Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.6 LAccepted-AOC NEAR SATSANG GARACHARMA BASTI GARACHARMA PORT BLAIR 744 105 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744105 | L1 | Accepted-AOC L1 | |
| 2 | L2₹1.1 Cr+₹12.2 L (12.6%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹1.1 Cr+₹12.4 L (12.8%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹1.1 Cr+₹15.6 L (16.1%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹1.2 Cr+₹18.9 L (19.5%)Rejected-Finance STREET NO 11 SECTOR 4 TILAK NAGAR SAGAR ROAD BIKANER 334001 RAJASTHAN | BIKANER | BIKANER | RAJASTHAN | 334001 | L5 | Rejected-Finance Not being lowest |
| Sl No | Description | Qty | Unit | P VENKATA RAO L9 | MURALI KRISHNA ASSOCIATES L10 | S AND A ENGINEERS CONSTRUCTION CO L6 | SINGH ENTERPRISES L4 | M/s. Shiva Engineers L3 | BHAGWATI CONSTRUCTION L7 | SHIVA CONSTRUCTION COMPANY L8 | SHISHODIA ENTERPRISES L2 | BHAWANI CONSTRUCTION COMPANY L11 | M/s Sriya Enterprises L1 | Jasraj & Company L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of exesting PCC/RCC/cement mortar chattri/dome/façade and any any position complete all as specified and directed by Engineer-in-charge. | 30 | Each | 270 ₹8,100 | 250 ₹7,500 | 200 ₹6,000 | 150 ₹4,500 | 100 ₹3,000 Lowest | 200 ₹6,000 | 1,000 ₹30,000 | 300 ₹9,000 | 300 ₹9,000 | 300 ₹9,000 | 100 ₹3,000 Lowest |
| 2.00 | BASE- supplying & fixing (i) stone masoary on outer wall (ii) gap between outer wall is filled by brick work. (iii)127mm thick mortar laying on top surface of masonary. (iv) 4'' chap on top surrouding. (v) Cleaning of stone surfaes and pointing on exposed face complete all as specified and directed by Engineer-in-charge. | 9.41 | Cum | 10,080 ₹94,852.8 | 10,000 ₹94,100 | 8,000 ₹75,280 | 5,200 ₹48,932 | 5,000 ₹47,050 Lowest | 8,500 ₹79,985 | 30,000 ₹2,82,300 | 10,200 ₹95,982 | 11,000 ₹1,03,510 | 7,500 ₹70,575 | 5,000 ₹47,050 Lowest |
| 3.00 | Supplying and fixing Jaisalmer stone moulded cornice of 100 mm X 1219 mm over chap with flute fully dressed and carved with ornamental work complete. When fully exposed complete all as specified and directed by Engineer-in-charge. | 11.69 | Sqm | 4,500 ₹52,605 | 4,500 ₹52,605 | 9,000 ₹1,05,210 | 5,100 ₹59,619 | 5,000 ₹58,450 | 3,300 ₹38,577 Lowest | 8,000 ₹93,520 | 3,500 ₹40,915 | 4,000 ₹46,760 | 3,500 ₹40,915 | 5,000 ₹58,450 |
| 4.00 | Supply and fixing Dassa exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even) (a) upto 15 cm thick Red Ashlar. followed traditional pattern of jaisalmer complete all as specified and directed by Engineer-in-charge. | 12.43 | Sqm | 5,580 ₹69,359.4 | 5,500 ₹68,365 | 7,500 ₹93,225 | 5,990 ₹74,455.7 | 6,000 ₹74,580 | 5,400 ₹67,122 | 8,000 ₹99,440 | 5,400 ₹67,122 | 6,000 ₹74,580 | 5,000 ₹62,150 Lowest | 6,000 ₹74,580 |
| 5.00 | (i) Supplying and fixing Jaisalmer stone pillars 150x150mmx380mm (lxbxh) (Surahidar) with flute fully dressed and carved with ornamental work complete. When fully exposed. (ii) Supplying and fixing Jaisalmer stone manjisa over pillar of size 150x150mmx480mm (lxbxh) (Surahidar) with flute fully dressed and carved with ornamental work complete. When fully exposed complete all as specified and directed by Engineer-in-charge. | 32 | mtr | 5,580 ₹1,78,560 | 5,500 ₹1,76,000 | 10,000 ₹3,20,000 | 8,100 ₹2,59,200 | 8,000 ₹2,56,000 | 5,400 ₹1,72,800 | 10,000 ₹3,20,000 | 5,700 ₹1,82,400 | 6,000 ₹1,92,000 | 5,200 ₹1,66,400 Lowest | 8,000 ₹2,56,000 |
| 6.00 | Supplying and fixing Jaisalmer stone Moulded arches Fully dressed carved with ornamental work 75 mm thick Fully Flowered leaves ornamental work on exposed surface complete all as specified and directed by Engineer-in-charge. | 13.82 | Sqm | 7,200 ₹99,504 | 7,000 ₹96,740 Lowest | 9,500 ₹1,31,290 | 8,100 ₹1,11,942 | 8,000 ₹1,10,560 | 7,000 ₹96,740 Lowest | 8,000 ₹1,10,560 | 7,100 ₹98,122 | 7,000 ₹96,740 Lowest | 7,000 ₹96,740 Lowest | 8,000 ₹1,10,560 |
| 7.00 | Supply and fixing lintel stone exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even)(a)ornamental work on exposed surface complete all as specified and directed by Engineer-in-charge. | 0.86 | Cum | 90,000 ₹77,400 | 1,00,000 ₹86,000 | 5,500 ₹4,730 | 4,600 ₹3,956 | 4,500 ₹3,870 Lowest | 1,00,000 ₹86,000 | 30,000 ₹25,800 | 95,000 ₹81,700 | 90,000 ₹77,400 | 60,000 ₹51,600 | 4,500 ₹3,870 Lowest |
| 8.00 | Supplying and fixing Jaisalmer stone Chhajja (including projection) 50 mm Thick fully dressed carved with cut stone work weather dripped complete(B) For Corner piece complete all as specified and directed by Engineer-in-charge. | 21 | Sqm | 5,400 ₹1,13,400 | 6,000 ₹1,26,000 | 7,500 ₹1,57,500 | 5,900 ₹1,23,900 | 6,000 ₹1,26,000 | 5,500 ₹1,15,500 | 8,000 ₹1,68,000 | 6,500 ₹1,36,500 | 7,000 ₹1,47,000 | 5,000 ₹1,05,000 Lowest | 6,000 ₹1,26,000 |
| 9.00 | Supplying and fixing Jaisalmer stone kani fine dressed and ornamental cut work upto half depth complete all as specified and directed by Engineer-in-charge. | 5.84 | Sqm | 4,500 ₹26,280 | 3,800 ₹22,192 Lowest | 7,500 ₹43,800 | 6,000 ₹35,040 | 6,000 ₹35,040 | 4,500 ₹26,280 | 8,000 ₹46,720 | 3,800 ₹22,192 Lowest | 4,000 ₹23,360 | 4,380.56 ₹25,582.47 | 6,000 ₹35,040 |
| 10.00 | Supplying and fixing Jaisalmer stone kangoora fine dressed and ornamental cut work upto half depth complete all as specified and directed by Engineer-in-charge. | 2.9 | Sqm | 22,500 ₹65,250 | 23,000 ₹66,700 | 12,000 ₹34,800 | 10,000 ₹29,000 | 10,000 ₹29,000 | 23,000 ₹66,700 | 8,000 ₹23,200 Lowest | 23,500 ₹68,150 | 24,000 ₹69,600 | 25,000 ₹72,500 | 10,000 ₹29,000 |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
24 Oct 2025, 6:00 pmClosed
GE Army Jaisalmer
GE Army Jaisalmer - 345001
REPAIR TO EXISTING PCC JALI JAFRI, PCC, RCC CHATRI, EXISTING COMPOUND WALL AND VARIOUS COLUMN PILLARS AS FACADE IN POCKET NO. 01 TO 22 UNDER MIL STN JAISALMER
2025_MES_731774_1
8526/25-26/E8
Open Tender
Civil Works
Item Rate
270 days
Jaisalmer
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
GE Army Jaisalmer
₹1.9 L
Yes
1 Jan 2026
19 Sept 2025
28 Oct 2025
19 Sept 2025
24 Oct 2025
10 Oct 2025
Amount
Dismantling of exesting PCC/RCC/cement mortar chattri/dome/façade and any any position complete all as specified and directed by Engineer-in-charge.
BASE- supplying & fixing (i) stone masoary on outer wall (ii) gap between outer wall is filled by brick work. (iii)127mm thick mortar laying on top surface of masonary. (iv) 4'' chap on top surrouding. (v) Cleaning of stone surfaes and pointing on exposed face complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone moulded cornice of 100 mm X 1219 mm over chap with flute fully dressed and carved with ornamental work complete. When fully exposed complete all as specified and directed by Engineer-in-charge.
Supply and fixing Dassa exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even) (a) upto 15 cm thick Red Ashlar. followed traditional pattern of jaisalmer complete all as specified and directed by Engineer-in-charge.
(i) Supplying and fixing Jaisalmer stone pillars 150x150mmx380mm (lxbxh) (Surahidar) with flute fully dressed and carved with ornamental work complete. When fully exposed. (ii) Supplying and fixing Jaisalmer stone manjisa over pillar of size 150x150mmx480mm (lxbxh) (Surahidar) with flute fully dressed and carved with ornamental work complete. When fully exposed complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone Moulded arches Fully dressed carved with ornamental work 75 mm thick Fully Flowered leaves ornamental work on exposed surface complete all as specified and directed by Engineer-in-charge.
Supply and fixing lintel stone exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even)(a)ornamental work on exposed surface complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone Chhajja (including projection) 50 mm Thick fully dressed carved with cut stone work weather dripped complete(B) For Corner piece complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone kani fine dressed and ornamental cut work upto half depth complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone kangoora fine dressed and ornamental cut work upto half depth complete all as specified and directed by Engineer-in-charge.
TOP DOME- Stone masonary for dome in cement sand mortar 1:3 including centering shuttering and pointing etc. up to 4.5 Mtr. height from plinth level: Cut stone fine dressed with fine joints, dome radius of 0.75m. and height of 1m. Includes kalash at top complete all as specified and directed by Engineer-in-charge.
Dismantling plaster work over stone face manually/ by mechanical. Making slits with the help of grinder & break with the help of hammer incl washing with get spray complete all as specified and directed by Engineer-in-charge.
Dismantling of exesting cement mortor/ POP designer façade on wall face in any position and height up to 10 M complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Arch Shape prol- Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 50 mm thick jaisalmer Sand stone and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete all as specified and directed by Engineer-in-charge. Note :- To be secured to the backing by means of cramps which shall be paid separately.
All as per item No 14.00 for Supplying and fixing Fine ornamental carving work on 50mm stone affixed to the vertical face complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Rectangular Shape prol- Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 50 mm thick jaisalmer Sand stone and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete all as specified and directed by Engineer-in-charge. Note :- To be secured to the backing by means of cramps which shall be paid separately.
All as per item No 16.00 for Supplying and fixing Fine ornamental carving work on 50mm stone affixed to the vertical face complete all as specified and directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge.
M&L for Jaisalmer stone for wall cladding (natural stone) 20-25 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by Engineer-in-charge.
M&L for Jaisalmer stone for wall cladding with fully polished 20-25 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by Engineer-in-charge.
Demolition of Brickwork or stone/ boulder masonry/PCC block masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engineer-in-charge.
M &L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed by Engineer-in-charge.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified and directed by Engineer-in-charge.
S&F rockface wall with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :Cement Mortar 1:4 ack side stone with fully dressed jaisalmer type complete all as specified and directed by Engineer-in-charge.
M&L for Jaisalmer stone rockface type wall cladding with fully polished 30-40 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone Jali 40mm wirh pillar 100x100x70 thick fully fine dressed carved upto full depth with ornamental cut stone work complete all as specified and directed by Engineer-in-charge.
Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified & directed by Engineer-in-charge.
M & L providing bottom runner stone beam (Jaisalmer type) fixed in line having size 100 x 200 MM fixed in cement mortar 1:4 and making ready for fixing of jaisalmer stone jalies and pillar complete all as specified & directed by Engineer-in-charge.
Supplying and fixing Jaisalmer Takiya and Thambli 75 mm thick. fully dress and with fine ornamental cut stone work complete for railing and parapet etc complete all as specified and directed by Engineer-in-charge.
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer in In cement mortar complete all as specified and directed by Engineer-in-charge.
Dismantling of beam. Including cutting of bars .dismantling of concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer in In cement mortar complete all as specified and directed by Engineer-in-charge.
Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 20 to 30 mm thick Pink Sand stone (Bansi Paharpur) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade Exposed face Machine cut complete all as specified and directed by Engineer-in-charge. Note :- To be secured to the backing by means of cramps which shall be paid separately.
All as per item No. 32.00 for Supplying and fixing Ornamental fine carving work on stone affixed to the vertical face complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone bracket stone Fully dressed fine carved with fine ornamental work 1200x450x100mm complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone rectangular side pillars (Surahidar) with flute fully dressed and fine carved with ornamental work complte.with top surfaced fine corniced complete all as specified and directed by Engineer-in-charge.
Supply & fixing of panel (leafing) dassa of size 75mm X 380 mm with 1:6 cement sand mortar (1- cement, 6-sand) ornamental work on one face of 100 mm side base should be dressed or hammered to attach with mortar properly complete all as specified and directed by Engineer-in-charge.
Supply & fixing of base stone for square pillars carved at edges in 1:6 cement sand mortar (1-cement , 6-sand) base should be properly hammered make proper joint with mortar complete all as specified and directed by Engineer-in-charge.
Supply & fixing of square pillar. Fine ornamental work on all 4 exposed faces, cornice work at 2 point complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone pillar railing 75mm thick. Fully dressed, fully fine complete all as specified and directed by Engineer-in-charge.
Supply and fixing ashlar lintel exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even)(a) upto 15 cm thick Red Ashlar.followed traditional pattern of jaisalmer complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge.
Morgale- Supplying and fixing Jaisalmer stone Moulded arches Fully dressed carved with ornamental work 75 mm thick Fully Flowered leaves ornamental work on exposed surface complete all as specified and directed by Engineer-in-charge.
Chajja- Supplying and fixing Jaisalmer stone Chhajja (including projection) 50 mm Thick fully dressed carved with cut stone work weather dripped complete(B)For Corner piece complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone kani fine dressed and ornamental cut work upto half depth complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone kangoora fine dressed and ornamental cut work upto half depth complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer Takiya and Thambli 38 mm thick. Fully dress and with fine ornamental cut stone work complete for railing and parapet etc complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Jaisalmer stone rain water spouts fully dressed and moulded with cut stone work projection 45 cm. And front end 10 cm x 10 cm. And tapering to other end 15cm. X 10 cm. In hexagonal shapes with ornamental work complete all as specified and directed by Engineer-in-charge.
Supplying and fixing Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 50 mm thick jaisalmer Sand stone and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade complete all as specified and directed by Engineer-in-charge for followings :-. Note :-To be secured to the backing by means of cramps which shall be paid separately.
Moulded Arch
Pillar & Manjisa
kangoora
Supplying and fixing Fine ornamental carving work on 50mm stone affixed to the vertical face complete all as specified and directed by Engineer-in-charge for followings :-
Moulded Arch
Pillar & Manjisa
kangoora
Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-charge.
Dubbing out average 10mm thick on irregularface of walls CM 1:4 complete all as specified and directed by Engineer-in-charge.
M&L for rendering 10-15 mm thick readymade plaster on inner/outer walls with approved make by adding 17-19% of potable water by weight of material. For thickness above 15mm is recommended to be applied in multiple layers, Ready-mix plaster shall complies with IS-1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 Days-10-12 Mpa/ Bulk density 1500-1800 Kg/m3 complete all as specified and directed by Engineer-in-charge. Note : The quoted rate by the contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 mtr height.
S&F Jaisalmer type traditional chattri base 300x300MM height 1.2 M including pillar majisa chajja kani and dome all itms fix in 1:4 CM with admixture complete all as specified and directed by Engineer-in-charge.
S&F Jaisalmer type traditional chattri base 600x600MM height 1.5 M including pillar majisa chajja kani and dome all itms fix in 1:4 CM with admixture complete all as specified and directed by Engineer-in-charge.
S&F Jaisalmer stone sign board/ name plate/unit info board with embossed in CNC machinr cut tradition pattern with side piller fixing having carving fixed in PCC complete all as specified and directed by Engineer-in-charge.
M & L Jaisalmer stone fully dressed sarph edge fixed in any position in cement mortar 1:4 and making ready for fixing of any article complete all as specified and directed by Engineer-in-charge.
SHISHODIA ENTERPRISES (BID ID -3458477)
M/s. Shiva Engineers (BID ID -3458201)
SINGH ENTERPRISES (BID ID -3458118)
Jasraj & Company (BID ID -3458133)
S AND A ENGINEERS CONSTRUCTION CO (BID ID -3458028)
BHAGWATI CONSTRUCTION (BID ID -3458317)
SHIVA CONSTRUCTION COMPANY (BID ID -3458367)
P VENKATA RAO (BID ID -3452887)
MURALI KRISHNA ASSOCIATES (BID ID -3457294)
BHAWANI CONSTRUCTION COMPANY (BID ID -3458362)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.17 MB
BOQ_819293.xls
BOQ • 2.41 MB
TenderDocuments8526.pdf
Tender Documents • 1.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .