For construction of foundation platform of 01 nos. distribution transformer and primary controlling of VCB switches and shifting of transformers and VCBs on plat form with gravelling work at near asnapani colony switch yard, MRS office switch yard,

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed Ordinary 2.25M X 2.25 M X 0.5 m X 1 Nos.(Transformer) = 2.53 cum 2.5 M X 1.25 M X 0.5M X 2 Nos (VCB)= 3.125 cum

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete 2.25 M X 2.25 M X 0.075 m X 1 Nos.(Transformer) = 0.38 cum 2.5 M X 1.10 M X 0.075M X 2 Nos (VCB)=0.41 cum Total=0.79 cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size) 2.20 M X 2.20M X1.10M X1Nos (Transformer) =5.32 cum 2.20M X 1.10M X 1.0M X 2 Nos(VCB) = 4.84 cum Total =10.16 cum

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. (2.25M X1.15M X 2 NOS) X2 nos for 1 no (Transformer) =10.35 Sqm (2.5 MX 1.0 M X 2 nos + 1.25 MX 1.0 M X 2 nos)=7.5 sqm for 2 nos VCB

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 11KV grade of following size direct in ground including excavation ,sand cushioning, protective covering and refilling the trench etc as required.Above 70sqmm and upto 120sqmm (Departmental supply)

1.0 MVA Transformer & 2 NOS VCB shiffting with Hiring of Hydraulic Jack lifter set M.S rail 90LBS ceiling D-link chain pulley and other acessories for shifting of distribution transformer and controling VCB switch upto 50mtr distance range

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. as required. For three number transformer power control switch 200 A, 25 KA,TP MCCB

Earthing with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set. for three number transformers earth continuity.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade For asnapani colony near gate (15 mtrx 4 nos x1.2 mtr )=72 sqmtr + MRS Office campus (10mtrx 4 nos x1.2 mtr )=48 sqmtr and near CPP gate switch yard (15mtr x2 nosx 1.2mtr +20m x2 nosx 1.2 mtr )=84 sqmtr Total =204 sqmtr