Replacement of old Split Window type AC machines at various places with allied EI work

Amount

Complete dismantling of the exiting Window/ Split type AC machines as per direction of EIC and mending good the damages to original finish.

S&D of High Wall Split Air Conditioner with R410A / R407C / R-32 Refrigerant, with Rotary Compressor with minimum Cooling Capacity of (5.3 KW - 5.9KW), Air flow rate (550- 828)CFM, Minimum cu. pipe Length from ODU to IDU not less than 3 MTR & suitable for operation on 230V,+_ 5% , 50Hz, 1Ph AC Supply. with precharged refrigerant, Wireless remote & all other accessories complete with refrigerent with 15 A Plug Top (Make - OGeneral/Mitsubishi Electric/ Mitsubishi Heavy)

S&D of High Wall Split Air Conditioner with R410A / R407C / R-32 Refrigerant, with Rotary Compressor with minimum Cooling Capacity of (6.6KW-7.00 KW), Air flow rate (630-875) CFM, Minimum cu. pipe Length from ODU to IDU not less than 3 MTR & suitable for operation on 230V,+_ 5% , 50Hz, 1Ph AC Supply. with precharged refrigerant, Wireless remote & all other accessories complete with refrigerent with 15 A Plug Top (Make - OGeneral/Mitsubishi Electric/ Mitsubishi Heavy)

S&D of window type room Air Conditioner with Rotary compressor having cooling capacity (6.3 KW-7.0 KW) suitable for operating at 230 +/- 10% frequency 50 Hz. Single phase AC supply with, discharge air flow volume ( 540-570)CFM , 3 speed Fan Control (High/Medium/Low), high voltage protection, having features with turbo fan modes (Auto,Cool,Fan,Dry). with 15 A Plug Top (Make - OGeneral/Mitsubishi Electric/ Mitsubishi Heavy/Carrier)

Installation, testing & Commissioning High wall Split type AC Machine with all accessories i.e., fastner, nut bolt, wall cutting, all glass window/grill cutting where needed with S&F heavy gauge ODU iron bracket incl. mending good damages in place of Old Split AC Machine as per direction of EIC.

Installation, testing & Commissioning Window type AC Machine with all accessories i.e.,wooden frame, fastner, nut bolt, wall cutting, all glass window/grill cutting where needed incl. mending good damages in place of Old Window AC Machine as per direction of EIC.

S&F HVAC grade of Copper Refrigeration pipe line for liquid and suction line with hard/soft drawn copper piping with supports & brackets (Royku/Totaline/Mandeep)

a) Liquid Line ( 1/4" dia) with 9mm thick nitrile insulation with having aluminium foil wrapping and coating over insulation

b ) Suction Line (5/8" dia) with 9mm thick nitrile insulation having aluminium foil wrapping and coating over insulation

Supply & Drawing 3 core 2.5 sqmm PVC insulated shethed unarmoured copper cable (FRLS) for connecting the outdoor to indoor supply ( Make-RR Kabel/Poly Cab/Gloster) [From 25A socket to outdoor unit]

Supply & Drawing 4 core 2.5 sqmm PVC insulated shethed unarmoured copper cable (FRLS) for connecting the outdoor to indoor supply ( Make-RR Kabel/Poly Cab/Gloster) [From outdoor unit to indoor unit]

Supply & Installation of medium guage PVC pipes of 25 mm dia. for drain water incl. necessary fitting & fixing accessories such as bend, elbow, saddles etc including scaffolding arrangement.

S & F of 1'' thick good quality waterproof wooden plank on wall with switable size bullet fastener, screws etc. to house the indoor unit of the AC machines and to cover the open area of wall after dismantling the old window type AC machines

Hiring Charges for scaffolding arrangement including dismantling at the end of work and carriage, per storey of building per vertical run.

S & F 250V, 25A AC timer controller in SS double door 12 way DB enclosure (Legrand Cat no 607712) with S & F following electrical accessories & front door locking arrangement with all connection, earthing attachment on wall as per direction of EIC. i) 25A DPMCB (LT make cat no B20250C) ---1no ii) 24Hr programmable Digital timer (LT make Cat no 67DDT0)----1no iii) 3pole power contactor (LT make cat no MNX22/230V)--- 1no iv) 2Moduler AC motor starter (Legrand/ Myrius Cat no 673031)--1 no v) Metal Din Channel MCB supporter---2nos vi) 2 module plate with cover (Make-Legrand/ Myrius)--- 1no vii) 25A On-Off-On toggle switch--- 1no viii) LED indication lamp--- 1No ix) Outgoing connector make ELMAX--- 2nos x) Mechanical locking arrangement --- 1no xi) Necessary connection with 1.5 sqmm copper wire.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying and Drawing 1.1 KV single core stranded 2 x 4 sqmm + 1 x 2.5 sqmm 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes 20 mm dia 3 mm thick rigid PVC conduit (Precision make) incl S&F of 20 mm dia, 3 mm thick pvc rigid conduit and making necy. connection as required.

Finishing of the 2x 4 sqmm + 1 x 2.5 sqmm PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., ncluding supplying sockets, tapes.

Less : Cost for dismantling & unserviceable 1.00/2.0 /2.2Tr. Split type AC Machine including all accessoriesas or as per site condition as per direction of EIC

Less : Cost for dismantling & unserviceable 2Tr. Window type AC Machine as per direction of EIC

Terms and Condition:

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. (Applicable for Item Nos. 2,3 & 4)

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill. (Applicable for Item Nos. 2,3 & 4)

If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability Period - 1 (One) year from the date of completion

Make & model of each and every material to be approved by EIC

MILLENNIUM AIRCON (BID ID -6772476)

Lyric International (BID ID -6756854)

GHANASHYAM ELECTRIC STORES (BID ID -6776708)