REPAIR/ MAINT TO LEAKAGE, SEEPAGE, JOINERY, PLUMBING AND OTHER B/R WORKS TO BLDG NO O-12, SM-82, O-16, C-1, C-2, C-3 AND OTHER CONNECTED BLDGS UNDER GE (FW) KOLKATA

Amount

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. incl necessary formwork complete all as specified and directed.

Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as specified and directed.

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as specified and directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and directed.

Taking down shutters any description exc 1.0 but not exc. 2.0 sqm each and refixing in the same opening after necessary repair like easing etc., complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick, on fair faces of brick or concrete surfaces of walls in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L 5 mm thick rendering on ceiling surfaces in cement mortar 1:3, finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed

S&F Vitrified coloured (light shade) Ceramic tiles, 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 20mm thick in cement mortar 1:6 complete all as specified and directed.

S&F Non-skid ceramic coloured tiles (square/ rectangular), minimum 7mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed.

S&F glazed coloured ceramic tiles in vertical surface, as per approved design, size 300 X 450 X 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, laid over and incl 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M&L 18-20mm thick granite slab in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in cement mortar 1:4 all as specified and as directed.

M&L for edge moulding of grainite slab edges, cutting, grinding including polishing to the required shape, complete all as specified and as directed.

M&L for italian marble (of any type) work (table rubbed and polished) for Flooring 20mm thick in cement mortar (1:3) and fixed with 5 mm thick spacers and gap to be filled by epoxy dazzling grout( with includes 2 component resin and hardner mixed in ration 1:4 and dazzel per 200 gms for 1 kg grout mixturepointing with match with shade of Marble), complete all as specified and as directed.

M&L 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hard wood panelled shutters (any Nos of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers, fitted to chowkhats complete all as specified and directed.

S&F factory made 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour wood grain PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced with MS square tube, in opening as per specification & drg as per manufacturer instructions, complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 100 mm x 45mm made out of 5mm plain colour PVC sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 guage throughout the frame, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Paneling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed.

S&F for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F stainless steel wire cloth of 0.65mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4 mm thick tinted/frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 5.5 mm thick tinted/frosted sheet glass ordinary quality and glazing with aluminium beads (beading included with shutters) in square exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F Solar control film 25 micron reflective type (garware sun control or equivalent), complete all as specified and directed.

S&F Solar control film 50 micron reflective type (garware sun control or equivalent), complete all as specified and directed.

S&F 10mm thick toughened glass as in hinge doors, partitions, windows, automatic doors and similar works including cutting to shape, drilling holes as required complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.

S&F 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.

S&F 150 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.

S&F 125 mm long aluminium anodised handles (cast type) ISI marked complete all as specified and directed.

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.

S&F double action floor door spring hydraulically regulated made up of minimum alloy steel foundation box main body with stainless steel covergovering pirot made of brass other part of MS heavy duty and fixed as directed by the Engr-in-charge.

S&F 200 mm long Brass finished anodised tower bolts extruded section, ISI marked complete all as specified and directed.

S&F 150 mm long Brass finished anodised tower bolts extruded section, ISI marked complete all as specified and directed.

S&F 250 mm long Brass Finish decorative type sliding door bolt with hasp staple (bolt type) and fixing clip of shut cast or extruded section and fixing bolts and sliding bolts of extruded section, complete all as specified and directed.

S&F in repairs Classic Cylindrical lock made of brass (Make: Godrej Cat No,3791 or Equivalent as approved by GE),complete all as specified and directed.,

S&F in repairs aluminium (extruded section body) hydraulically door closer universal type designation No 3 suitable for door shutter of weight between 61 to 80 Kg fixed in repair including taking down old fitting complete all as specified and directed.

S&F in repair powder coated (medium thickness of powder coating 50 micron) aluminium frame for door, windows, partitions and ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 Nos in each door, hinges, Mortice lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc as per manufactures instruction complete all as specified. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle, mortise lock etc as described in item. Sheet glass shall be measured seperately)

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as suitable 150 mm long peg stays (01 No), hinges type B-21 100 mm long (02 Nos), suitable handle-01No each shutter etc as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate is deemed to be inclusive of the cost of include for anodised aluminium hard ware as indicated, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames, handle etc as described in item. Sheet glass shall be measured seperately)

S&F in repair anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.

Removing carefully of aluminium doors, partitions and glass partitions and disconnect all members and re- fixing in the same position and same opening after repairs of floors, complete all as directed by Engr-in-Charge.

S&F 25mm dia brass decorative type curtain rod alongwith and supports and rings at a gap of 4"(Make:Vista Sher wood) glass fixed with necessary beadings, complete all as specified and directed. (NOTE: Brackets will be measured and paid seperately)

Supply and fixing Brass decorative brackets for curtain rod decorative type fixed as in repair complete all as specified and as directed.

M&L for french polishing on wooden surfaces of any description, any width or girth, including cleaning and preparing the surfaces including a coat of wood filler on new works with two or more coats, complete all as specified and as directed.

Dismantling carefully serviceable/unserviceable wall and ceiling boards (fibre pulp, insulation etc.,) or insulation boards/slabs any thickness incl cover fillets at any height, complete all as specified and directed.

S&F 10 to 12mm thick gypsum board false ceiling including 0.55mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspendded form the soffit of roof slab/truss @ 1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fastener with and including necessary nuts and bolts and gypsum board is screwed to ceiling section with stainless steel screws @ 230mm c/c and applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces, complete all as specified and directed.

S&F Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per anufacturer's instructions, complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap 30 mm, complete all as specified and directed.

S&F stain less steel handel 150 mm long decorative type, complete all as specified and directed.

S&F multi purpose cupboard lock make godrej, complete all as specified and directed.

S&F cupboard magnets heavey duty, complete all as specified and directed.

S&F Stain less steel tower bolt 120 mm long, hevy duty, complete all as specified and directed.

S&F PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall panelling inclusive of fixing as in grid / frame on wall at a distance 0.6m horizontal & vertical for wall lining/panelling as per specification of manufacturer and as directed by the Engineer-in-Charge.

S&F PVC solid wall lining consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction) complete all as specified and directed.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster complete all as specified and as directed

M&L Mild steel framed work such as grills of ornamental type, gratings, etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works incl portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc confirming to grade Fe-290. Gde-E-165, complete all as specified and directed.

M & L for cutting holes in brick walls in cement mortar for inserting holdfast or pipes and making good dismentled portion in cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required, exc half brick but not exc one brick etc., complete all as specified and directed.

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.

M&L for brushing neat cement slurry with 2.75 Kg of cement per Sqm on roof complete all as specified and directed.

M & L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.

M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.

M&L for Providing Cement Concrete, type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding mixed with water proofing compound and the concrete surfaces is to be finished even and fair (without using extra cement) complete all as directed by Engineer - in - charge . (NOTE: WPC Shall be measured & paid separately)

M&L 10 mm thick screed bed or bedding layer in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.20 litre per sqm over APP membrane. (v) Sealing of all angles & abutments up stands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.

Supply only liquid Water Proofing Compound, conforming to IS and as approved, complete all as specified.

M&L for cleaning of outer surfaces of down take pipes, any type, treating minor leakages at joints, clearing of vegetation, scraping of algae growth with wire brush, chipping of damaged plaster at the joints (area not exc 0.50 sqm) and making good with cement mortar 1:4 duly mixed with water proofing compound @ 200 ml per 50 kg bag of cement and applying one coat of tartaric acid on dry finished plaster surface including necessary ladder/scaffolding complete all as specified and directed. (NOTE: Water Proofing Compound shall be measured and paid separately)

M&L for applying one coat of acrylic distemper to old decorated surfaces of walls, finished with rollers including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed.

M&L for applying one coat of acrylic distemper to old decorated surfaces of ceiling, finished with rollers including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) complete all as specified and as directed.

M&L for complete removal of existing treatment on walls including cleaning, watering to make the surface clean and free from dust etc., finishing the surface with 2 mm thick wall putty (in two layers) for smooth finish and applying two coats of plastic emulsion paint over a coat of alkali resistant primer with roller, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings including cleaning, watering to make the surface clean and free from dust etc., and applying two coats of plastic emulsion paint over a coat of alkali resistant primer with roller, complete all as specified and directed.

M&L Preparing old decorated surfaces of walls and applying one Coat of plastic emulsion paint of approved shade, complete all as specified and as directed.

M&L Preparing old decorated surfaces of ceilings and applying one Coat of plastic emulsion paint of approved shade, complete all as specified and as directed.

M&L for preparing old treated surfaces of walls by washing, rubbing down stopping to make the surface free from loose paint, algae formation, dust etc., and applying one coat of cement base paint, complete all as specified and as directed.

M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

M&L for preparation of old treated/painted surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying one coat of weather proof exterior emulsion paint of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.

M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by scrapping and removing treated surfaces with mechanical wall sander (having vacuum mechanism for suction) having minimum 1500 RPM, sanding pad of 80 grit size having 7"- 9" dia (as required) including cleaning, watering to make the surface clean and free from dust, for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

M&L for complete removal of existing treatment on old painted surfaces of walls and soffit of chajja, roof slab etc. by using high pressure jet washer including cleaning the surface by scrapping as required using emery paper, putty blade/scraper as applicable for removing loose paint, corrosion, algae formation etc., to make the surface clean and free from dust, for upto 4 storey height including necessary scaffolding, safety and protective measures complete all as specified and directed.

Note for item No 85 to 88. The all process of painting will be carried out of Manufacturer authorised representative only, Jet Water machine and Graco Spry painting Machine shall be borne by the contractor and also the contractor should provide adequate jet and Spray machines as per site requirement as directed by Eng-in-Charge.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed.

Taking up or down GI Steel Water Tubing including Connections and Fittings, Segregating Serviceable Pipes & Fittings, Stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed for the following size of pipes :-

15mm bore outer dia

20mm bore outer dia

25mm bore outer dia

Relaying/Re-fixing Galvanised Steel Tubing and Connections in New or Old Position (Serviceable Pipes and Fittings obtained from taking down item) after Cleaning both Inner and Outer Surfaces of Pipes by using of Wire Brush, fixed to walls and ceilings or laid in floors complete all as specified and as directed for the following size of pipes :-

15mm bore outer dia

20mm bore outer dia

25mm bore outer dia

Supply, Laying and testing Steel Water Tubing, Galvanised, ‘Medium Grade’ with all Fittings, laid in trenches or any other Situation, complete as all specified and directed for the following size of pipes :-

15mm bore outer dia

20mm bore outer dia

25mm bore outer dia

S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed. (Make : ESS ESS, Cat No: RO-101 / PRAYAG, Cat No: 6702 / Essco, Cat No: SQT-507KN / SOMANY, Model: ETHER)

S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: TM-102 / CERA, Cat No: F2003151 / JAQUAR, Cat No: FLR-5047N/ PARRYWARE, Cat No: G0604A1 / / PRAYAG, Cat No: 9306 /HINDWARE, Cat No: F280002SCP)

S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: TM-103C-203 / CERA, Cat No: F2003163 / JAQUAR, Cat No: FLR-5041N/ PARRYWARE, Cat No: G0634A1 / PRAYAG, Cat No: 9312 / HINDWARE, CAT No: F280003SCP)

S&F in repair chromium plated brass over head shower rose with arm, with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed. (Make : Essco, Cat No: ALE-536A & EOS-542N / ESS ESS, Cat No: SA-101 & OH-202 / PRAYAG, Cat No: BS-73 / SOMANY, Model: ETHER)

S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No : FUS-29273UPR / PARRYWARE, Cat No: G4816A1 / CERA, Cat No: F1003401 / ASIAN PAINTS, Cat No: ALWM103 / PRAYAG, Cat No: 9375-N / HINDWARE, Cat No: F390020)

S&F in repair 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS)

S&F in repair fancy type chromium plated telephonic hand shower (ABS Body), multiflow type with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : JAQUAR, Cat No: HSH-1939 / CERA, Cat No: F7030103AB / ASIAN PAINTS, Cat No: HS-104 / HINDWARE, Cat No: F160050 / PRAYAG, Cat No: BHS-90 /PARRYWARE, Cat No: T9819A1 )

S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : Ess Ess, Cat No: RO-332 & E-2211 / PRAYAG, Cat No: 6718 / / Essco, Cat No: SQT-514EKN /SOMANY, Model: ETHER)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make :ESS ESS, Cat No: RO-112 / PRAYAG, Cat No: 6710 / ESSCO, Cat No: SQT-526NKN / SOMANY, Model: ETHER)

S&F in repairs toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-706 / HINDWARE, Cat No: F880003)

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-702 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 )

S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232Y / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-703 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repairs 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : ACN-1131N / ESS ESS, Cat No: C-270 or equivalent model in PRAYAG/CERA /HINDWARE/PARRYWARE,)

S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12)

S&F in repair Special designed Acrylic shelf of size (56Cmx13Cm) with CP wall flange all as directed by Engineer-in-Charge (Make: ESS ESS, Cat No: AC-107 / PRAYAG, Cat No: BEA-45 or equivalent model in CERA /HINDWARE / PARRYWARE)

S&F in repair corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102/ ESS ESS, Cat No: AC-207A)

S&F in repair chromium plated thumbler holder with wall flange, complete all as specified and directed. (Make: ESS ESS, Cat No: AC-204 or Equivalent model in JAQUAR/CERA/PARRYWARE/PRAYAG)

S&F in repair Connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser, complete all as specified and directed. (Make: JAQUAR, Cat No: ALD-803AB or Equivalent model in ESS ESS / CERA/PARRYWARE/PRAYAG)

S&F in repair chromium plated 3mm thick robe hook (2 way) fixed to wall for hanging purpose, complete all as specified and directed. (Make: ESS ESS, Cat No: CA-106 or Equivalent model in JAQUAR/CERA/PARRYWARE/PRAYAG)

S&F in repairs, Tubular towel rail 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 )

S&F in repair Vitreous China table top Wash Basin 565 x 425 mm in size, White with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 complete all as specified and as directed. (MAKE : JAQUAR, Cat No: KUS-WHT-35935 / CERA, Model: CHEST / HINDWARE, Cat No. 91069 or equivalent model in PARRYWARE)

S&F in repair Vitreous China Wash Hand Basin wall hung with half pedestal of size 575mm x 465mmx 200mm, (white/coloured as approved), Flat Back or Angle Back Type, making good disturbed Surfaces in Cement Mortar 1:3, providing CP waste coupling and PVC waste pipe and connected Items, complete all as specified and directed. (Make of WHB : JAQUAR, Model:SLS-WHT-6801+SLS-WHT-6305 or Equivalent model in HINDWARE/ CERA/PARRYWARE) (NOTE: Quoted rate shall be deemed to be inclusive of the cost of brackets, waste coupling and waste pipe)

Supply and fix pressure booster pump with 1 HP 50-60 HZ,VOLTAGE 220V,single phase,discharge capacity 0-6 m3/hr,25 mm dia delivery pipe(of length 5.00 meter ) pressure switch of dynfos ,pressure dial gauge (ranging from 0 to 100 lbs per square inches) and testing on completion as in repair complete all as specified and as directed by Engineer-in-Charge. Make: crompton Greaves, model NO-10 Minimarket I-025 or Equivalent as approved by GE

S&F in repair vitreous china floor mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF / PARRYWARE, Model: Omega / HINDWARE, Model: SPELNDOUR)

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: ESS ESS, Cat No: C-231C / PRAYAG, Cat No: BEA-23 / ESSCO, Cat No: ALE-773ML190x125)

S&F in repair 10 ltrs capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)

Repair only to PVC flushing cistern incl cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed.

S&F in repair chromium plated brass waste coupling, 32 mm size, full threaded complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-11 / ESS ESS, Cat No: C-230C / ESSCO, Cat No: ALE-544NT)

S&F in repair 32mm CP Waste coupling (half threaded) complete all as specified and directed. (MAKE : PRAYAG, Cat No: BEA-10 / ESS ESS, Cat No: C-230H / ESSCO, Cat No: ALE-543HT)

S&F in repair 32mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F Coloured(any) PVC seat cover, suitable for EWC (of any description) fixed with mild steel chromium plated hinges as in repair, complete all as specified and as directe by Engineer-in-charge.MAKE:Parryware,cat no C 8071 or equivalent as approved by GE.

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed. (NOTE: GI long screw shall be measured and paid separately)

All as per item No 130 here-in-before, but 1000 ltrs capacity.

All as per item No 130 here-in-before, but 2000 ltrs capacity.

Disconnecting exiting water storage Tank of capacity exceeding 500 litres but not exceeding 1000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including supply and fixing of any damaged accessories for water Tank and writting MES No, Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10ms each tank ) and re-connecting and refixing all connections complete all as specified and directed.

All as per item No.133 above, but water storage tank of capacity exceeding 1000 litres but not exceeding 2000 liters

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 75mm bore PVC (SWR) pipes, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed by the Engineer-in-Charge.

Supply and Fixing 110 mm PVC (SWR) Bend any radius complete all as specified and as directed by the Engineer-in-charge.

Supply and Fixing 75 mm PVC (SWR) Bend any radius complete all as specified and as directed by the Engineer-in-charge.

Dismantling of old 100 mm bore cast iron (sand cast) soil, waste or RCC drain pipes, jointed in cement mortar and taking out from trenches, if required, complete all as specified and as directed.

Supply and fix 100 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed. (Note : Earthwork to be measured and paid separately).

Supply and fix 150 mm bore cast iron (sand cast) soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and as directed. (Note : Earthwork to be measured and paid separately).

S & F CI bend (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore pipe complete all as specified and directed.

S & F CI bend (any radius), with duck foot or heel rest for 100 mm bore pipe, complete all as specified and directed.

S & F CI (sand cast) Branch pieces, single (any radius, equal or unequal) ordinary or inverted (spigot or socket type) or with parell branches for 100 mm bore pipe for any building height complete all as specified and directed.

S & F CI (sand cast) Vent cowl t for 100 mm bore pipe, complete all as specified and directed.

DEB AND COMPANY

MUKHERJEE ENTERPRISE

JAGATMATA ENTERPRISE

BASU AND CO

UNITED ENGINEERS

M/S SHRI P K ACHARJEE

MARUTI ENTERPRISES

EAST COAST STANDARD PRODUCTS