REPAIR TO CHAJJA, PARAPET, GROUTING, PLASTER AND RELATED BR WORKS TO CERTAIN BLDGS UNDER AGE BR-IV OF GE (SOUTH) MEERUT CANTT

M&L for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Necessary Forwork and reiforcement required at the site will be supplied and fixed by the contractor and the cost of these are deemed to be included in the rates quoted by the contractor and contractor have to inform the department one day in advance after binding the reinforcement otherwise no payment will be considered on this account)

M&L for repairing existing RCC structure work by grouting, gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scaffolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placing position as directed by Engr in-charge.complete all as specified and directed.

M&L for Rendering 15 mm thick rendering on roof surface including flashings and junction of parapets etc, finished even and smooth in cement mortar (1:4), including water proofing compound 200 ML per each cement bag (50 Kg) after brushing cement slurry including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth complete all as specified including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc

M&L for rendering 10 mm thick on brick or concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:4), complete all as specified including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc

M&L for Two coats of cement base paint over a coat of primer white or tinted on new plastered surfaces of walls and applying 1mm thick wall care putty on wall including prepration of surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes complete all as specified and directed.(Note- cement base paint shall be applied through roller and through applicator)

M&L for preparation of newly plastered surface of wall etc and applying 1mm thick wall care putty and two coat of oil bound distemper (OBD) over one coat of primer complete all as specified. (Note- The Oil bound distemper shall be applied through roller and through applicator)

M&L for preparation of newly plastered surface of ceiling etc and applying 1mm thick wall care putty and two coat of white wash) over one coat of primer complete all as specified. (Note- white wash shall be applied through roller and through applicator)

M&L for complete removal of exisitng treatment on old internal wall surfaces by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on all surfaces and then applying two coat of oil bound distemper. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator)

M&L for Preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including Washing, rubbing down and stopping of distempered, painted surfaces on walls all as specified (Note- The Oil bound distemper shall be applied through roller and through applicator)