SPECIAL REPAIRS TO BUILDING NOS. B/J/11, P-36 AND SHED NO. 04 AT BSO YARD OF PMS UNDER GE PANAGARH

Amount

B/R Items

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc. ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound @ 3% by weight of cement content ,complete all as specified and as directed by Engrs-In-Charge. Note :- WPC will measuered and paid separatly under relevant item of schedule.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 ,complete all as specified and as directed by Engrs-In-Charge.

Supply only Integral water proofing compound ,complete all as specified and as directed by Engrs-In-Charge.

Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection ,foot path and hard standing ,complete all as specified and as directed by Engrs-In-Charge.

M&L for forming construction joint 30mm deep X 10mm wide with sealing compound grade A ,complete all as specified and as directed by Engrs-In-Charge.

M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in coping to chajja tops and all other similar works ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete size 465x355x265 mm including discharge pipe providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair Vitreous china Water closet (pedestal pattern) com plete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line ,complete all as specified and as directed by Engrs-In-Charge.

M & L for (a) providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry with acrylic based modified cementitaous composite compound coating of make as approved in technical instruction 5/2003 (b) First layer of slurry of cement @ 0.5 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (c) second slurry of cement @ 0.500 Kg/Sqm mixed with acrylic based polymer modified cementatious composite compounds @ 0.250 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (d) 200 micron thick polythene film pasted with the help of bituminous adhesive shall be provided over treatment ,complete all as specified and as directed by Engrs-In-Charge.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete ,complete all as specified and as directed by Engrs-In-Charge.

S&F for vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repairs 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair15 mm bore conceled stop valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC connection 15mm size PTMT nuts of length450mm ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT orCOLD' with long screwed sunk and fly nuts ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair grating square 150mm size of PTMT(minimum 100 gms) ,complete all as specified and as directed by Engrs-In-Charge. ( Make : Prayag or Equivalent)

S&F for sink made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510 mm x 410mm x 203 mm bowl size 430mm x 380mm x 203 mm ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair75mm PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC (SWR) P trap 110/110 mm bore ,complete all as specified and as directed by Engrs-In-Charge.. Make : Supreme/ Finolex

S&F for PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps ,complete all as specified and as directed by Engrs-In-Charge. Make : Supreme/ Finolex/Prayag.

S&F for PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC (SWR) 75 mm Bends (any radius) ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC SWR bends of 110 mm bore ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia. ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC (SWR) vent cowl 75 mm bore ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair 75mm Cast iron Nahani trap trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair tubular towel rail, brass chromium plated 20 mm dia `D' type 60 cm long between flanges ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats ( min weight 300 gms) ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repairchromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Non Skid joint free coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No 1.039 here-in-before but in skirting ,complete all as specified and as directed by Engrs-In-Charge.

M&L for coloured Vitrified Ceramic tiles 10 mm thick dark shade(square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar 1:6. ,complete all as specified and as directed by Engrs-In-Charge. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge

M&L for coloured Vitrified Ceramic tiles 10 mm thick dark shade(square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand jointed in neat cement slurry over 10 mm thick rendering in cement mortar 1:4. ,complete all as specified and as directed by Engrs-In-Charge. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge

M&L for Non Skid joint free coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ,complete all as specified and as directed by Engrs-In-Charge.

M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed ,complete all as specified and as directed by Engrs-In-Charge.

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes like tiles etc ,complete all as specified and as directed by Engrs-In-Charge.

M&L for rendering 10 mm thick on fair faces of brick work in CM (1:6) for receving vertical dado tiling ,complete all as specified and as directed by Engrs-In-Charge.

M&L for glazed tiles coloured ceramic tiles 200x300x 6 to 7 mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry painted in coloured cement to match ,complete all as specified and as directed by Engrs-In-Charge.

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation ,complete all as specified and as directed by Engrs-In-Charge.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each (without taking off shutters from the frame) ,complete all as specified and as directed by Engrs-In-Charge.

Taking down of chowkats or frames not exc 1.5sqm without taking off shutters from frames ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints ,complete all as specified and as directed by Engrs-In-Charge.

S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for ,complete all as specified and as directed by Engrs-In-Charge.

S&F for steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, without glazing bars, dovetailed or welded ,complete all as specified and as directed by Engrs-In-Charge.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ,complete all as specified and as directed by Engrs-In-Charge.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay ,complete all as specified and as directed by Engrs-In-Charge.

M&L for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 ,complete all as specified and as directed by Engrs-In-Charge.

S&F for joist, channel, angle,or tee sections,fixed independently,without connecting plates, etc. and similar work conforming to Fe 410-w (Gde-E-250) quality B ,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No 1.059 here-in-before but fixing only ,complete all as specified and as directed by Engrs-In-Charge.

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork ,complete all as specified and as directed by Engrs-In-Charge.

S&F for mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Factory made 35 mm thick 2nd H.W plain framed panelled shutters (two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI : 1003 (Part-I), kiln seasoned and chemically pressure treated ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing ,complete all as specified and as directed by Engrs-In-Charge.

M&L for sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n. exc 0.50 sqm each pane ,complete all as specified and as directed by Engrs-In-Charge.

S&F for butt hinges, extruded alluminium,with mild steel hinge pin,bright polished and fixed, type 75 mm size C21 ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 100 mm butt hinges medium weight cold rolled mild steel ,complete all as specified and as directed by Engrs-In-Charge.

S&F for aluminium anodised 200 mm barrel tower bolts of extruded section ,complete all as specified and as directed by Engrs-In-Charge.

S&F for aluminium anodised 150 mm barrel tower bolts of extruded section ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 150 mm long aluminium alloy handles,fabricated type, anodised ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 125 mm long aluminium alloy handles,fabricated type, anodised ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ,complete all as specified and as directed by Engrs-In-Charge.

S&F for small fittings 2nd class hard wood such as brackets of any type latch and hinge block shaped door and window stops and the like of 1st class hard wood including all necessary labour articles n. exc 200 cu. cm each ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 300 mm mild steel ordinary rat tail rod pattern spring including roller and solar plates ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair curtain rods/ harison mild steel chromium plated with fittings stainless steel brackets, stops, rollers etc ,complete all as specified and as directed by Engrs-In-Charge.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore ,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No 1.078 here-in-before but 20 mm bore ,complete all as specified and as directed by Engrs-In-Charge.

Refixing of 15mm steel tubing and including cleaning in positon (walls, ceiling and floor etc ,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No 1.080 here-in-before but 20mm bore ,complete all as specified and as directed by Engrs-In-Charge.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 15 mm dia medium grade galvanised,with all fittings and fixed complete to walls and ceiling or laid in floors ,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No 1.083 here-in-before but 20 mm dia ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling of cast iron 100 mm dia pipes jointed in cement mortar ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling of cast iron 75mm dia pipes jointed in cement mortar ,complete all as specified and as directed by Engrs-In-Charge.

S&F for cast iron soil, waste and vent pipes( sand cast pipes) 100 mm bore in any length with or without ears, with cement joint laid in trenches or in floors ,complete all as specified and as directed by Engrs-In-Charge.

S&F for cast iron soil, waste and vent pipes( sand cast pipes) 75 mm bore in any length with or without ears, with cement joint laid in trenches or in floors ,complete all as specified and as directed by Engrs-In-Charge.

S&F for bends 100 mm size dimnishing pieces or tapers (larger bore measured) ,complete all as specified and as directed by Engrs-In-Charge.

S&F for branch pieces 100 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches ,complete all as specified and as directed by Engrs-In-Charge.

S&F for cast iron cowels 75 mm bore ,complete all as specified and as directed by Engrs-In-Charge.

S&F for cast iron floor trap including jointing to waste pipe in run lead, dia of outlet 75mm, ,complete all as specified and as directed by Engrs-In-Charge.

S&F for bends 75 mm size dimnishing pieces or tapers (larger bore measured) ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling of plain or corrugated steel sheeting any gauge ,thickness for roof covering ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ,complete all as specified and as directed by Engrs-In-Charge.

M&L for complete removal/scrapping of existing treatment of plastered surfaces and applying one coat of alkali resistanse primer over a layer of 3 mm thick wall care putty and two coat of oil bound distemper ,complete all as specified and as directed by Engrs-In-Charge.

M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistanse primer over a layer of 3 mm thick wall care putty and two coat of oil bound distemper ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Preparation of newly plastered surfaces of wall and applying two coats of cement based paint ,complete all as specified and as directed by Engrs-In-Charge.

M&L for preperation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of primer ,complete all as specified and as directed by Engrs-In-Charge.

M&L for preperation of old plastered surfaces of wall and applying one coats of cement based paint including complete removal of exc treatment ,complete all as specified and as directed by Engrs-In-Charge.

M&L for preperation of old plastered surfaces of wall and applying two coats of cement based paint including complete removal of exc treatment ,complete all as specified and as directed by Engrs-In-Charge.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash ,complete all as specified and as directed by Engrs-In-Charge.

M&L Preparation of new plastered surfaces of wall and applying two coats of white wash ,complete all as specified and as directed by Engrs-In-Charge.

M&L for prepartion of newly ceiling surfaces and applying one coat of white wash ,complete all as specified and as directed by Engrs-In-Charge.

M&L for preparation of newly painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome or other primer ,complete all as specified and as directed by Engrs-In-Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint ,complete all as specified and as directed by Engrs-In-Charge.

M&L for prepartion of old ceiling surfaces and applying one coat of white wash ,complete all as specified and as directed by Engrs-In-Charge.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not other wise described over 10 cm with or girth ,complete all as specified and as directed by Engrs-In-Charge.

S&F for stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 750x600mm including screws ,complete all as specified and as directed by Engrs-In-Charge.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr ,complete all as specified and as directed by Engrs-In-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc ,complete all as specified and as directed by Engrs-In-Charge.

M & L for half brickwork with fly ash subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4 ,complete all as specified and as directed by Engrs-In-Charge.

M&L for brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 ,complete all as specified and as directed by Engrs-In-Charge.

M&L for brickwork with fly ash subclass 'B' brick straight or curved on plan exc 6m mean radious built in CM 1:6 ,complete all as specified and as directed by Engrs-In-Charge.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items ,complete all as specified and as directed by Engrs-In-Charge.

M&L for PCC(1:2:4) type B-1 (using 20mm graded aggregate) as in roof kerbs or mud stop rounded ,complete all as specified and as directed by Engrs-In-Charge.

1st Layer:- Grading with cement concrete - M & L for 25 mm thick average PCC 1:2:4 type B-0 (12.5 mm graded aggregate) for grading in roof all as per Para 11.42.2 of SSR Part –I 2009 as ,complete all as specified and as directed by Engrs-In-Charge.

M&L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar 1:4 without using extra cement and WPC ,complete all as specified and as directed by Engrs-In-Charge. Note:- WPC will be measured and paid separately.

2nd Layer :- Application of Primer - Primer the surface with a mixture of ShaliUrethane (R) BTD and potable water in the ratio of 1:1 i.e. (200 grm BTD & 200ml water) and apply @ 400grm/sqm of the mixture and allow to touch dry shall be applied on the prepared surface. complete all as specified and directed by Engr-in-Charge. Make STP Limited or equivalent ,to be applied by authorised applicater ,complete all as specified and as directed by Engrs-In-Charge.

3rd Layer: M&L for first coat of ShaliUrethane ® BTD @ 1 Kg/Sqm by roller/airless spray while the primed surface is takly and spread fiber glass net of 45 gsm with overlaps of 50mm in both directions when the surface is still tackly, second coat of ShaliUrethane (R) BTD @ 1 Kg/Sqm by roller/airless spray for final ,Make STP Limited or equivalent to be applied by authorised applicater ,complete all as specified and as directed by Engrs-In-Charge.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed or bedding layer in mortar 1:6 ,complete all as specified and as directed by Engrs-In-Charge.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade fixed with grey cement and pigment ,complete all as specified and as directed by Engrs-In-Charge.

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment and including 10mm thick rendering in cement mortar 1:4 ,complete all as specified and as directed by Engrs-In-Charge.

M & L for sand filling under floors or in foundation including watering and consolidation ,complete all as specified and as directed by Engrs-In-Charge.

M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in paving finished even and fair ,complete all as specified and as directed by Engrs-In-Charge.

M & L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in paving finished even and fair ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete as per manufacturer instructions ,complete all as specified and as directed by Engrs-In-Charge.

Demolation of RCC of any description including (renforcement cut as per requred)order to be dismanted ,complete all as specified and as directed by Engrs-In-Charge.

M&L for TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to specifications ,complete all as specified and as directed by Engrs-In-Charge.

M&L for RCC (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab supported on wall,cover slub beams, cantilever, bressummers, lintel and the like etc ,complete all as specified and as directed by Engrs-In-Charge.

Use and waste of formwork to roof slub slub as like not including 200 mm thick horizontal and vertical surface of concrete flat ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 20 mm thick black granite Machine cut jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ,complete all as specified and as directed by Engrs-In-Charge.

M & L for 18/19mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work ,complete all as specified and as directed by Engrs-In-Charge. (Make Kitply/Mayur).

S&F for Contineous (Piano) hinges, mild steel, bright finish or electrogalvanished (width of flaps 30mm) ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Ball catches with 8mm dia steel ball,and brass body and striking plate including letting in and fixed 140mm overall length of cover plate ,complete all as specified and as directed by Engrs-In-Charge.

S&F for cast iron or mild steel Wardrobe hooks (single) 50mm to 60mm ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) of any thickness including ridges, hips, valleys as in roof coverings ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Pre - Painted galvanized aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling of wall or ceilling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, of any thickness including cover fillets ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Anodised aluminium snap grid frame work for false ceiling ,complete all as specified and as directed by Engrs-In-Charge.

M&L for Providing and fixing non asbestors fiber cementbuilding board 6 mm thick in ceilling fixed to aluminium frame work as per manufacture instruction ,complete all as specified and as directed by Engrs-In-Charge.

S&F for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling cast iron work of any description ,complete all as specified and as directed by Engrs-In-Charge.

S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 ,complete all as specified and as directed by Engrs-In-Charge.

S&F for anodised aluminum frame of doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. ,complete all as specified and as directed by Engrs-In-Charge.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. ,complete all as specified and as directed by Engrs-In-Charge.

S&F for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg /m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. ,complete all as specified and as directed by Engrs-In-Charge.

M&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed ,complete all as specified and as directed by Engrs-In-Charge.

S&F for aluminium (extruded section body) door closer hydraulically regulated designation No-3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair 150mm long cover plate floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair Mortice lock, brass body 4 levers, vertical type, size 100 mm ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 4 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane ,complete all as specified and as directed by Engrs-In-Charge.

S&F for 6.3 mm thick sheet glass, ordinary quality and fixed with aluminum beading and gaskit suitable for aluminum frames in squares not exceeding 0.5 sqm in each pane ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 10 mm thick Endura cement concrete tiles of size n.exc.0.16sqm, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg /sqm over 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as per manufacturer instructions and direction ,complete all as specified and as directed by Engrs-In-Charge.

Dismantling post (steel or RCC) any section including taking out embedded portion and making good disturbed portion ,complete all as specified and as directed by Engrs-In-Charge.

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out , returning filling in and ramming earth and removing surplus soil to a distance n exc 50 m making good surface in soft/loose soil ,complete all as specified and as directed by Engrs-In-Charge.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete ,complete all as specified and as directed by Engrs-In-Charge.

S&F for mild steel angle and flat iron section fixed independently with out connecting plate of Fe-415-W (Gde-E-250) quality -B ,complete all as specified and as directed by Engrs-In-Charge.

S&F for MS galvanised chain link fancing of size 4 mm thick and 100 x 100 mm gap fixed with , including welding or nut & bolt of any size and type complete all as specified and as directed by Engrs-In-Charge,

S&F for mild steel bar 10 mm dia round bar cut to length, bent to shape ,complete all as specified and as directed by Engrs-In-Charge.

S&F for MS Screw bolts (machine made) with hexagonal or square heads at one end and screw other and each screw to be fixed with washer and nuts exc 5 cm but not exc 10 cm long, diameter of 5 to 10 mm complete all as specified and as directed by Engrs-In-Charge.

M&L for preparation of new steel surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and as directed by Engrs-In-Charge.

M&L of extra for forming fair finish drain channel 45 cm inner girth in cement concrete using extra cement, complete all as specified and as directed by Engrs-In-Charge.

E/M Items

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing ,complete all as specified and as directed by Engrs-In-Charge.

Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) ,complete all as specified and as directed by Engrs-In-Charge.

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLS cable earth wire and connecting to earth dolly and brass screws, washers etc.,complete all as specified and as directed by Engrs-In-Charge.

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including Modular pressed steel terminal switch boxes of diffrent module and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc.,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No.2.04 here-in-before but One 3 pin 5 Amps socket out let points on independent board

All as per Item No. 2.04 here-in-before but 5 Amp socket on same board with other switches.

M&L wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including Modular pressed steel terminal switch boxes of diffrent module and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. ,complete all as specified and as directed by Engrs-In-Charge.

All as per Item No. 2.07 here-in-before but for one light point controlled by two -2 way switches.

S&F for switch piano flush type, single pole , 6 Amps, one way ,complete all as specified and as directed by Engrs-In-Charge.

S&F for switch socket 2 in 1 multipurpose 5 pin , (6 Amps ) ,complete all as specified and as directed by Engrs-In-Charge.

S&F Socket outlet 3 pin, 5A, flush type ,complete all as specified and as directed by Engrs-In-Charge.

S&F switch Socket combination 5A/16 Amps 5 in 1, flush type controlled by one switch complete ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular switch 1 way 6 A, 1 module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular socket 6 A -2/3 pin combined, 2 Module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular Switch socket Combination 16A, 6 pin, 3 module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular Fan stepped regulator, 120 W, 2 Module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular white cover plate with frame 2 module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular white cover plate with frame 3 module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular white cover plate with frame 6 module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Modular white cover plate with frame 8 module ,complete all as specified and as directed by Engrs-In-Charge.

S&F for ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps ,complete all as specified and as directed by Engrs-In-Charge.

S&F for stepped type electronic fan regulator flush type 240 Volts ISI marked ,complete all as specified and as directed by Engrs-In-Charge.

S&F for lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings,complete all as specified and as directed by Engrs-In-Charge.

S&F for LED bulb 7 watts, 240 volts, ISI marked,complete all as specified and as directed by Engrs-In-Charge.

S&F for Bell push , flush type , 5 amp ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Buzzer, Ding dong, AC 230 Volts, single pole 230 volts ,complete all as specified and as directed by Engrs-In-Charge.

S&F for exhaust ventilation fan of sweep 230mm,240 volts, BEE 5 star rated, ISI marked ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair for Modular type 25 Amps power unit combine with on/off switch enclosure single pole and neutral with two pin and earth socket ,complete all as specified and as directed by Engrs-In-Charge.

S&F for two single core, 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked), concealed, including 4 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire ,complete all as specified and as directed by Engrs-In-Charge.

S&F for two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire,complete all as specified and as directed by Engrs-In-Charge.

S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size ,complete all as specified and as directed by Engrs-In-Charge.

S&F in reapir 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection ,complete all as specified and as directed by Engrs-In-Charge.

S&F Surface mounted type decorative light fitting 1 x 10W LED 6k 230V AC, 50Hz complete with all accessories ,complete all as specified and as directed by Engrs-In-Charge.

S&F recessed mounted 2' x 2 ' LED luminaire 42 watts for grid ceiling minimumm lumen output 100 lumen/Watt, pre-treated CRCA frame powder coated with diffused Profied including necessary connection ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair street light bracket made out of GI pipe light grade 25 mm dia 1.5 mtr long bent to required shape as directed and fixed to pole complete with painting and including two set of 20x3mm FI clamps and fixing arrangement such as nuts, bolts and washers,complete all as specified and as directed by Engrs-In-Charge.

S&F for Vertical distribution board (VTPN) double door TPN 8 way with IP 54 multiphase outgoing suitable for mounting 100 Amps as incomer with Bus bars, Neutral links complete with all accessories ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact ,complete all as specified and as directed by Engrs-In-Charge.

S&F for epoxy powder coated sheet metal enclosure for DBs, Single door (when MCBs to be used), Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact ,complete all as specified and as directed by Engrs-In-Charge.

S&F for epoxy powder coated sheet metal enclosure for DBs, single door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact ,complete all as specified and as directed by Engrs-In-Charge.

S&F for MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCCB are included in unit rate of each MCCB of any rating).

S&F for MCCB of 4 pole , 415volts of capacity 125 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection ,complete all as specified and as directed by Engrs-In-Charge. Note :- Proper and suitable size cable lugs to be fixed with MCCB are included in unit rate of each MCCB of any rating.

S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection ,complete all as specified and as directed by Engrs-In-Charge. Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.

S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection ,complete all as specified and as directed by Engrs-In-Charge.(Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

S&F in repairs MCB TPN 40 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating

S&F in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I ,complete all as specified and as directed by Engrs-In-Charge with testing on completion.

S&F in repair 4 mm dia GI earth lead with clamp, connection ,complete all as specified and as directed by Engrs-In-Charge.

Supply & fixing ceiling fan 1200mm size , star 5 rated, ISI mark, 240V, 50 Hz ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC Exhaust ventilation fan of sweep 250 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size,complete all as specified and as directed by Engrs-In-Charge.

S&F for wall mounted fan 400mm size , star 5 rated, ISI mark, 240V, 50 Hz ,complete all as specified and as directed by Engrs-In-Charge.

Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. Note : Accessories such as gun metal bush and split pin and jam nut shall be measured and paid under relavtem here-in-after.

Taking down of exhaust fan/ wall mounted fan upto 450mm sweep, opening, replacement of unserviceable accessories, oiling, greasing, complete overhauling of fan and re-assembling and testing complete for efficient functioning after fixing / hanging in position including provision of 0.5 sq mm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan ,complete all as specified and as directed by Engrs-In-Charge. Note : Gun metal bush will be measured and paid under relavant item here-in-after.

M & L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc ,complete all as specified and as directed by Engrs-In-Charge.

M & L for painting of exhaust fan/ wall mounted fan carefully with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc ,complete all as specified and as directed by Engrs-In-Charge.

Supply only capacitor 2.5 MFD ,complete all as specified and as directed by Engrs-In-Charge.

Supply only gun metal bush of sizes suitable for exhaust fan / wall fan upto 450 mm sweep ,complete all as specified and as directed by Engrs-In-Charge.

Supply only ball bearing suitable for Ceiling Fan / Exhaust Fan / Wall Fan ,complete all as specified and as directed by Engrs-In-Charge.

S&F in repair MS clamp made of flat iron size 25 x 6 mm including nuts, bolts and 'S' hook ,complete all as specified and as directed by Engrs-In-Charge.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) ,complete all as specified and as directed by Engrs-In-Charge for the following ratings : (a) 35 Sqmm x 4 core Note :- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) ,complete all as specified and as directed by Engrs-In-Charge for the following ratings : (b) 70 Sqmm x 3.5 core Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete ,complete all as specified and as directed by Engrs-In-Charge.

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in hard/dense soil ,complete all as specified and as directed by Engrs-In-Charge.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil ,complete all as specified and as directed by Engrs-In-Charge.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point,complete all as specified and as directed by Engrs-In-Charge.

M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling ,complete all as specified and as directed by Engrs-In-Charge. Note :- Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection ,complete all as specified and as directed by Engrs-In-Charge.

M&L sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable ,complete all as specified and as directed by Engrs-In-Charge.

M&L for PCC 1:2:4 type C2 using 20mm graded for coping incl necessary formwork finished fair using extra cement complete all as specified and directed by the Engr-in-Charge.

M & L for parallal boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe etc ,complete all as specified and as directed by Engrs-In-Charge.

S&F in replacement Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and as directed by Engrs-In-Charge.

Supply , install, testing and commissioning of floor mounted LT Outdoor panel board AC 415 V , 50 HZ 3 Phase 4 wire of suitable size for accomodating the following accessories totally enclosed self supporting structure / cubicle , fully compartmentalized type , suitable for outdoor use , with bottom cable entry with suitable cable glands structure made out of 3.15 mm thick with CPRI Approved CRCA steel sheet of Size ( 1.2 x 1.2 x 0.6) m with angle iron frame work and legs of ISA 50X50X5 mm , with four legs grouted to PCC (1:2:4) type B1 , foundation block with suitable mounting arrangement for bus bars voltmeter, ammeter , changeover switch and MCCBs , hinged doors at front with suitable locking arrangement , Provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated ,complete all as specified and as directed by Engrs-In-Charge :- BUSBAR : (i) Copper bus bar 400 Amps , supported on non hygroscopic fibres and brass screws for mounting -04 Nos INCOMER : (a) Supply and fixing MCCB 4 pole 415 Volts of breaking capacity of 25 KA of 200 Amps with Fixed thermal and Fixed magnetic setting- 01 Nos. (b) Supply and fixing Changeover switch 4 pole 415 Volts of 100 Amps- 01 Nos. INDICATING DEVICES : (a) Supply and fixing LED Indicating lamps for Main Supply indicating R, Y, B - 03 Nos. (b ) Supply and fixing Digital Ampere Meter 31/2 digit display , incl CT having CTR 200/5 - 01 Nos & Digital Voltmeter 0-500 Volts , SIF 96 - 01 Nos OUTGOING FEEDERS : (a) Supply and fixing MCCB of 4 pole , 415volts of capacity 125 amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting - 02 No (For Lighting load and AC load) (b) Supply and fixing MCB of 4 pole , 415volts of capacity 63 amps with breaking capacity of 10 KA - 02 No.

M&L for earthing complete with galvanised mild steel earth plate electrode 600 mm x 600 mm x 6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

S&F for GI pipe light grade 40 mm dia of size for road cross of cable,ISI marked ,complete all as specified and as directed by Engrs-In-Charge.

S&F for XLPE armoured cable 16 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed ,complete all as specified and as directed by Engrs-In-Charge.

S&F for recess cum surface light round shape,240v, ISI mark, 18 watts ,complete all as specified and as directed by Engrs-In-Charge.

S&F for electric water heater storage type 25 Ltrs with all fixing arrangement including nuts & bolts etc. ,complete all as specified and as directed by Engrs-In-Charge.

Supply and laying of pipe GI medium grade 15 mm dia complete in wall ceiling or floor etc ,complete all as specified and as directed by Engrs-In-Charge.

S&F forStop valve fancy type CP cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe ,complete all as specified and as directed by Engrs-In-Charge.

S&F for Bib tap cast copper alloy high pressure of 15 mm size with crutch or butterfly handle screwed for iron pipe ,complete all as specified and as directed by Engrs-In-Charge.

S&F for PVC Connections 15 mm size with PTMT nuts of length 300 mm long, ISI marked ,complete all as specified and as directed by Engrs-In-Charge.

S&F for rotational moulded polyethylene water storage tanks of capacity 500Ltrs (cylindrical, Vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete icluding taking down old unservicable tank, complete all as specified and as directed by Engrs-In-Charge.

S&F of high pressure PTMT float valve with epoxy coated Aluminium rod and high density polyethene ball screwed both ends for Iron pipe 25 mm dia with fly nut ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 25mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified including talking down old unservicable gate valve ,complete all as specified and as directed by Engrs-In-Charge.

M&L for 25mm bore GI Tubing grade in Trenches/ Floor/ Pillar and connections including fitting like socket / Union/ Tee / Reducer Nipple etc ,complete all as specified and as directed by Engrs-In-Charge.

Schedule 'A' Part II Schedule of Credit

UNITED BUILDERS

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/s Bhola Shah Bansi Lall

K L BAKSHI AND SONS