Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹2.3 L
Closing Date
21 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
ROHTAK W/S DIVISION, ROHTAK
Supply, erection and commissioning of Pumps, Motors along with allied materials at Permanent Pump House at RD 5750 of Pilana Minor.
2026_HRY_552866_1
16951-72/5AC dt. 07/10/2026
Open Tender
Pumps/Motors
Supply
150 days
ROHTAK
Please refer Tender documents.
3 documents required · 3 mandatory
₹15,000
Yes
₹2.3 L
Yes
8 Oct 2026
8 Oct 2026
22 Oct 2026
8 Oct 2026
21 Oct 2026
8 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Erection & Commissioning of 5 C/s axial Flow Water lubricated Vertical Pump of 5 Cs. Discharge at 1440 RPM having lift of approx 17 feet with Y body, including Strainer,, Syphon Breaker valve with mouth bend, MS Bend with both end flanged, SS/HT Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department (Ref. SPC 17.02.2026). | 2 | No. | - | - |
| 2 | Supply, Erection & Commissioning of solid shaft Motor of capacity 30 HP, 1440 rpm, 3 Phase, 380 Volt+- 10%, with efficiency class IE2 suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department. (Ref. SPC 17.02.2026) | 2 | No. | - | - |
| 3 | Supply, Erection & Commissioning of 10 C/s axial Flow Water lubricated Vertical Pump of 10 Cs. Discharge at 1440 RPM having lift of approx 17 feet with Y body, including Strainer, Syphon Breaker valve with mouth bend, MS Bend with both ends flanged, SS/HT Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department (Ref. SPC 17.02.2026). | 2 | No. | - | - |
| 4 | Supply, Erection & Commissioning of solid shaft Motor of capacity 60 HP, 1440 rpm, 3 Phase, 380 Volt+- 10%, with efficiency class IE2 suitable for fitment with 10 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department. (Ref. SPC 17.02.2026) | 2 | No. | - | - |
| 5 | Supply, Erection & Commissioning of LTDB of 400 Amp. Capacity including all accessories as one incomer of MCCB (400 Amp) with 63 amp MCB for lightning loads and 04 No. outgoing MCCB with 4 No. fully automating Star Delta Starter suitable for operation of 02 No. motor of capacity of 50 HP and 02 No. motor of capacity of 30 HP. including all accessories with suitable contactor rating with control transformer for control supply, indicator, relay, digital meter, push button, bus bars etc. outgoing indicator, having MPR and all types of protection i.e. UV/ OV, over current, phase imbalance/ phase reversal protection, looked rotor, dry run etc, suitable capacitor bank with APFC, separate relay for single phase protection etc complete in all respect with stand of MS channel having suitable operating height above the kacha/ pucca floor with a stand of MS channel (I/C suitable size PVC 3 phase submersible CU wire from starter to motors) as per site requirement as per approved specification of the department. (Ref. HPPC 13.03.2024) | 1 | No. | - | - |
| 6 | Providing & fixing of Lightening Arrester with protection radius of 50 mtr along with earthing arrrangement as per proper specifications for pump house building and tranformer complete in all respect as per site requirement. (Ref. HPPC 23.06.2026) | 1 | Job | - | - |
| 7 | Supply, erection and commissioning of 3.5 core 185 sqmm Armoured PVC aluminium power Cables, grade as per IS 7098-1985 as per approved makes and other allied material completed in all respect. (Ref. HPPC 22.01.2025) | 80 | Mtr | - | - |
| 8 | SITC 4 pole on load manual change over switch in SS enclosure of 400A (HSR-23.22.8.5) | 1 | No. | - | - |
| 9 | Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia. made of MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required) (Ref. SPC 17.02.2026) | 30 | Mtr | - | - |
| 10 | Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia. made of 6mm thick MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required) (Ref. SPC 17.02.2026) | 30 | Mtr | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
BOQ_632734.xls
BOQ • 0.24 MB
BID_1.pdf
Additional Documents • 3.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .