SPECIAL REPAIRS TO BLDG NO P-137 AGE I RND OFFICE AVADI AT CVRDE AVADI

Amount

Demolishing cement concrete (unreinforced) in manually/by mechanical means, including removal of old tarfelt, plastering, concrete mugs, tiles, tree roots etc to disposal of material within 500 metres lead complete all as specified and directed.

M&L for Providing and laying as levelling course on roof 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) with water proofing compound @ 2% of cement weight complete all as specified and directed. Note:- WPC will be measured and paid seperately under relavent item of BOQ.

Material and labour for roof treatment as follows :- (a) Material and labour chipout the existing loosed bitumen/Bitumen membrane completley reachup mother slab, clean the surface throughly to make it smooth and clean of any foreign materials, repair the concrete wherever damaged using PMM HS repair, repairing of constructions/craks/chasing with machine and filled the same with polymerised motor in HS repair, Chopping of 75x75mm should be made of the junction of walland raft slab using polymerised cement Mortar 1:4 and mixed with advance latex plus . (b) Applying one coat of 50% diluted self priming PU roof coat. Allow to dry priming coat for 4 to 6 hrs before applying PU coats and surface to be cleaned before applying PU coats. (c) Applying two coats of single components cold applied, water based Poly urithene modified acrylic dispersion with highly elastic and UV registant water proofing treatment to the roof with HS PU roof coat of berger of equivalent at 0.6kg/Sqm for each coat without dilusion confirming to ASTM D 6083-97a (Standard specification for liquid applied acrylic coating using in roofing) each coat should allow to dry 4 to 6 hrs the components shall have a density of 1.5 ot 1.3 kg/Ltrs, having tensile strength of 1.5 N/Sqmm, having elongation of 350% with solid content not less 60% in two coats. SRI value should be more than 100.

The coated rate shall include surface preparation, repair the cracks in mother slab by chasing with cutting machine and filled the same with-polymerized mortar in CM 1:4 admixed with latex agent of reputed manufactureer's, making coving at junction, bore packing, treatment of construction joints completely as per manufacturer's specification and direction of the Engineer -in-Charge. (d) PU roof treatment work shall be got executed through authorised applicator of chemical manufacturer as approved by the AGE(I). Before commencing the work on ground, the documentary proof to this effect shall be submitted for veification, prior to claiming the payments in RARs/FB.

Supply only integral water proofing compound complete all as specified and directed.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material built in cement mortar and disposal of unserviceable material complete all as specified and directed.

M&L for Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 (1 cement : 6 Coarse sand) complete all as specified and directed.

M&L for providing and laying PCC 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing complete all as specified and directed.

Taking down old plaster or skirting raking out joints and cleaning the surface for plaster includng disposal of rubbish to the dumping ground within 50 metre lead complete all as specified and directed.

M&L for rendering in CM 1:4, 15mm thick on external surfaces of concrete and brick masonry using water proofing compound @ 3% by the weight of cement and finished the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC will be measured and paid seperately under relavent item of BOQ.

M&L for rendering 12 mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth in fine sand complete all as specified and directed.

M&L for 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on ceiling surface finished with a floating coat of neat cement and thick coat of lime wash on top of ceiling when dry for bearing of RCC slabs and beams complete all as specified and directed.

M&L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour with two coats on new plastered surfaces of wall complete, as per manufacturer's specification over and including 2mm thick internal wall care putty finish complete all as specified and directed.

M&L for applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete all as specified and directed.

M&L for finishing new plastered wall surfaces ( Two coats applied @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm with 100 % premium acrylic weather proof exterior emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives complete all as specified and directed.

M&L for white washing on new work (two coats) with lime to give an even shade complete all as specified and directed.

M&L for one coat of white wash on new work with lime to give an even shade complete all as specified and directed.

Removing white, colour wash and existing treatment by scrapping and sand papering and preparing the surface smooth incluidng necessary repairs to scratches etc complete all as specified and directed.

M&L for one coat of white washing on old wall / ceiling surface with lime to give an even shade complete all as specified and directed.

Removing dry or oil bound distemper, water prooofing cement paint and the like by scrapping , sand papering and preparing the surface smooth including necessary repairs to scratches etc complete all as specified and directed.

M&L for finishing wall with weather proof exterior emulsion paint on old/new work ( two or more coats applied @ 1.67 ltr/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 kg/ 10 Sqm of required shade complete all as specified and directed.

M&L for distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade and colour with two or more coats on old work complete, as per manufacturer's specification over and including 2mm thick internal wall care putty finish complete all as specified and directed.

M&L for two coats including preparation of old wooden surfaces and Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade complete all as specified and directed.

M&L for two coats of French polishing to existing wooden surfaces including preparation of surfaces complete all as specified and directed.

M&L for providing and fixing on wall face unplasticised Rigid Single socketed 75mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including dismantling old CI or asbestos rain water pipe with fittigns and clamps, complete all as specified and directed. complete all as specified and directed.

M&L for providing and fixing on wall face unplasticised Rigid Single socketed 110 mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including dismantling old CI or asbestos rain water pipe with fittigns and clamps, complete all as specified and directed. complete all as specified and directed.

M&L for providing and fixing 110 mm dia Coupler on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and directed.

All as per ser item No 26 above but bend 110 mm dia complete all as specified and directed.

All as per ser item No 26 above but shoe (Plain) 110 mm dia complete all as specified and directed.

All as per ser item No 26 above but110x110x110 mm single tee with door complete all as specified and directed.

All as per ser item No 26 above but Coupler 75 mm dia complete all as specified and directed.

All as per ser item No 26 above but bend 75 mm dia complete all as specified and directed.

All as per ser item No 26 above but shoe (Plain) 75 mm dia complete all as specified and directed.

All as per ser item No 26 above but Single tee with door 75x75x75 mm dia complete all as specified and directed.

M&L for providing and fixing G.I. Pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including taking down the 15 mm dia GI pipe complete all as specified and directed.

M&L for providing and fixing G.I. Pipes 20 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including taking down the 20 mm dia GI pipe complete all as specified and directed.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed.

M&L for providing and placing on terrace ( at all floor levels) triple layered polyethylene water storage tank, 500 ltr capacity Is: 12701 marked, with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete all as specified and directed.

M&L for providing and fixing 20 mm nominal bore, 120 mm long, weighing not less than 198 gms PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball complete all as specified and directed.

M&L for PCC with 1:2:4 type B1 of using 20mm graded aggregate laid as levelling course complete all as specified and directed.

M&L for providing and laying 10mm thick Vitrified tiles double charged polished finish of size 600mm x 600mm as in floors with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

M&L for providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick rendering of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

Dismantling wooden boardings in lining of walls Up to 10 mm thick and partitions, excluding supporting members but including stacking within 50 metres lead complete all as specified and directed.

M&L for providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38mm of length 3000 mm, cross - T of size 24x32 mm of length1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items (galvanizing@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm fastener if require,fixed with Glavanised iron perimeter wall angle or size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws With 15 mm thick tegular / butt edged without perforation plain / designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21, complete all as specified and directed.

M&L for providing & fixing White vitreous china water closet squatting pan Orissa pattern W.C Pan of size 580x440 mm (Indian type) along with "S" or "P" trap 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, in repairs complete all as per the direction of Engineer-in charge.

M&L for providing and fixing white vitreous china pedestal type W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures in repairs including cutting and making good the walls and floors wherever required complete all as specified and directed.

M&L for providing and fixing white vitreous china flat back single half stall urinal of size 580 x 380 x 350mm with white PVC automatic flushing cistern, with fittings, standard size CP brass flush pipe , spreaders with unions and clamps ( all in CP brass) with waste fittings as per IS : 2556, CI trap with outlet gratings and other couplings in CP brass includng painting to fittings and cutting and making good the walls and floors wherever required including dismantaling the old urinal, complete all as specified and directed.

M&L for providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989 complete all as specified and directed.

M&L for providing and fixing White vitreous china flat back wash basin size 550 x 400mm with single 15mm CP brass pillar tap, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, in repairs, complete all as specified and directed.

M&L for providing and fixing C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931 complete all as specified and directed.

S&F in repair two way bib cock 15mm bore chromium plated fancy type complete all as specified and as directed.

S&F in repairs C.P. Brass stop cock (concealed) 15 mm dia long shank screwed both side for iron pipe or for union and fixed complete all as specified and directed.

M&L for providing and fixing C.P. brass angle valve 15mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931, in repairs, complete all as specified and directed.

M&L for providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality complete all as specified and directed.

M&L for providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm (outer dimensions), including taking down, complete all as specified and directed.

M&L for providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour 600mm long, in repairs, complete all as specified and directed.

M&L for providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required with Kitchen sink with drain board 510x1040 mm bowl depth 200 mm, in repairs, complete all as specified and directed.

M&L for providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length and 15 mm dia nominal bore, in repairs, complete all as specified and directed

S&F C.P. brass toilet paper holder, in repairs, complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete of area 3 sq. metres and below, complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel or wood) Of area 3 sq. metres and below, complete all as specified and directed.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. complete all as specified and directed.

M&L for providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of PCC type C1, 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete all as specified and directed.

M&L for providing and fixing panelling or panelling Second class teak wood and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for Panelled or panelled and glazed shutters 35 mm average thick and Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading complete all as specified and directed.

M&L for providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete all as specified and directed.

M&L for providing and fixing factory made panel PVC door shutter 30mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete all as specified and directed.

M&L for providing and fixing 200x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

All as per ser item No 66 above but 150x10mm complete all as specified and directed.

M&L for providing and fixing bright /matt finished Stainless Steel 125mm handles of approved quality & make with necessary screws etc complete all as specified and directed.

M&L for providing and fixing IS : 12817 marked stainless steel butt hinges (Size 100 x 58 x 1.90 mm) with stainless steel screws etc complete all as specified and directed.

M&L for providing and fixing 300x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete all as specified and directed.

M&L for providing and fixing aluminium Twin rubber stopper hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed.

M&L for providing and fixing fly proof stainless steel wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm With 12 mm mild steel U beading complete all as specified and directed.

M&L for providing and fixing powder coated aluminium door, window or ventilator shutters (minimum thickness of powder coating 50 micron) of including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required, complete all as specified and directed. Note:- Fittings shall be paid for separately under relavent item of BOQ.

M&L for providing and fixing aluminium work powder coated aluminium ( minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling CP brass/ stainless steel screws, complete all as specified and directed. Note:-Glazing, paneling and dash fasteners shall be paid for separately under relavent item of BOQ.

M&L for providing and fixing glazing With float glass panes of 4.00 mm thickness (weight not less than n 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete all as specified and directed.

M&L for providing and fixing glazing With float glass panes of 5.0 mm thickness (weight not less than 12.50 Kg/ Sqm) in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete all as specified and directed.

M&L for providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc complete all as specified and directed.

M&L for providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete all as specified and directed.

M&L for providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing with brass pivot and single piece M.S. sheet outer box with slide plate etc With stainless steel cover plate minimum 1.25 mm thickness complete all as specified and directed.

M&L for providing and fixing 12 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. complete all as specified and directed.

M&L for providing and fixing factory made uPVC white colour casement/ casement cum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed (Single / double glass panes and silicon sealant shall be paid separately.

Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable complete all as specified and directed.

All as per ser item No 81 above but Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension complete all as specified and directed. ( Area of window upto 2.50 sqm).

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

M&L for Steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level complete all as specified and directed.

M&L for reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.

M&L for centering and shuttering including strutting, propping etc. and removal of Formwork for Lintels, beams, plinth beams, girders, bressumers and cantilevers complete all as specified and directed.

Dismantling steel work manually/ by mechanical means in built up sections without dismembering, complete all as specified and directed.

M&L for providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. (Fixed to steel windows by welding) including priming coat with approved steel primer complete all as specified and directed.

M&L for painting on new steel surface (two coats ) incluidng a coat of approved steel primer (red oxide primer) with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade complete all as specified and directed.

M&L for making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20mm nominall size derived from natural sources) of 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing form work & finishing the top smooth complete all as specified and directed.

M&L for providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels of Granite stone slab colour black, Cherry/Ruby red area of slab over 0.50 sqm complete all as specified and directed.

S&F in repairs Venetian blinds of approved make vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc and necessary fittings complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

S&F lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet used instead of plain colour sheet duly fitted into the wall as per specifications, complete all as specified and directed.

Taking down old unserviceable copper/aluminium point wiring of light, fan, socket 5/15 Amps or power point complete including fittings such as switches, ceiling rose, pendrant, regulator, socket, lamp holder, brackets etc including switch boards and making good disturbed surfaces of walls/ceiling etc so as to match with the existing wall/ceiling/floors etc complete all as specified and directed.

Taking down old sub main wiring of any size including copper/aluminium/GI earth continuity conductor and making good disturbed surfaces complete all as specified and directed.

Taking down old unserviceable industrial type plug and socket with MCB SP of any capacity complete all as specified and directed.

Taking down old unserviceable MCB DBs including all MCB's/MCCB's of any sizes and capacities alongwith teak wood boards including all fittings/fixtures and making good disturbed surfaces complete all as specified and directed.

Taking down old unserviceable light fittings of any type and capacity complete all as specified and directed.

M&L for wiring for light point/ceiling fan point/ exhaust fan point/call bell point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit 20mm dia with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc complete all as specified and directed. (a) Group A

M&L for wiring for twin control light point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit 20mm dia with modular switch (2 way), modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc complete all as specified and directed.

Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/wooden block including connections etc complete all as specified and directed.

Supplying and fixing two module stepped type electronic fan regulator 120W, 240V on the existing modular plate switch box including connections but excluding modular plate etc complete all as specified and directed.

M&L for wiring for circuit/sub main wiring for switch socket combination 5A with 2 x 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit 25 mm dia alongwith 1 x 1.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing complete all as specified and directed (for 72 points). Note:- 3 runs of cable and one run of conduit shall be measured as one unit length.

M&L for wiring for circuit/sub main wiring for switch socket combination 15A with 2 x 2.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit 25 mm dia alongwith 1 x 2.5 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing complete all as specified and directed (for 20 points). Note:- 3 runs of cable and one run of conduit shall be measured as one unit length.

Supply and fixing 5/6 Amps modular switch on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed.

Supply and fixing 15/16 Amps modular switch on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed.

Supply and fixing 3 Pin 5/6 Amps modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed.

Supply and fixing 6 Pin 15/16 Amps modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed.

Supply and fixing 3 module (100 mm x 75mm) GI box alongwith modular base & cover plate for modular switches in recess etc complete all as specified and directed.

M&L for wiring for circuit/sub main wiring with 2 x 4.0 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit 25mm dia alongwith 1 x 4.0 sqmm FRLS PVC insulated copper conductor single core cable for loop earthing complete all as specified and directed (for 20 points). Note:- 3 runs of cable and one run of conduit shall be measured as one unit length.

Supply and fixing 20 Amps, 230 volts SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alongwith 20 Amps "C" curve SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc complete all as specified and directed.

Supplying and fixing 6 way (4+18) surface/recess mounting vertical type 3 pole and neutral, sheet steel, MCB distribution board of sheet steel dust protected duly powder painted inclusive of 200 Amps tinned copper bus bar common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer) complete all as specified and directed.

M&L for providing and fixing 63 Amps MCCB 4 pole 25 KA with thermomagnetic release and terminal spreaders in existing cubicle panel/distribution boards including drilling holes and making necessary fixing arrangements, connection and testing etc, complete all as specified and directed.

Supplying and fixing MCB single pole (SP) 5 Amps to 32 Amps rating 240 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB with connections, testing and commissioning complete all as specified and directed.

M&L for wiring for circuit/sub main wiring alongwith earth wire with the 4 x 6.0 sqmm + 2 x 6.0 sqmm earth wire of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit of suitable size as required. Note:-6 runs of cable and one run of conduit shall be measured as one unit length.

Supply and fixing indoor LED tube light fittings including tube 20 watt LED and fixed with wall surface,box type with anodised extruded aluminium housing, integrated with suitable electronic LED drive and high lumen output, connecting with 3 core flexible copper cable PVC insulated of suitable size of sufficient length including miscellaneous items required at site complete all as specified and directed.

Supply and fixing indoor LED luminaires aesthetically for false ceiling for any type designed 2' x 2' flat panel for recessed mounting which provides soft light and glare free symmetrical illumination suitable for recessed mounting type complete 36W LED complete with driver and fixing arrangement and connected from ceiling rose to LED fitting suitable size PVC insulated copper cable complete all as specified and directed.

Supply and fixing indoor LED luminaires down lighter luminaire any type designed 2' x 2' for recessed mounting which provides soft light and glare free symmetrical illumination suitable for recessed mounting type complete 36W LED complete with driver and fixing arrangement and connected from ceiling rose to LED fitting suitable size PVC insulated copper cable complete all as specified and directed.

Supply and fix indoor LED luminaires 1 x 9 W LED basic all purpose surface and wall mounted type LED batten with polycarbonate housing and integrated electronic drive & integrated electronic drive complete with fixing arrangement and connection from ceiling rose to LED fitting suitable size PVC insulated copper cable complete all as specified and directed.

Supply and fixing PVC conduit medium grade of size 20mm alongwith accessories in surface/recess including cutting the wall and making good the same in caseof recessed conduit complete all as specified and directed.

Supply and fix cat 6 Ethernet cable high speed 550 MHz/10 GB speed UTP LAN cable, network cable, internet cable, RJ 45 cable, LAN wire, path computer cord, Giga bit category wires including necessary connectors etc for modem/router complete all as specified and directed.

Supply and fix RJ-45 jack with CAT 6 computer/data transfer socket modular type etc complete all as specified and directed.

M&L for Earthing complete with galavanised steel plate electrode 600x600x6 mm thick buried directly in ground vertically ( earth pit to a depth of not less than 2.7 metre deep below ground level) with the top edge of earth place at a depth of not less than 1.5 metre below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nuts, washers of galvanised iron and provision of earth wire, galvanised iron protection pipe 15 mm bore,medium grade up to and including test point including necessary earth work in any type of solid and PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) earth chamber, watering pipe 20 mm dia galvanised iron light grade with funnel, RCC (1:2:4) type B1 precast cover 40 mm thick with 6 mm dia mild steel bars complete all as shown in electrical plate No. 3, connected to earthing test point all as specified or indicated, including testing on completion. Note :- (i) Quoted rate deemed to include the cost of excavation and earth work, PCC pit, funnel and cover etc. (ii) Cost of earth lead & protection pipe upto length of 7.5m shall deemed to be included in the rate quoted

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in pipe 15mm dia or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia complete all as specified and directed.

M&L for design fabricating supply and erecting connecting and testing totally enclosed LT cubicle panel board 3 phase 4 wire system indoor type single door front opening type, separate compartment for each control gear, concealed to wall, provision of knock out type plates for various sizes of cables in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 2.0 mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of grey structural shade colour, built in industrial type locking arrangement and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs including taking down old LT panel from wall and making good the disturbed surfaces complete all as specified and directed and consisting of following :- Bus bar chamber :- Electrically grade bus bar aluminium of capacity 300 Amps of rated incoming control switch gear including inter connection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic non combustible, track resistant high strength FRP insulators for phase and neutral set of 4 for RYB & N - 01 set

Incoming (a) MCCB four pole 415 volts 50 Hz 200 Amps 36 KA -1 No. (b) Multi functional digital meter to read V, A, Hz, Kwh, Kvah etc - 01 No. (c) Indicator LED type for RYB set of 03 - 01 Set. Outgoing a) MCCB four pole 415 volts 50 Hz 63 Amps 16 KA -05 Nos (b) MCCB four pole 415 volts 50 Hz 40 Amps- 03 Nos. (c) MCB SPN 230 volts 50 Hz 40 Amps-03 Nos. (d) Provn of spare compartment for fixing of MCCB of capacity upto 125 Amps-01 No. Note:- Panel manufacturer should have in house powder coating plant with minimum 8 tanks pre-treatment of MS sheet facilities, dust free spray paint booth (8 tanks pre-treatment process inclcudes : degreasing/water rinsing/de-rusting/activation/phosphating/passivation). (ii) Thickeness of powder coating shall not be less than 80 microns and test certificate for powder coating shall be furnished alongwith LT panel.

Taking down old unservicable steel tubing and connections of any size upto 40/50mm bore from trencehs/walls/floors etc complete all as specified and directed.

Taking down old unservicable steel tubing and connections of any size upto 20/25mm bore from trenches/walls/floors etc complete all as specified and directed.

M&L for providing and fixing GI pipes 50mm dia complete with GI fittings including trenching and refilling external work etc complete all as specified and directed.

M&L for providing and fixing GI pipes 40mm dia complete with GI fittings including trenching and refilling external work etc complete all as specified and directed.

M&L for providing and fixing GI pipes 25mm dia complete with GI fittings including trenching and refilling external work etc complete all as specified and directed.

M&L for providing and fixing GI pipes 20mm dia complete with GI fittings including trenching and refilling external work etc complete all as specified and directed.

M&L for providing and fixing gunmetal gate valve 50mm with CI wheel of approved quality (screwed end) complete all as specified and directed.

M&L for providing and fixing gunmetal gate valve 40mm with CI wheel of approved quality (screwed end) complete all as specified and directed.

M&L for providing and fixing gunmetal gate valve 25mm with CI wheel of approved quality (screwed end) complete all as specified and directed.

M&L for providing and fixing gunmetal gate valve 20mm with CI wheel of approved quality (screwed end) complete all as specified and directed.

Taking down old unserviceable LT UG cable of any size upto 50 sqmm x 3.5 core complete all as specified and directed.

Supply and Laying of one number PVC insulated PVC sheathed XLPE power cable 1.1 KV grade of size 50 sqmm x 3.5 core direct in ground including excavation, sand, cushioning, protective covering and refilling the trench etc complete all as specified and directed. Note:- Depth of excavation shall not be less than 60 cm, width not less than 45 cm, punned thickness of sand cushionong not less than 18 cm and Un-reinforced precast cable cable covers flat of size 300 mm X 180 mm X 40 mm laid flat horizontally for cable protection. The qouted rate is inclusive of the same.

Supply and Laying of one number PVC insulated PVC sheathed XLPE power cable 1.1 KV grade of size 50 sqmm x 3.5 core clamped with 25mm x 3mm thick MS flat clamp on wall surface complete all as specified and directed.

Supply and fix LED security/street light fitting 60W, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as light source with toughened glass housing IP-66 protection and impact resistance of IK07 with suitable bracket made up of GI pipe medium grade bend top shape and fixed to pole/wall by means of suitable clamps, bolts and nuts as required at site and connected with suiable 3 core copper conductor cable from ceiling rose to fitting and testing after completion including taking down old unserviceable fitting complete all as specified and directed.

M&L for Earthing complete with galavanised steel plate electrode 600x600x6 mm thick buried directly in ground vertically ( earth pit to a depth of not less than 2.7 metre deep below ground level) with the top edge of earth place at a depth of not less than 1.5 metre below normal ground level connected to galvanised earth strip 25mm X 5mm by means of bolts, nuts, washers of galvanised iron and provision of earth wire, galvanised iron protection pipe 15 mm bore,medium grade up to and including test point including necessary earth work in any type of solid and PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) earth chamber, watering pipe 20 mm dia galvanised iron light grade with funnel, RCC (1:2:4) type B1 precast cover 40 mm thick with 6 mm dia mild steel bars complete all as shown in electrical plate No. 3, connected to earthing test point all as specified or indicated, including testing on completion. Note :- (i) Quoted rate deemed to include the cost of excavation and earth work, PCC pit, funnel and cover etc. (ii) Cost of earth lead & protection pipe upto length of 7.5m shall deemed to be included in the rate quoted

Supply and laying 25mm x 5mm thick GI strip in 40mm GI pipe from earth electrode including connection with GI nut bolt & spring washer including excavationand refilling complete all as specified and directed.

SAMYDOSS CONSTRUCTIONS (BID ID -3127135)

Kaadosh Real Estates Pvt Ltd (BID ID -3126324)

D Subramani & Sons (BID ID -3126394)