MAINT/REPAIR OF ROAD BERM ETC IN RESTRICTED AREA AT FARIDKOT MIL STATION

Amount

Repair to pot holes exc 30mm depth, not exe 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg / 10 sqm ,putting in premix bituminous macadam with coarse aggregate of grading 3 (50 to 20mm size) for 7.5 cm thick and sealed with binder 9.8 Kg per ten Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size mixed with 5.5% by weight of total of mix of paving bitumen binder content (VG-30), rolled and compacted with 8 to 10 tonne power roller (including supply of premixed macadam, binder and chippings ) complete all as specified and directed by Engr-in-charge.

M&L Preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with paving bituminious primer (VG-10) @5 kg per 10 Sqm metres and applying Bituminious, premixed asphaltic semi dense concrete, 30 mm consolidated thickness with 5.5 % of paving bitumen binder content (VG-30) by weight of total mix , rolled and compacted to required camber and gradient with 8 to 12 tonne power roller to achieve uniform/ smooth surface, complete all as specified and directed by Engr-in-charge.

Scarifying or picking gravelled macadam or bituminous macadam surface power or by hand picking to a depth exceeding 50 mm and not exceeding 100 mm and area not exceeding 400 Sqm in one stretch including racking over and grading the broken up surfaces to the proper camber etc. as required complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick (compacted thickness) WBM, with coarse aggregate (using granite, trap or basalt) of grading 2(63 to 40mm size) spread, rolled and consolidated to required camber and gradient using 8 to 12 tonne power roller, complete all as specified and directed by Engr-in-charge.

Preparing water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweepig with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat with paving bitumeneous primer VG-10 grade @ 10 Kg per Ten Sqm on water bound macadum surface complete all as specified and directed by Engr-in-charge.

M & L for bituminous macadum with hot mix plant using crushed stone aggregate of specified grading premixed with bituminous binder VG-30 grade @ 4% by weight of total mix transporting the hot mix to work site spreading and laying with a hydrostatic mechanical paver and roller to required camber /gradient rolled and compected to smooth uniform surface with vibratory and tandum 8 to 10 tonne roller (consolidated thickness 75mm or less) complete all as specified and directed by Engr-in-charge.

M & L for painting lines, dashes, arrows, letters etc on road / pavement and like using thermoplastic road marking (White/Yellow) paint with 8% glass beads using special applicator machine with heating arrangement up to 160 Centigrade complete All as specified and directed by Engineer-in-Charge. Make:- Shivalic, Kothari, Jyanti, Swastic.

Demolition of Concrete (un-reinforced) in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

M & L for 100mm thick plain cement concrete (1:4:8), type D-2 (Nominal Mix) using 40 mm graded stone aggregates as ins sub base, complete all as specified and directed by Engr-in-charge.

M&L for 25mm thick sand filling under floors, including watering and consolidation as required complete all as specified and directed by Engr-in-charge.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floor, skirtings etc complete all as specified and directed by Engr-in-charge.

M&L for 80mm thick, M-40 grade machine pressed pre-cast concrete interlocking paver block with gray cement and pigment (Colour Tiles)any shape & size conforming to IS 15658 - 2006 laying over sand cushioning surface etc complete all as specified and directed by Engr-in-charge. Note: Sand cushioning will be measured and paid for separately under respective item of BoQ.

Laying only 80mm thick machine pressed pre-cast concrete interlocking paver block of any shape & size laying over sand cushioning surface etc complete all as specified and directed by Engr-in-charge. Note: (i) Sand cushioning will be measured and paid for separately under respective item of BoQ. (ii) Paver block retrived from item No 11 here-in-before shall be used.

M&L cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in benching for manholes, bands, coping, bed plates including slightly rounded or chamfered angles including necessary formwork as in side of breakers etc complete all as specified and directed by Engineer in Charge

M & L for factory made pre-cast cement concrete (1:2:4) type B1, using 20mm graded crushed stone aggregate as in kerb stone of approximate any size as directed by Engineer-in-Charge including necessary form work with plain fair faces, including chamfers, weatherings, throating etc set in cement mortar (1:4) with joints to match for path edging etc; embedded in position including all necessary excavation, tamping ground around blocks and removal of rubbish/ surplus soil etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new painted concrete/bricks surface of any description over 10cm girth or width, not otherwise described and applying two coats of weather proof paint complete all as specified and directed by Engr-in-charge.

Supplying and fixing in replacement of MS round delineator 50 mm dia and 700 mm long having 2 No 100mm dia highly reflective reflector made of PMMA and mounted on MS pipe of 50mm dia duly powder coated, anti rust and anti theft steel net available in Red/White or Yellow and embedding the same in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, complete all as specified & directed by Engineer-in- charge. Note : - Size of PCC block for embedding delineator shall be 10cmx10cmx15cm and cost of the same is deemed to be included in the unit rate of this item.

Supply and fixing in replacement of Solar stud 125mm x 125mm x 25mm made from aluminium alloy and construction powered by mono crystal solar panel with high capacity Ni-Cd rechargable battery having view distance 1000 meters LEDs-010mm, 6 pieces for high brightness, 12 hours of continuous lighting at night and can bear upto 25 Ton load complete all as specified and directed by Engineer - in - Charge.

S&F in replacement of cat eye of dimension 8.10X11.56X1.7cm, plastic body having two ways reflector with resistant lens including fixing arrangement as per manufacturers instructions complete all as specified and directed by Engr-in-charge.

S&F in replacement of solar delinator with 6 LEDs of red / yellow colour house in plastic body with LEDs , solar cells, battery and light sensors well protected in poly carbonate sheet, device pretected with powder coated wire mesh cage, equiped with solar sysytem mounted over 50 mm dia steel tube post powder coated coated length 1000mm also having sheet foot to firm grip in the ground. the delinator to have additional reflective bands , equiped with solar system workable for 2-3 days (night) after full charge of 8-10 hours including excavation in any strata and embedding in PCC 1:3:6 type C1 of size 30cmX30cmX20cm etc including aluminium alloy polycorbonateed powder coated MS pipe of size 50 mm dia and 1000mm hight complete all as specified and directed by Engr-in-charge.

Supplying and fixing in replacement of 800 mm dia convex mirror complete as per manufacturer instruction including excavation, PCC etc complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided

Supply and fix in repairs customized signage board , hard sheet ACP 3mm, base reflective sheet (Green and white) - Engineering Grade, lettering-Vnyl of size etc complete all as specified and as derected by Engineer-in-Charge.

S&F MS steel frame work as in post including cutting tors to shape as directed, drilling holes, etc. including all necessary drilling, bolting or riveting, etc. and similar work confirming to Fe-290 Gde E-165.

M&L for preparation new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic paint over one coat of red oxide primer complete all as directed

M & L for Excavation in post holes (Or similar holes) each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceending 25 cm in hard/dense soil.

M & L for cement concrete type B2 , 1:2:4 ,using 40 mm graded stone aggregate in foundation filling and mass complete all as specified and directed by Engr-In-Charge ---------------------------------------------------------------------------------------------- Note:- A sum of Rs. 74550.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 20 (Schedule of Credit) of Tender document

NEW AMRITSAR CONSTRUCTION COMPANY