CONSTRUCTION OF ATC TOWER ALONG WITH ALLIED SERVICES

Amount

NOTE (Applicable for all parts/items):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

SCHEDULE "A" Part - I (BUILDING / STRUCTURES WORK ) Details of pre priced schedule is given in tender documents

SCHEDULE "A" PART-II (SITE CLEARANCE, EARTH WORK AND EXCAVATION ) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART-III (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART-X (LIGHTENING PROTECTION) Details of prepriced Schedule is given in tender documents

SCHEDULE "A" PART-XI (VERTICAL CABLE DUCT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XII (SIGNAL SQUARE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIII (RCC CABLE DUCT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XIV (RAIN WATER HARVESTING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XV (FIRE HYDRANT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XVI (MISCELLANEOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' 5 ' signifies this fact only.

S&F 15 mm bore angle stop cock brass CP high pressure with capstan head, long shank screwed down complete all as specified and directed.

Supply and laying of polythene film sheet of thick 400 micron all as specified and as directed.

Supply only Non-circular synthetic fibre, 6/12 mm long with circum-circle diameter 30 -35 micron, designed for melting point 240-260 degree centigrade and having specific gravity 1.34 to 1.40 etc complete all as specified and directed. (Make - Reliance RECRON 3S or equivalant as approved.)

M&L for forming 25mm thick expansion joint for full depth of PQC and filled with pre-moulded compressible filler board HD-100, provision of closed cell polyethylene backup rod of 30mm dia filled with polyurathane sealant complying with BS-4752 and EH-141875-2003. Priming the side with two coats min MAF+30% with 10 years performance guarantee and aplying masking tape on edge of joint to prevent accident spillage of sealant and remaining the top 15 mm with approved primer and sealed with polyurethane bssed sealant (complying with latest IRC 57-2006 with 10 years guarantee), applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the masking tape after filling of sealant by mechanical means all as per the directions of the manufacturer complete all as specified and as directed.

M&L for forming construction joint 25mm deep x 10mm wide using diamond bit cutter with closed cell, medium density, crossed linked polyethylene foam back up rod of 12mm dia for complete width of the joint, priming the top 10mm with approved primer and filling with polyurethane/ polysulphide based sealant with min MAF +30% (with 10 years guarantee) applying masking tape on edges of joint to prevent accidental spillage of sealant and removing the masking tape after filling of sealant all as per the directions of the manufacturer complete all as specified and as directed.

M&L Forming dummy/contraction joint using diamond cutter with initial saw cut with 3 mm blade soon after concrete sets for the depth of 75 mm, widening the first saw cut to 10 mm wide and and 22 mm deep from top priming top 10 mm with approved primer, applying masking tape on edges of joint to prevent accidental spillage of sealant and filling with polyurethane/polysulphide based sealant to close cells, medium density, cross linked polyethylene foam back up rod of 12mm dia for complete width of the joint and removing the masking tape after filling of sealant min MAF +30% (with 10 years performance guarantee) and as specified and as per the directions of the manufacturer complete all as specified and and as directed.

Construction of Septic Tank for 50 users complete all as shown on drawings and as specified.

Construction of Soakage Well for 50 users complete all as shown on drawings and as specified.

Construction of brick masonry valve pit of internal dimension 120 cm x 120 cm x 90 cm depth with fly ash bricks in CM (1:4) and 10 mm thick plastering in CM (1:4) internally and externally upto 15 cm below GL, 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded broken stone aggregate) as in foundation lean concrete, PCC (1:3:6) type C1 (using 20 mm graded broken stone aggregate) as in bedding and copping, MS frame with 40x40x6 mm angle iron all around fixed by means of 04 Nos holdfast 150 mm long made out of 40x6mm embedded in PCC block 1:2:4 type B-1 (using 20 mm graded aggregate) of size 250 x 200 x 150 mm, 3 mm thick MS sheet cover plate with locking arrangements including 65 mm dia Godrej pad lock, hinges and two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surface, three coats of white wash on plastered surface (exposed to view) including necessary excavation in soft/loose, soil, returning filling in and removal of surplus soil to a distance not exceeding 50 m complete all as specified and directed.

Supply, installation, testing & commissioning of Ring Main Unit (RMU) IP 65 enclosure metallic comprising of two outgoing and one incoming with SF-6 filled load break switch of 11 KV, 630 Amp including earth link switch, a microprocessor based relay having over load , earth fault, short circuit WTI and OTI protection arrangement complete alongwith all necessary standard fittings all as specified and as directed.

M&L Automatic power factor correction (APFC) panel for 3 phase, 415V & 50Hz system of capacity 175 (25x7) KVAr with MD-XL heavy duty cylindrical capacitor and microprocessor controlled 7 stage, including MCCB 200 Amp 4 pole 25 KA as incomer, completely housed in MS sheet enclosure 2.0 mm thick, complete loop wiring and meters, indicator complete all as specified and as directed.

Supply, installation and commissioning of Servo Controlled Voltage Stabilizer of 1000 KVA capacity (conforming to BIS 9815 : Part 1:1994) Three phase, 50 Hz, Naturally Oil cooled,, indoor, unbalanced type, cooper wound, metallic body duly powder coated with lifting hooks two nos, digital display type, relay free smooth and silent operation with 1st filling of Transformer oil up to level having following specification:- (a) Input voltage 300V-480V, (b) Output voltage stabilized at any designed/desired voltage 415V + 1% (c) Rated frequency 50 Hz (d) No distortion in wave form (e) Response time not to exceed 20 milli seconds (f) Sensitivity ( + )1% (g) Rate of correction 8 Volt/Second for single phase and 13V/Seconds for phase to phase (h) Efficiency more than 95% (i) Type of load: three phase, unbalanced type (j) Digital display Voltmeter/Ammeter Protection :- 1 Overlaod/Short Cirucit protections 2 High/Low voltage cut off 3 Bypass arrangement in case of emergency 4 single phase sequence change protection.

Taking out HT/LT cable of any size and rerouting the same by using unbreakable bricks and new and fresh sand at new location as per site requirement all as specified and directed. Note : Excavation and earth work shall be measured separately.

Supply, delivery, installation and testing of Graphite and Portland cement based truly maintenance free chemical earthing system comprising with following :- (a) Earth electrode should be 17.2 mm dia, 3 mtr, Long solid rod or low carbon steel, molecularly copper bonded for a thickness of 250 micron & UL 467-2007 certified with exochemically welded copper clamp. (b) Earth electrode should be tested by CPRI, Bangalore. (c) Current carrying capacity of Earth electrode should be minimum 25 KA/Sec (d) Minimum requirement of 33 Kg Graphite and Portland based EGEM ground enhancing material per pit. (e) Ground enhancing material (EGEM) should be graded granular graphite/carbonaceous compound (as per Clause 8.5 of BS 7430 : 1998) (f) Should be conductive concrete in nature (as per clause 9.2.2 of BS 7430 : 2011) (g) Resistivity of the BFC should be less than 0.12 Ohm (as per clause 14.5 d of IEEE-80 : 2000) (h) Should confirm IS 3043:1987 clause 9.2.2. (j) Should confirm IS 7430:1998 clause 8.5(c) (k) Should confirm IS 7430:2011 clause 9.2.2 (l) Should confirm IEC 62561-7-2011 clause 5.1, 5.2, 5.3, 5.4, 5.6 etc. (m) Should having test report from NABL accredited laboratory (n) Hydroscopic, Hydrolysis and hydrophilic in nature. (o) Truly maintenance free. (p) Never need recharging. (q) Should not contain any hazardous chemicals. (r) Not to be effected by drought. Make : ENNOV or equivalent. Note :- 1. The soil should be dug out from the 100-125 mm dia and 3450 mm deep earth pit manual augar and / or any other suitable procedure. 2. A layer of 150-200 mm of the ground enhancing material should be poured at the bottom of the 100-125 mm bore hole of earth pit. 3. If grid is required necessary inter connection shall be carried out by 20 mm x 3 mm copper strip which shall be buried below 600 mm (as per IS 3043, IEEE 80).

S & F for cable route/joint indicator made of RCC slab of size 90 cm x 30 cm x 5 cm embedded in ground on the route of cable duly marked with HT cable / HT cable joint.

Supply & fixing street light assembly 6000K LED lamp 90 W complete all as specified and directed. Make : C&S Model No. LTESST90WLLED/LS or equivalent from make list as specified in PS.

S&F PVC insulated unsheathed multistranded copper conductor 2.5 Sqmm 1100 V grade twin core for street light connection from fitting to junction box all as specified and directed.

S&F Sheet metal enclosure for DBs, single door, single pole and neutral 2 way along with one No MCB SPN 10 Amps all as specified and directed.

S&F isolation transformer 1:1 single phase 230 Volts 50 Hz of capacity 2 KVA all as specified and directed.

Supply & fix surge protection device IEC class I/EN type 1 & 2 surge suppresser as per IEC for MDP three phase complete all as specified and directed..

Supply and fix ceiling mounted dimmer controlled spot lighting assembly with 5 watts LED 60000K type all as specified and directed.

Supply and fix UPS for 30 min back up single phase AC input 160 to 260 V and output 230V ±1% of capacity 1 KVA all as specified and directed.

Supply & fixing insulation mat 2m x 1m x 2.5 mm.

M & L for boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all directed.

Material & labour for Fly Ash bricks locally available (250mm x 125mm x 75mm), laid in trenches perpendicular to the length of the under ground cable protection complete all as specified and as directed.

Supply & fix vertical TPN DB with MCCB Incomer, 8 way, IP 43, glazed door ,which conforms to IS 8623-1 & 3, IEC 61439-1 &A 3, available on CRCA sheet steel, RAL 9003, powder coated complete all as specified & directed. Make : L&T Cat part No- DBVTH008GD or equivalent from make list as specified in PS.

Supply & fix SPN DB, 12 way, IP 43, glazed door ,which conforms to IS-8623-1 & 3, IEC 61439-1 & 3, available in CRCA sheet steel, RAL9003, powder coated complete all as specified & directed. Make: L & T Cat Part No –DBSPN012GD or equivalent from make list as specified in PS.

Supply and fix MCCB, 4 Pole,415 volts, 125 Amps, 16 KA rupturing capacity ‘C’ series complete all as specified and directed.

Supply and fix MCB DP, 240 volts, 32 Amps, 10 KA rupturing capacity ‘C’ series complete all as specified and directed. Make: L & T Cat Part No-BB20320C or equivalent from make list as specified in PS.

Supply and fix MCB SP, 240 volts, 16 Amps, 10 KA rupturing capacity ‘C’ series complete all as specified and directed. Make: L & T Cat Part No- BB10160C or equivalent from make list as specified in PS.

Supply and fix LED step light 3 watt in powder coated die cast aluminium housing in IP 65 protection. Make Surya Cat Part No SLE STL 3W or equivalent from make list as specified in PS.

Supply & fix LED batten 1x18 watt pre-wired suitable for use of LED tube. Make: Surya Cat Part No-SUB 118T8 LED or equivalent from make list as specified in PS.

Supply & Fix LED tube 18 W Aluminium Extrusion, environment friendly, energy saving, T8 LED tube with high luminous efficacy. Make: Surya, Cat Part No-SLE TL-DS 18 P or equivalent from make list as specified in PS.

Supply & fix Wall /ceiling mounted 9W LED T5 AL Batten with extruded aluminium housing & integrated LED driver. Make: SURYA,Cat Part No-SLE BT 10 or equivalent from make list as specified in PS.

Supply & fix ceiling fan of 1200 mm sweep with 5 star energy rating. Make: Havells, Cat Part No-ES NEO or equivalent from make list as specified in PS.

Supply & fix exhaust fan metallic type, 230mm sweep. Make: Havells Cat Part No –Ventil Air -DSP or equivalent from make list as specified in PS.

Supply & fix 2' x 2' LED flat panel light 34W, aesthetically designed for surface mounting with soft light and glare free symmetrical illumination. Make : Havells, Cat Part No. LHEWEIP6PW1W034 or equivalent from make list as specified in PS.

Supply & fix table mounted spot light having flexible mounting cord, dimer control fixing in controller desk.

Materials and labour for Chemical Earthing complete with copper earth plate electrode 90 Cm x 60 Cm x 5 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to copper strip 50 x 6 mm as earthing lead by means of bolts, check nuts and washers as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm x 30 cm x 30cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade ) for watering, charcoal or coke salt in alternatives layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in electrical plate No 3 of SSR Part-1.

Supply and fix single pointed air termination, copper rod, 20mm dia, 300mm long complete all as specified and directed.

Supply and fixing porcelain insulator with nut bolt and washer on wall to fix the strip of cooper.

M & L MS cubical shape of enclosure make 3.15 mm thick with front operation door and locking arrangements, fixing screws, duly painted of overall dimension 200 x 100x 75 mm for installation test point.

Supply and fixing of integral LED Aviation obstruction light comprising of aluminium housing with polycarbonate enclosure clear thick glass and accessories including fixing materials i.e. MS clamps, Nut & bolts etc.

Design, supply, installation, testing & commissioning Passengers Lift (8 passengers, 544 Kg), speed 0.5 meters/sec lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS 14665, suitable to serve G+03 upper floors with AC variable voltage & variable frequency drive (VVVF drive) complete with all standard accessories, simplex automatic and manual dual controlled drive with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD system), 3D infrared sensor in full height of doors and built in announcing system without hand set (04 Nos, one each in car, Machine room & near ground floor landing door), 01 No 225 mm single phase 240 Volt cabin fan, 02 Nos 7 W LED ceiling light, 01 No emergency lamp with 12 volt battery backup, 01 No fire extinguisher, 01 No Digital display board for data analysing and information complete all as specified and directed.

Supply, installation, testing and commissioning of Silent Diesel Engine driven generating set 415 Volts, 3 phase 4 wire, engine as per IS : 10001/10002 and alternator as per IS : 13364 complete with relay panel for automatic starting on mains failure, control panel having meters, sound proof canopy and concrete foundation etc. of capacity 630 KVA 4 Stroke, designed to run 1500 RPM complete all as specified and directed comprising of following accessories:- A) Diesel Engine:- (i) Radiator Cooling (ii) Radiator fan with guard (iii) Fly wheel with starter ring (iv) Dry type air cleaner (v) Vacuum indicator (vi) Mechanical Governor (vii) Exhaust Silencer (viii) Fuel filter (ix) Inline Fuel pump (x) Water pump (xi) Lub oil filter (xii) Lub oil pump (xiii) 24 V electric start system complete with starter, battery charging alternator. (xiv) Engine control panel consisting of starting key switch, lub oil pressure gauge ammeter safety shut down system for low Lube oil pressure & High coolant temperature Engine maintenance manual with spare parts list. (xv) Exhaust pipe/ stack up to 6.0 meter from top of shed with insulation, structural steel required for supporting exhaust pipe/stack, fixed, sliding supports etc. (xvi) First fill of lube oil & coolant (xvii) Residential Silencer with cladding & supports

Serial Item No. 16.56 (Contd....) (E) Accessories. (i) Base frame of sturdy design as per OEM – 1 set (ii) Fuel tank rectangle shape capacity 990 ltr with fuel measuring indication complete. (iii) Batteries 12V, 180 AH maintenance free with leads & connecting accessories – 02 Nos. (F) Spare parts & tools. (i) Rotary pump diesel with 3 meter hose – 1 set (ii) Box spainer set complete with all size – 1 set (iii) Oil filter set – 2 Nos (iv) Air filter complete with element - 2 Nos (v) Fuel filter set – 2 Nos (vi) AVR -1 No (vii) Rubber matting size 0.9 mtr x 1.5 mtr x 15 mm thick – 2 Nos (viii) Jerrican MS sheet capacity 20 Ltr- 2 Nos Note :- (i) PCC foundation shall deemed to be included in unit rate of DG set. PCC foundation of adequate/ required size extending 500 mm all-round more than size of DG set, as per manufacturer design. (ii) DG set shall be tested as type test, routine test as per IS in presence of GE/ his rep. (iii) The contractor shall submit QAP (quality assurance programme) with in the 15 days from placement of order for DG set testing at factory premises. DG set shall be dispatch after inspection clearance by inspecting officer. (iv) The contractor shall get the approval of GE for the make of the DG set they plan to procure. (v) Prior to manufacturing the general arrangement drawing design details of AMF panel shall be got approved by GE.

Supply and installation high wall electrically driven single phase split AC unit indoor/outdoor complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of 1.5TR capacity complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type wall mounted type designed for input variation between 150V to 280V with output voltage stabilized at 230 V with accuracy of + 8% and of capacity 4.0 KVA, 12A complete all as specified and directed.

Supply, installation and commissioning of water cooler storage type with fully stainless steel, electric driven 230 V 50 Hz single phase supply com PUF insulation, adjustable cold water thermostat, auto cut facility, overload protection, stainless steel front pane, extended plastic egs, eco-friendly version with Refrigerant-134A, reciprocating type compressor and approximate storage capacity of 80 ltrs and nominal cooling capacity of 40 ltrs per hour all as specified and as directed. (Model : SDLX-480 of Blue Star or equivalent.)

Supply, installation and commissioning Table lamp with 6 W LED single Phase 230 Volts 50 Hz.

S&F Hand dryer 230 Volts single Phase smart flow stainless steel body. Cat No. HDR-WHT-M04A of Make-Jaguar.

S&F Medium size Chandelier with colourful lighting complete all as specified and directed.

M&L Wiring for PA system with 0.5 Sqmm copper conductor cable complete all as specified and directed.

S&F Water heater storage type, electric supplied and installed complete capacity 25 ltrs. Make : Bajaj Model No. 25 GPU Or any other make of similar model

S&F for Rigid non-metallic PVC conduit 25 mm external dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.

Supply, install, testing & commissioning intelligent addressable fire alarm control panel complying with EN 54 standard & LPCB approved and battery backup upto one hour with the specifications as appended below :- (a) Power – AC 230 V, 50 Hz, 0.5 A (b) 99 Devices (c) 99 Detectors and minimum 01 loop (d) Relay-Fire Alarm/F.P.E/Fault/Sounder (e) Network-RS-485 interface (Max 32 panels) & network card (f) PC Port-RS-232 interface & communication card (g) Printer Panel and LCD display and inbuilt printer with battery backup of 24 hours in non alarm condition and 15 minutes in alarm condition (Battery type 2x12V 21 AH, sealed type Make :- Exide/Amron/Amar Raja. Make of fire alarm Control Panel : GST/Siemens/Apollo/Morley

Supply and installing the flowchart based programmable RTU along with battery (maintenance free) back up for 12 hours, in case of power failure. SMS and wireless modem suitable for GSM/GPRS output communication system to be mounted in RTU enclosure input /output as per requirement in system (a) 3 Serial Port (b) Digital input(optical isolation) (c) Digital outputs (d) Isolated analog inputs for monitoring of temperature and humidity. (e) Local display, membrane keyboard and data storage (f) Compatibility with GSM Modem (g) Isolation transformer for RTU protection -01 No, complete all as specified and directed. Make : Cimcon/Saftek/Powertek

Supply and installing RTU logic development for Central Monitoring through wireless communication at Master Control Station. It includes the development of logic for false alarm which comes from Addressable fire alarm and addressable fire alarm panel complete all as specified and directed Make : Cimcon/Saftek/Powertek

Supply & fixing wireless Modem suitable for GSM based communication system to be mounted in RTU enclosure complete all as specified and directed. Make : Cimcon/Saftek/Powertek

Supply of GSM SIM card Rental and SMS charges for the period 12 months complete all as specified and directed.

Supply and fixing of Network Repeater panel is based on network technology, providing remote control and indication of the fire alarm system : Provide remote display and control of system, Password protected access level; 8x18 characters LCD screen, 15 LEDs to display important information, functional control of network panels, Network-wide operation: Acknowledge, Silence, Reset, Flush-Mount or surface-mount structure. Make : GST/Siemens/Apollo/Morley

Supply, installation, testing & commissioning electronically addressable intelligent combination of heat and photo, electric smoke detector with mounting base complying with EN 54 standard & IS : 11360 and LPCB approved with the specifications as appended below :- (a) Power - 24V, ≤0.8mA (Standby current), ≤5.0 mA (Alarm current) (b) Class A2R (c) Indicator - Red Flashes in normal and illuminates in alarm (d) Ingress Protection IP-22 & Material –ABS Make : GST/Siemens/Apollo/Morley

Supply, installation, testing & commissioning electronically addressable intelligent resettable type manual call point with mounting base complying with EN 54 standard and LPCB approved with the specifications as appended below :- (a) Power-24V, ≤0.6mA (Standby current), ≤1.8 mA (Alarm current) (b) Class A (c) Initiating Mode : Pressing the action plate manually resuming Mode –Manually Resumed by a special key (d) Ingress Protection IP-43 & Material –ABS Make : GST/Siemens/Apollo/Morley

Supply, installation, testing & commissioning electronically addressable intelligent remote response indicator with mounting base complying with EN 54 standard and LPCB approved with the specifications as appended below :- (a) Power-24V Class A (b) Material-ABS Ingress Protection IP-43 & Material – ABS Make : GST/Siemens/Apollo/Morley

Supply, installation, testing & commissioning electronically addressable intelligent Sounder/siren with mounting base, continuous normal operation for at least 50 minutes with sound level 65db-120db measured at 1.5m with sound output variation +5db complying with the specifications appended below :- (a) Power-12/24V DC or 110/220V AC, 1Ph, AC, 50 HZ (b) Range-1000m Make : GST/Kheeraj/Implex

Supply and fix of amplifiers suitable 100 Watts, 230 VAC 50 Hz complete all as specified and directed. Make : Kheraj/Ahuja/Philips/Bosch

Supply and fix Loud speaker 10 Watt 230V, 50HZ, of sturdy design weather proof type with Re-entrant horn type loud speaker for operating under rough condition complete all as specified and directed. Make : Kheraj/Ahuja/Philips/Bosch.

Supply and fix for wiring for circuit/submain wiring alongwith earth wire with the 2x1.5 Sq.mm + 1x 1.0Sqmm earth wire sizes of FR PVC insulated copper conductor, single core cable drawn in steel conduit in surface/recessed as required. Make : Havells/Finolex/Polycab

Material & Labour 150mm thick (compacted thickness) Wet Mix Macadam (WMM) in two layers each layer 75mm thick compacted separately with crushed stone aggregate of specified grading (63mm to 40mm size), rolled and consolidated using power roller exc 8 tonne but n. exc 12 tonne as specified to required gradient and camber complete all as specified and as directed.

S&F brass CP 15mm dia combination tap consisting of one bib tap, one stop cock/angle cock with brass CP health faucet and 750mm long flexible pipe complete all as specified and as directed.

SCHEDULE "A" PART-XVII (SCHEDULE OF CREDIT) Note :- Amount of Rs. 162970.00 indicated in Tender as Schedule of Credit shall be deducted from the total quoted amount of BOQ.

surendra infrastructure pvt ltd

SOOD ASSOCIATES PVT LTD

ENGINEER CONSTRUCTION PVT. LTD.

Girdhari Lal Constructions Pvt. Ltd.

Som Projects Pvt. Ltd.

RAGHUSONS INFRA ENGINEERING PVT. LTD

SHRI GURMUKHDAS CONTRACTORS PVT. LTD.

MANGLA AMIT BUILDERS PVT LTD