Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District.

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. (Civil) (GF)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, bas...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportat...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- Complete with all lead and lift loading and unloading charges etc., work should ...

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., w...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be...

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 m...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off cor...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corn...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- Com...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mo...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougl...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requir...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., work...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. (Civil - FF)

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- Complete with all lead and lift loading and unloading charges etc., work should ...

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., w...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be...

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 m...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off cor...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corn...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specific...

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. ---- Com...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mo...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterio...

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly...

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougl...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever requir...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., work...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. (Civil- TF)

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface/ ceiling including rounding off corners wherever required smooth rend...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. water supply GF

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines

---- Complete with all lead and lift loading and un...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines

---- Complete with all lead and lift loading and un...

PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in...

PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Enginee...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expan...

Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by applicatio...

Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Spe...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

---- Complete with all lead and lift loading and unloading char...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

---- Complete with all lead and lift loading and unloading charges etc., w...

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equal...

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complet...

Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standa...

Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets, supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed draw...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not ...

Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not ...

Brass bib-cock 15 mm dia

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overf...

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. WATER SUPPLY FF

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines

---- Complete with all lead and lift loading and un...

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40mm dia pipes, From wash basin waste lines

---- Complete with all lead and lift loading and un...

PVC pipe - OD 75mm and 6 Kg/sqcm, waste lines

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in...

PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Enginee...

Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by applicatio...

Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape: oval of ISI or BIS Standards.complete as directed by the Engineer in charge. (Market Rate)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Spe...

Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

---- Complete with all lead and lift loading and unloading char...

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.

---- Complete with all lead and lift loading and unloading charges etc., w...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equal...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standa...

Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Brass bib-cock 15 mm dia

---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. ELECTRCAL

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2 x 1.5Sqmm (Phase and Neutral) and 1 x 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copp...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall1...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall ...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall ...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall ...

Supplying and flush mounting powder coated galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in BrickStoneC.C wall ...

Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing m...

Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing m...

Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing m...

Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing m...

Supplying and fix ing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc complete on the existing m...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch ---- Complete with all lead and lift loading and unl...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps two way Switch ---- Complete with all lead and lift loading and unl...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket ---- Complete with all lead and lift loading and unload...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator. ---- Complete with all lead and lift loading and u...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps Bell push ---- Complete with all lead and lift loading and unloadin...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32AmpsDP switch ---- Complete with all lead and lift loading and unloadin...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 616Amps universal socket ---- Complete with all lead and lift loading and...

Supplying and fix ing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293.TVTelephone socket ---- Complete with all lead and lift loading and unload...

Supplying and fixing one of 230 volts Dinf dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with remote. Ding Dong bell ---- Complete with all...

Supplying and fixing Metal Fan Box with round hook ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Enginee...

Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, meta lPVC junction box es adhesive paste etc and running before concreting the slab. The condui...

Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc and running before concreting the slab. The conduit...

Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U o...

Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, metalPVC junction box es adhesive paste etc by groove cutting in wall and fix ing by bracing U o...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS6...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS6...

Wiring for lightingpower circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS6...

Supplying and fixing regular MCB distribution boards on wall wood board I flush mounting using required clamps,i bolts, nuts etc with provision for fix ing suitable type capacity MCB s si...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short cir...

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240450V up to 300mA sensitivity on existing woodpanel board 16 to 25 Amps 2 pole ---- Complete with all lead and lift...

Supplying, drawing flexible multicore cable manufactured with electrlytic grade flexible copper with low condutor confirming to IS 8130-1984 and (Virgin) PVC Insulation sheated suitable for working vo...

Supplying, fixing wiring earth electrode for grounding conduits I.C cut out and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pit...

Supplying, fix ing wiring earth electrode for grounding conduits I.C cut out and other equipment s on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5 m long buried in a pit The pi...

Supplying of recess mounting non integrated type LED down light 12 to 10 W luminaire comprising of pressure decast extruded aluminium housing with spring loaded false ceiling clA LED of Power or COB...

Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life...

Supplying & fixing of retrofit type - LED bulb 7W,6500k with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI greater then 70percent. efficacy greater then 80 lumen per W life...

Supplying & Fixing of Special Type pigmy and candle lamp. Operating voltage range from 180V to 265V, 50Hz AC power Supply ---- Complete with all lead and lift loading and unloading charges etc., work ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying e x haust fan of 1440 RPM of 300mm (12 PERCENT) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. ---- Complete with all lead and lift loading and...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS3741979 and with double ball b...

fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fix ing 5 A. ceiling rose, necessary ...

fix ing one e x haust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling ros...

Supplying and fix ing telescopic M.S. bracket fabricated by using 0.5m length 4dia telescopic M. S. pipe, with 2dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sh...

fix ing halogenmetal halide SVL IL LED floodlight fitting over existing pole wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. ---- Complete with all lead and li...

Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, ...

Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenoliciFRPDMC insulator ...

Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red o x ide and then two coats of approved paint ...

Supplying and fix ing angle iron frame work iabricated out of M.S. angle ironand M.S. flat with bolts, washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50 ...

Supplying and fixing mouldedd case circuit breajers (MCCB) over the exisiting wood or panel board using necessary screw boilts nuts and wiring complete. Protection of overload and short circuit t...

Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross3 with Short ci...

Supplying and fix ing miniature circuit breakers on existing MCB distribution boards using necessary fix ing materials and C Type curve, indicator ONOFF, energy cross 3 with Short c...

Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- Complete with all lead and lift loading and unloading charges...

Supplying and fixing porceliain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63A ---- Complete with all lead and lift loading and unloading charges ...

Supplying of on load change over switches 4 poles, AC of 23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) upto 63 A ---- Complete with all lead and lift load...

Supplying, fixing and wiring rotary selector switch suitable for Ammeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification an...

Supplying, fixing and wiring rotary selector switch suitable for Voltmeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification ...

Supplying, fixing and wiring 3 Phase Digital Ammeter Voltmeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and directi...

Supplying and fixing of LED type panel board indicating

lamp with required colour suitable for 230440VAC. 50 Hz

1224V D.C. ---- Complete with all lead and lift loading and unloading charges etc., work...

Supplying, fixing and wiring 505 to 4005A 5VA burden

Current Transformer Class 0.5 accuracy with Tape Wound. ---- Complete with all lead and lift loading and unloading charges etc., work should be car...

Supplying, fixing and wiring Electronic Trivector Meter ETV5

to 20A single phase Class-1 Accuracy with Temper Proof

Energy Meter. ---- Complete with all lead and lift loading and unloading charges etc...

Construction of Health wellness centre at Nagenahalli in Harihara Taluk, Davanagere District. (DISMANTILING)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(P...

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate ...

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engin...

Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum. Tipper 5.5 cum ---- Complete with all lead and lift loading and unloading charges etc., work should be carried o...