Construction of Bio-Medical Waste Storage Room at Civil Hospital Aizawl

Amount

Earthwork in excavation in foundation trenches or drains etc. (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

Hard Soil ( pick work )

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work upto plinth level:

1:2:4 (1 cement :2 course sand :4 stone aggregate 20mm nominal size)

Providing and laying in position reinforced cement concrete excluding cost of centering and shuttering , finishing and reinforcement in -

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls including attached pillasters, columns, pillers, posts, piers, abutments, return walls, retaining walls, struts, buttresses, string or lacing courses, fillets etc. upto floor five level excluding cost of centering shuttering etc complete.

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement complete.

1:1.5:3 (1 Cement:1.5 Coarse Sand:3 graded Stone aggregate 20 mm nominal size.)

Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for all heights :

Foundations, footings, bases of columns etc. for mass concrete.

Columns, pillars, piers, abutments, posts and struts.

Lintels, beams, plinth beams, girders, bressumers and cantilevers, etc.

Suspended floors, roofs, landings, shelves and their support, balconies and chajjaj,etc.

Staircases (except spiral staircase) excluding landings

Steel reinforcement for RCC work including straighthening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars of grade Fe-500 or more.

Extra for providing richer or leaner mixes respectively at all floor levels .

Providing M-25 grade concrete instead of M-20 grade BMC/ RMC. (Note:- Cement content considered in M-25 is @ 330 kg/cum)

Half brick masonry with first class brick in superstructure above plinth level upto floor V level.

in cement mortar 1 : 4 ( 1 cement : 4coarse sand )

Providing and fixing factory made PVC door frame made of PVC extruded section (Chaukhat) having overall dimension of 48x40 mm (tolerance + 1 mm) with wall thickness 2.0 mm + 0.2 mm, corners of the door frame to be mitred and joined by means of plastic/M.S. galvanished brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanised M.S. tube of size 19x19 mm and 1 mm + 0.1 mm wall thickness and 3 Nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge. (Sintex, Plasopan or equivalent) :

Factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter) (Sintex, Plasopan or equivalent).

30mm thick shutter

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 40mm dia. steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Supplying and fixing M.S. decorative railing consisting of top and bottom rails of 40mmx40mm square or circular section at distance of 788mm apart, 30mmx30mm square or circular section decorative intermediate balusters welded to top and bottom rails at 280mm apart. The base of balusters at 560mm apart welded with base plate of 60mmx3mm thick and fixed with cement grouting firmly to concrete section including steel priming ans steel painting complete etc.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS: 733 and IS : 1285, anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately ). For fixed portion

Anodised

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .

With glass panes of 5.00 mm thickness

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

Light shade using white cement.

Extra if chequered precast cement concrete tiles laid in treads of steps not exceeding 30cm in width

Providing and ceramic glazed floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in all colours,shades, except white,ivory,grey,fume red brown, laid on 20mm thick cement mortar 1 : 4 (1cement : 4 course sand ) including pointing the joints with white cement and matching pigments etc. complete. as per designed colour.

Matt/Antiscratch

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to e specified by the manufacaturer),of approved make, in all colours, shades wxcept burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12mm thick bed of cemunt mortar 1:3 (1cemeny :3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm,

Providing and fixing White vitreous china wash basin Standard of Parryware/ Hindware/ Cera and equivalent make with R.S. or C.I. brackets, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plugs, 32mm C.P. brass waste of standard pattern, 32mm C.P. brass traps and union complete including painting of fittings and brackets, cutting and making good the walls wherever required.

Vitreous China Wash basin Compact 450 x 300 mm with single 15 mm C.P. brass pillar taps

White

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing on wall face SWRPVC soil, waste and vent pipes including jointing with rubber lubricant/cement solvent complete.

110mm dia.

75mm dia.

Providing and fixing SWRPVC plain bend of required degree ( 87.50° ) including jointing with rubber lubricant/cement solvent complete.

75mm dia.

Providing and fixing SWRPVC plain bend of required degree (45°) including jointing with rubber lubricant/cement solvent complete.

110mm dia.

75mm dia.

Providing and fixing SWRPVC bend with access door of required degree including jointing with rubber lubricant/cement solvent complete.

75mm dia SWRPVC bend with access door.

Providing and fixing single equal SWRPVC plain junction of required degree ( T-junction ) .

Providing and fixing SWRPVC socket including jointing with rubber lubricant/cement solvent.

75 mm dia socket.

Providing and fixing uPVC multi floor trap with floor trap grating including jointing with rubber lubricant/ solvent cement complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Sintex or quivalent

Providing and fixing brass bib cock of approved quality.

15mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Class-II

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall

15mm dia nominal bore.

20mm dia nominal bore.

25mm dia nominal bore.

Making connection of CPVC pipes distribution branch by providing and fixing equal Tee with jointing, testing complete including cutting and making good etc.

15mm dia nominal bore.

20mm dia nominal bore.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 90o with jointing, testing complete including cutting and making good etc.

15mm dia.

20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Elbow 45o with jointing, testing complete including cutting and making good etc.

15mm dia.

20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Female Adaptor (Brass) with jointing, testing complete including cutting and making good etc.

15mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Socket/Coupling with jointing, testing complete including cutting and making good etc.

20mm dia.

Making connection of Astral CPVC pipes distribution branch by providing and fixing Reducer Coupling with jointing, testing complete including cutting and making good etc.

Applying double coated cement slurry with water proofing chemical (SUPER latex chemical) in proportion 1 : 4 :7 (1 latex : 4 water :7 cement) including cleaning the treated surfaces with brushes etc.@ 0.158kg/sqm .

Providing and mixing water proofing chemical (PIDIPROOF LW chemical) in plain and reinforced cement concrete work 1 : 1.5 : 3 , @ 0.4 % by weight of cement.

12mm cement plaster 1 : 3 (1 cement : 3 fine sand).

15mm cement plaster 1 : 4 (1 cement : 4 sand)

6mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand

Applying priming coat with ready mixed primer of approved brand and manufacture on plaster surface

Ready mix white primer.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (one or more coats)

Wall painting with interior emulsion paint of approved brand and manufacture on new work (two or more coats) to give an even shade.

Regular interior emulsion like Rangoli deluxe emulsion etc.

Wall painting with water and weather proof paint (Latex Emulsion base ) on cement works of approved brand and manufacture (ISI/ISO certified) of required shade on new work (two or more coats) to give an even shade

1.8m high polysteel goat proof fencing with 2.4m angle iron posts 50 x 50 x 6mm size placed 2.0m apart embedded in cement concrete block 1:3:6 (1 cement : 3 sand : 6 stone aggegate) of size 25 x 25 x 60 cm fixing with nails and wire etc. including earthwork complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Nominal concrete 1:4:8 or leaner mix

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work).

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:

In cement mortar

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead

Of area beyond 3 sq. metres

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:

G.S. Sheet

Note :- Transport charges (carriage) for dumping the building waste at near by dumping yard/zone. Disposal of approx 1577 cft (building waste generated ) around 15 Km from DH Aizawl in 9 trip i.e. 200 cft /Trip

Providing and fixing Eye Wah Basin of approved quality & make and as per the direction of Engineer-in-charge.

ELECTRICAL (MPWD 2016)

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1977) and Flame Retardant (FR) 1100 voltage grade copper flexible wire straded copper running inside PVC casing & capping (Gr-III) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from control switch to the light point etc as required:

Short point

Medium point

Long point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694(1990) and Life line Flame retardant (FR)1100 voltage graded copper flexible wire stranded copper running inside PVC casing & capping (Gr-III) of different sizes fixed, surface on the wall/ceiling/floor as per convinience including junction box having required numbers of ways from DB to the power plug/socket 15/16A point etc. as required :-

Long Point

Wiring in looping system with PVC wire sheathed standard copper conductor/wires as per IS:694 (1990) and Flame retardant (FR) 1100 voltage graded copper flexible wire stranded copper running inside PVC Casing & capping (Grade-II) of all available sizes diameter fixed, surface on the wall/ceiling/floor as per convenience including junction box having required numbers of ways from Main to Sub- Main/DB/Sub-Main/DB to SDB/SDB/Switch boards/SDB to switch boards as required:-

2X2.5 sq.mm

2X4sqmm

Downlight 10 W LED 4K/6K ARIES Recess mounted, compact vertical, round shaped downlighter in white finish ready to use. (Havells/ Phillps/Gromton/Bajaj/SYSKA)

Downlight 16W LED 4K/6K SOLITAIRE LED Recess mounted downlighter with extruded Al. heat sink with high brightness LED, ideally suited for low ceiling areas to give glare free light. (Havells/ Phillps/Gromton/Bajaj/SYSKA)

Street Light 1X26W TU ORION MINI RETRO 26 Street light luminaire in a single pc. deep drawn aluminium housing anodised inside & Acrylic Cover general spread . (Havells/ Phillps/Gromton/Bajaj)

Exhaust fan 300mm sweeps ISI marked (Usha/Havells/Polar/Gromton/Bajaj)

Installation, testing and commissioning of pre-wired Flourescent light fitting of all types, with all necessary accessories and tubes directly on ceiling/Wall including connection with 1.5 Sqmm PVC insulated copper conductor single core cable etc as required.

Supplying and fixing of Modular switch board of the following sizes/modules on surface/recess including PVC/Steel boxes,modular plate and necessary switches,plug/socket, and fan regulators etc. with necessary painting if necessary

1S + 1 Soc 16A

MCBs SP/SP&N/DP/TP/TP&N/FP Supplying and fixing of all types and rating MCBs, RCCBs, ELCBs etc, 240/415 Volts 50 Hz AC supply in the existing MCB DB complete with connections, testing & commissioning etc in completed:

5 Amps' to 32 Amps' rating,SP, MCB B- series

Supplying and fixing of different ways Maniature Circuit breaker(MCB) Distribution board(DB) single phase SP & N/Three Phase TP&N economy type with sheet metal,Acrylic cover Phosphatised powder painted, Bus Bar, Neutral link, earth bar anf din rail conforms to IS:13032 .IS:8623, BS:5486 240/415 volts, 50 Hz, AC supply on recess/surface including inter-connection,painting etc. in completed.

4-ways MCB DB SP&N DD metallic door

Compliance to ESMP ( including Water Quality, Ambient Air Quality and Climate and Noise )

Triton Construction (BID ID -1275)