SPECIAL REPAIR/ IMPROVEMENT OF CERTAIN SMQS IN DOMESTIC AREA AT AF STATION BKT.

Amount

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L 15mm thick rendering on other than fair faces of brick work or stone masonry Surface in CM 1:6. and finished even and smooth without using extra cement mortar complete all as specified and directed

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & chajja/roof/ceiling mixed, facia at any height with liquid water proofing compound as per manufacturer's instruction's surface finished even and smooth without using extra cement.(WPC shall be measured and paid seperat)complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface complete all as specified and directed .

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces chajja & facia at any height finish smooth and without using extra cement cmplete all as specified and directed

Supply only integral water proofing compound, ISI Marked. Complete all as specified and dircted.

M&L for preparing new untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed

M&L for preparation of old painted surface of wood or wood based material of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enemel paint complete all as specified

M&L for preparing new steel or iron surfaces of any description, exc 10cm in width or girth and two coats of synthetic enamel Paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation and applying two coats of oil emulsion distemper over and including one coat of wall care putty 1mm thick, on new plastered surfaces of walls complete all as specified and directed

M&L for preparation and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ,complete all as specified .

M&L for complete removal of existing treatment preparation and and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) ,complete all as specified .

M & L preparation and applying two coat of white wash on new plastered surface of ceiling. complete all as specified and directed

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coats of oil bound distemper over and including one coat of birla white wall care putty 1mm thick complete all as specified and directed.

Preparing old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coats of white wash complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L glazed ceramic joint free coloured tiles of size 450x300x7mm / 600x300x7mm thick, in vertical surfaces , set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed

M & L coloured non-skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed

M&L for non skid ceramic (coloured) jointless tiles (square or rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm and 7-8 mm thick, as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed in CM 1:6 over and 25 mm thick sub base of floor in PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) complete all as specified and directed.

All as per item No-20 above but on wall surfaces over and including 10mm thick in CM 1:4 complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S & F for pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., steel ventilator with top hung shutter including hinges, steel peg stay including filling cement concrete 1:3:6 type B-1 (using 20 mm graded stone aggregate) filling and compaction in frame complete all as specified and directed.

S & F for pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. , steel ventilator with top hung shutter including hinges, steel peg stay hold fast (of FI 40x3mm) etc. complete all as specified & directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type on both sides complete.all as specified and directed.

M&L for factory made, second class hardwood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; and fitted to chowkats complete all as specified and directed

S&F providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories area not exceeding 2.00 sqm each complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F for sheet glass 5.50 mm thick, glass, fixed in uPVC windiw including all fitting and fixturres complete all as specified and directed

M&L for mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.

S&F for Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specifed and directed.

M&L for 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed complete all as specified and directed.

S&F Aluminium handles cast type anodised of 150mm complete all as spcecified and directed.

S & F for 100 mm size butt hinges, medium weight cold rolled mild steel, and fixed complete all as specified and directed.

S & F of factory made Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and shown on drawing. Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life

S & F of Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

M&L butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mm long, type B-21 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for mild steel framed work such as grills, gratings etc with ends of bars, M S pipe shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

S&F for mild steel work as in hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc : flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

S & F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Demolition of reinforced cement concrete of any position and any description not otherwise specifically provided (if reinforced cement concrete ) complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded crushed stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

M&L 18 to 20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambr, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F in repair sinks with drainage board made of stainless steel 1 mm thick with plugs, washer, wastes , brackets etc, overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs stainless steel kitchen plate rack thickness 2.00 mm wall mounted of overall minimum size (915X455X1220) mm deep, with partition for small/large plates etc made out of stainless steel grade 304, fixed with rawl plug and cp steel screws all as specified and directed complete all as specified and directed.

S & F in repair Vitreous china wash squatting pattern closet 'Orissa pattern' white, size 580 x 440mm with S or P trap, integral foot rests, with and including PVC low flushing cistern 10 litre capacity white with all fittings, fixtures including brackets and 32mm bore PVC flush pipe complete all as specified and directed.

S & F vitreous China wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and pvc wast pipe including cutting for and pinning in ends of bracket fixed in repairs complete all as specified and directed.

S & F Soap dish, vitreous China white, ap?proximate size 160x 160x90mm complete all as specified and directed.

S & F in repair of CP bib tap long shank pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore complete all as specified and directed.

S & F in repair CP pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with long shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed

S & F in repair CP stop cock /angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore complete all as specified and directed.

S&F in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair PVC connections, 450mm long with brass CP / PTMT nuts suitable for connecting 15mm bore pipes, superior quality complete all as specified and directed.

S & F for brass chromium plated shower rose 200-300 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 20 to 25mm bore PVC coated fancy type curtain rod with fixing brackerts, stops, rollers etc incl holder as required complete all as specified and directed.

S & F repair tubular towel rail, brass chromium plated 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed at site complete all as specified and directed

Supply only sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes 75 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S & F in repair for 75 mm bore C I soil waste and vent pipes sand cast, in any length with or without ears with cement jonts fixed to wall complete all as specified and directed.

S & F for 75 mm dia cast iron floor trap, with grating including jointing to waste pipe, fixed in cment concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repairs for CI bends 75 mm ( any radius), diminishing pieces or tapers ( larger bore measured) complete all as specified and directed.

S & F in repairs for 75 mm bore C I branch pieces, single ( equal or unequal), ordinery or inverted( spigot or socket type) or with parallel branches, complete all as specified and directed.

S & F in repairs 75 mm bore C I branch pieces, double (equal or unequal), ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75mm cast iron cowls complete all as specified and directed.

S&F 75 mm bore CI Nahani traps complete all as specified and directed.

S&F 75mm bore CI traps 'P' or 'S' type complete all as specified and directed.

S & F stack clamp made of 50 mm X 5 mm flat iron and 16 mm dia round iron stay including nut bolts and securing ends of stay to wall or roof suitable for 50 mm bore pipe complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concilled in walls and ceiling or laid in floors complete all as speccified and directed

S&F steel water tubes medium grade, galvanised with all fittings 20mm bore fixed complete to walls and ceiling or laid in floors trenches complete all as specified and directed

S & F 500 Litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F in repair 20 mm PTMT float valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and fixed, (minimum weight 210 gms) and flynut complete, screwed for Iron pipe etc all as specified and directed.

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia complete all as specified and directed

M & L for machine cut and mirror polished kota stone slab flooring 16 to 18 mm thick over 20 mm thick cement mortar screed (1:6) base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

All as per item No. 80 above but on vertical surfaces as in riser of steps, skirting, dado and pillar laid over cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polushing complete all as specuified and directed.

S&F for 18mm thick PVC board of one side prelaminated or digital finished and other side plan white colour to make kitchen cabinet shutter/drawer front shutters complete with and including all fittings 3 D hinges as required as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion

S&F for 18mm thick PVC board of one side white or digital finished and other side plan white colour to make kitchen cabinet shutter/drawer front shutters complete with and including all fittings 3 D hinges as required as per specifications complete all as specified and directed. Make : Rajshree/Sintex/sunwin/ M/S Kumar Arch Tech Ltd, M/S H2O soultion

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even, Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base of floor complete all as specified and directed.

S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slury in floors with grey cement and pigment including screed bed 15mm thick in cement mortar 1:6 and pigment complete all as specified and directed.

Surface preparation cleaning, removal of any loose concrete/brick tiles and filling, cracks with polymer modified mortar using smart care SRP/PU sealent making of angle fillets around periphery using polymer modified mortar complete all as specified and directed over supply and apply high performance elastomeric waterproofing coating cold applied of spray/brush appled smartcare Damp proof Ultra Liquid membrane with an elongation of 300-400% crack bridging ability of min 2mm solid content of min 50%. The system includes application of smartcare Damp proof Ultra in three coats at 1.1 Kg per Sqm using brush or roller complete as per manufacturer specifications.

Demolition of brick work or stone/boulder masonary built in cement mortar of any specification and in any position complete all as specified and directed.

M&L for brick work with flyash old size bricks, straight or curved on plan exc. 6mm mean radius, built in in cement mortar 1:6.complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft/loose soil complete all as specified

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified

Removal of excavated soil to a distance not exc 50 meter and depositing where directed at a level bit exc 1.50 M above the starting point complete all as specified

Demolition and breaking up drain pipe 150mm bore salt glazed stone ware /AC/PVC pipe complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) bedding to drain pipes 150mm internal dia of pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed

S & F 150mm bore (internal dia) salt glazed stone ware pipes grade 'A' laid in trenches on concrete bed required slope jointed complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe 150mm internal dia of pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1, smooth finished complete all as specified and directed.

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.

Refixing of serviceable light littings upto 22 watt obtained from item No. 01 including connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified.

Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store and fixing at site on completion of work complete all as specified and directed.

Taking down old and unserviceable sub main wiring any size / type / core incl earth wire complete with batten conduit etc complete all as specified and directed.

Taking down old and unserviceable sheet metal enclousure, switch fuse unit,distribution board any type/way/capacity including fuses MCBs, insulator, RCCBs etc copmlete after removing all connection and making good the disturbed surface complete all as specified and directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete for following-

(a) One light/fan point controlled by one switch SP 5 Amps ,240 V

(b) One 3 pin 5 amps switch socket outlet point on independent board

(c) One 3 pin 5 amps socket point on same board

(d) One bell/buzzer point controlled by bell push

(e) One light point controlled by two 2 way switches.

All as per item No. 103. above but with 2.5 Sqmm (nominal area) PVC insulated unsheathed multistranded 1100 volt grade FRLS copper conductor cable for 5 pin 15 Amp switch socket outlet.

S&F modular switch one way 5 Amps 1 module complete all as specified and direced.

S&F modular switch, Bell push flush type 5 Amps complete all as specified and direced.

S&F switch socket outlet 2 in 1, 5 pin, 5 Amps modular type 3 module complete all as specified and direced.

S&F switch socket outlet 2 in 1, 5 pin, 15 Amps modular type 3 module

S&F socket outlet 5 Amps modular type 2 module

S&F bell, ding dong type AC, 230 Volt, single pole.

S&F modular switch, flush type single pole, two way 5 Amps complete all as specified and direced.

M&L ceiling rose, PVC /polycarbonate, isolated body complete all as specified and direced.

S&F stepped type electronic fan regulator modular type 1 module complete all as specified and direced.

M&L for rewinding of ceiling fan of size 1200mm sweep with super enamelled copper winding wire of existing gauge, reassembling the same complete all with repalcement of ball bearing ,canopy, condenser and down rod etc complete all as specified and directed.

S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 04 Sq mm drawn into and including non metallic medium duty rigid concealed PVC condute not less than 25 mm size ISI marked with all fittings / accessories and 04 Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

S&F Submain wiring with two single core PVC insulated FRLS multistrand copper conductor cable of size 10Sq mm drawn into and including non metallic heavy duty rigid concealed PVC condute not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) with all fittings / accessories and 10Sq mm FRLS multistrand copper conductor cable as continuous earth wire complete. (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate quoted for this items.)

S&F Sheet metal enclosure 4 way double door type for distribution board when MCB to be used TPN 4 way ,415 volt complete all as specified and directed.

S&F Sheet metal enclosure 12 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed

S&F MCB TPN 63 Amps 415 volt rupturing cap 10 KA "C" series complete all as specified and directed.

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 kA breaking capacity :B" curved type complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and directed.

S & F Sheet metal enclosure, powder coated single pole and neutral with two pin and earth plug and socket (Mettalic) complete with one single pole MCB for 240 volts 20 Amps rating rupturning capacity 10 KA complete all as specified and directed.

Supply and fix LED light fittings 1x18 watt ,220 volt AC decorative box type with driver holder including 18 watt LED tube light connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed.

Supply and fix angle holder backlite with 1x9 wtt LED bulb includig all fixing accessories and making connection with copper conductor complete all as specified and directed.

M&L for Sleek LED mirror light 10 watt rating with diffuser 2ft long twisted flexible copper wire (approx 0.5 mtr long) complete all as specified and directyed & approved by EIC.

Supply and fixing LED security light 45 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as specified and directed.

Hindustan Traders