REPAIR WORK OF EXHUST AHU AND PANEL WORK AT MANEKSHAW CENTRE UNDER GE (U) P AND M DELHI CANTT-10

Amount

1. M&L for disconnecting incoming/outgoing electric cable connection of 10 HP Electric motor installed inside Exhaust AHU.- 02 Each Job 2. M & L for Dismantling Exhaust AHU fan Motor of 10 HP and its blower assembly with all connected accessories from a height of 50 feet at manekshaw auditorium using all T&P required as directed by engineer in charge. - 02 Each Job 3. Material and labour for servicing of blower assembly unit including cleaning and checking aligning, Lath work and tightening of blower fan, greasing of all movable parts, replacement of worn out bolts, nuts shaft keys etc all as directed and specifed by engineer in charge- 02 Each Job 4. M & L for rewinding of existing unserviceable/defective motor of capacity 10 HP of any size, type, and make including disconnecting all electrical connections removing from foundation transporting to repair workshop disconnecting unserviceable burn out winding completely including insulating materials and rewinding of the complete stator with super enameled copper wire of existing size applying proper insulation ‘F’ class varnish drying in oven, assembling, transporting back to site, re-installating, testing and commissioning complete all as specified and as directed by Engineer-in-Charge. (Note :- Transportation Charges from site to trade workshop and back to original location after repair shall be deemed to be included in unit quoted rate.) - 02 Each Job 5. M & L for Repair to 10 HP motor including replacement of bearing and terminal plate with servicing and greasing as directed by engineer in charge - 02 Each Job 6. M & L for refixing of Exhaust AHU fan Motor of 10 HP and its blower assembly with all connected accessories to a height of 50 feet using all T&P required as directed by engineer in charge - 02 Each Job 7. S & F in replacement of three pole power contactors of capacity ML-3 including control wiring, thimbles, etc complete all as specified and as directed by Engr-in-Charge. (Make -L&T/Siemens/Legrand/ ABB/ C & S.) - 04 Each 8. Material and labour for serving of AHU Control panel panel including removing the carbonized/melted sparked thimbles, cleaning the carbonized bus bar making cable ends fresh and supply and crimping new thimbles/lugs and fixing the cable on bus bar/MCCB/Main switch/MCB including providing new nut bolts and washer if required greasing the doors of feeder pillar/LT panel outdoor/indoor type complete all as specified & directed by Engr-in-Charge - 02 Each Job 9. Testing & Commissioning of Complete Exhaust AHU at full load inclusive of fixing/ alignment of motor complete in all respect as per direction of Engineer-In-charge 02 Each Job

Ashok Enterprises

Nakul Enterprises

Tushar Enterprises

SHIVAM ENTERPRISES