TOUSS2526100155-Reconstruction of Departmental Huts in Pahalgam to be used for Yatra Upgradation Renovation of Departmental Hut at Pahalgam Civil Work ,Sanitary and Furnishing

Amount

TOUSS2526100155-Reconstruction of Departmental Huts in Pahalgam to be used for Yatra(Upgradation & Renovation of Departmental Hut at Pahalgam (Civil Work & Sanitary and Furnishing))

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below.( for details refer to Annexure A)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: ( for details refer to Annexure A)

P/Laying of Nallah stone soling, handpacked in bed incl. all carriages complete ( for details refer to Annexure A)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:4:8 (1Cement: 4 fine sand: 8 graded slone aggregate 40mm nominal Size), including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of materials

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing factory made uPVC white colour Fixed glazed & wire guaze windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),uPVC extruded glazing beads of appropriate imension, EPDM gasket,G.I fasteners 100 x8 mm size for fixing frame to finished wall,plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge.(Single / double glass panes and silicon sealant shall be paid separately).ENCRAFT,FENESTA, NCL VEKA, DECEUNINCK, ALUPLAST

Providing and fixing of 4 mm thick glass panes including Beading & necessary nails, complete job

Providing and fixing wooden panelling over all hieghts of walls , including cost of necessary adhesive cost of nails , skirting chair rails, cornice And Polishing (which contains the following works Sand Papering , sealer & Touch wood one or more coats with spray gun complete job. etc. as per directions of engineer in charge.

P/F of 12 mm thick plywood ceiling for soffits & Ceiling on woodwork in false ceiling, walls over whole area including cost of necessary adhesive &cost of nails etc. complete job.

Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining(veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement:2 marble dust) with an admixture of pigment to match the marble shade (To be secured tothe backing by means of cramps, which shall be paid for separately) 8.1.1.2 (Area of slab over 0.5 sqm)

P/L of 50 mm thick cement concrete flooring in 1:2:4 Mix finished with a floating coat of neat cement incl cement slurry using 20 mm crushed aggregates incl cariiage complete

Providing and applying lime putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

P/Fixing of Havells ventil air DSP 380 mm Exhaust fan including fixing & dismentalling of wall for the fixing of fan if required etc all complete job

Lighting point: One Lighting point shall incl, wiring for lighting points il 1.5 Sq.mm PVC insulated Copper wire & 2.5 Sq.mm PVC Insulate multi-strand Copper wire for lighting Sub- nains, 6 Amp one way swile 2 mm thick PVC conduit/Channel with bends, Junction boxes ele Amp S Pole MCB 10 Amp DP MCB, 2 way DB for Housing MCB an Hyle? Sheet with wooden bas recessed in walls with accessories

Providing and Fixing of Ceiling Lights

Providing and Fixing of Bulb 12 W

Fan point:-One Fan point shall incl, wiring for Lighting points in 1.5 Sqm PVC insulated Multi-Strand Copper wire 1200 non ceiling fan/225 mm exhaust fan with ceiling roses & PVC Square block, 350 Watts electronic fan dimmer,2 mm thick PVC conduit/Channel with bends, Junction baxes etc, 6, Amp S Pole MCB, 10 Amp DP MCB, 2 way DB for Housing MCB for lighting circuits and Hylem Sheet with wooden box recessed in walls with accessories

providing and fixing of Campton Energion Ceiling Fan

Heating Point:-Heating point One Heating point shall incl, wiring for heating points in 2.5 Sq mm PVC insulated Multi-Strand Copper wire & 4 Sq mm PVC insulated multi strand Copper wire for heating Sub-mains, 16 Amp switch socket combined, 2 mm thick PVC conduit/Channel with hends, Junction boxes ele, 10 Amp S Pole MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories

Charger point One Charger point shall incl, wiring in 1.5 Sq mm PVC insulated Multi-Strand Copper wire & 2.5 Sq mm PVC insulated multi strand Copper wire for heating Sub- mains, 16 Amp switch socket combined, 2 mm thick PVC conduit/Channel with hends, Junction boxes ele, 10 Amp S Pole MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories

Labour For Carrying the material from road up to site

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality jaquar conforming to IS : 8931

Providing and fixing 15 mm nominal bore CP Brass Single lever telephonic wall mixer of approved brand jaquar conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. Sink Mixer approved quality jaquar conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. Washbasin Mixer approved quality jaquar conforming to IS : 8932

Providing and fixing 15 mm nominal bore C.P. brass angle valve for of approved make conforming to IS : 8931

Providing and fixing Two way bib cock & faucet

Providing and fixing CP grating rectangular type with open circular lid

Providing and Fixing of standing washbasin of chinaware

Providing and fixing PTMT soap dish holder having length of 125mm, breadth 90 mm, height of 70 mm with concealed fitting arrangements, weighing not less than 96gms.

Providing and fixing PTMT Liquid soap container of 350 ml. capacity with concealed fitting arrangements etc complete job

Providing fixing of CP/ PVC tube connceting pipe with sink/basin/ flushing cistern and all other fitting accessories all complete job as per directions of site incharge

Providing and fixing on wall 50 LTRS Electric Geyser of approved brand Jaquar with ABS Body. Equivalent as Per Make List with necessary electric fittings & CPconnections etc all complete

Providing and fixing ball valve PPR of approved quality complete

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (1000 Ltrs)

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing uplasticized PVC connection pipe with brass unions. 45 cm long

P/L. of Nayasa funk square celuxe 3 pcs bathroom set bucket 25 L Mug 1.5 1. & Stool of approved colour & shade as per the site engineer etc all complete job

Providing and fixing of Wall to wall(Matting) of sizes

Providing and fixing of Therma cool of sizes

Supply, delivery, and installation of king-size bed made of solid seasoned wood ( Walnut ) with walnut polish finish, complete with two matching bedside tables and one high-quality 4-inch thick mattress (78" × 78") A) Bed Bed Frame (King Size) Overall size of bed (external): Minimum 82" (L) × 82" (W) × 40"–44" (H) (headboard height) Internal clear size for mattress: Exactly 78" × 78" Main frame and legs: 100% solid seasoned hardwood (Sheesham / Walnut or equivalent high-density hardwood). . Headboard: Solid wood, 2.5"–3" thick, designer panel or slatted pattern with walnut polished finish. Footboard: Solid wood, minimum 32 mm thick, same design language as headboard. Side rails & slats: Solid wood side rails (minimum 4" × 2" section) with centre support beam . Top surface (for mattress support): 19 mm thick commercial plywood (IS 303, BWR grade, ISI marked) fixed over the slats for uniform support. Finish: High-gloss or satin walnut melamine/polish (PU or melamine). All exposed wood surfaces to be smooth, knot-free, and properly seasoned (moisture content ≤ 12%). All edges rounded and polished; no sharp corners. Legs: Solid wood, minimum 4" × 4" with PVC/nylo buffers at bottom. B). Bedside Tables (Two numbers ) Size: Approx. 20"–22" (W) × 16"–18" (D) × 22"–24" (H) Body: Entirely solid wood matching design (same species as bed). Storage: One cupboard with hinged door + one drawer per bedside table. Drawer: Box made of 12 mm plywood with 6 mm plywood bottom, running on good-quality telescopic ball-bearing channels (Hettich / Ebco / Godrej or equivalent). Handles: Solid brass or SS brushed finish (minimum 96 mm). Finish: Identical walnut polish to match bed exactly. C). Mattress Mattress shall be made of rebonded (bonded) foam of minimum density 90 kg/m³ (±5%) tested as per IS 7888 or from NABL-accredited laboratory. Thickness 4 inch (±¼ inch), size 78" × 78". Core shall be single-piece rebonded block (no layers). Cover shall be quilted poly-cotton/rexin (minimum 300 GSM) with zipper all around for easy removal and washing, anti-bacterial & anti-dust-mite treatment. Warranty minimum 7 years against sagging more than 15%. Brands like Sleepwell (Rebond Plus), Nilkamal, Zuari, or equivalent accepted. All solid wood must be kiln-seasoned and chemically treated (anti-termite & anti-borer) Mattress must conform to IS 14496 or equivalent. Minimum warranty: Bed frame & bedside tables: 5 years against manufacturing defects Mattress: 7 years

SITC of Steel locker 7 ft. height

SITC of 200W LED Flood Light – Ip66 Waterproof LED Lights with 120° Wide Beam Halogen Light, Focus LED Lamp Light for Yard of Philips/Havelis/Crompton etc. make.

Finishing walls (inner & outer walls) with textured exterior paint of required shade on Old/New work (two or more coats applied @ 4.28 litter/10sqm) over and including base coat of exterior primer applied @ 3.20kg/10sqm

SITC of Standard Table of Size 4x 2.5 feet

SITC of Door Curtains (4x8) feet

SITC of Window Curtains (7x6.6) feet

SITC of Window Curtains (3x4) feet

SITC of Steel Rods for Curtains

Brackets for holding the steel rods of standard make

YASIR ALTAF VAID (BID ID -2688069)

NASIR HUSSAIN SHAH (BID ID -2687040)