GST) | — | — | — | 5,36,800 | |
| — | 10.00 | — | — | ||
| Replacement of Turn Buckle to RDSO Drg No. WD- 92081 S-57 ,ALT-10, IT-9(including GST | — | — | — | 14,790.8 | |
| — | 500.00 | — | — | ||
| Replacement of Bush (Bronze) to RDSO DRG NO. WD-92081-S-57. IT-5, ALT- 10(including GST) | — | — | — | 19,16,065 | |
| — | 150.00 | — | — | ||
| Replacement of Door Clip (left & right) RDSO DRG NO WD-96038-S-03,ALT-4,IT- 9(including GST | — | — | — | 3,31,917 | |
| — | 100.00 | — | — | ||
| Operating Shaft with mechanical stop Drg no WD-96038-S-02, item no 22(including GST) | — | — | — | 2,58,000 | |
| — | 2250.00 | — | — | ||
| Supply & Replacement of Side Slope Plate (6mm), 810 mm, Drg no WD-91071-S-59, Alt 6, Item-8(including GST) | — | — | — | 52,59,892.5 | |
| — | 1000.00 | — | — | ||
| Supply & Replacement of Cross Brace for Hinge (Cross ridge end), Drg no WD-91071- S-55, Alt 5, Item-3(including GST) | — | — | — | 21,75,380 | |
| — | 1000.00 | — | — | ||
| Supply & Replacement of Cross Brace for Hinge (End Slope Plate end), Drg no WD- 91071-S-55, Alt 5, Item-2(including GST) | — | — | — | 19,71,460 | |
| — | 4000.00 | — | — | ||
| Supply & Replacement of Lug for Door Hinge (End Slope Plate) 25mm Thk, Drg no WD-91071-S-65, Alt-5 & WD-91071-S-66, Alt-9, Item-11(including GST) | — | — | — | 22,63,480 | |
| — | 4000.00 | — | — | ||
| Supply & Replacement of Lug for Door Hinge (Cross Ridge Plate) 25mm Thk, Drg no WD-91071-S-65, Alt-5 & WD-91071-S-66, Alt-9, Item-3(including GST) | — | — | — | 17,28,960 | |
| — | 4000.00 | — | — | ||
| Supply & Replacement of Pin with washer and split pin, Drg no WD-91071-S-65, Alt-5 & WD-91071-S-66, Alt-9, Item-4(including GST) | — | — | — | 5,30,960 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
GCCACS111.pdf
ATTACHMENT
RAILWAYBOARDLETTERFORWELDERQUALIFICATION.pdf
ATTACHMENT
TENDERDOCUMENTBOBRN-300REV.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .