C o Community Hall in isolated pkt 13 , near Palam Village ,Dwarka

(A)FIRE FIGHTING SYSTEMS (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm 56M Head

(a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads 2280 lpm 56 m head

(a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, single stage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm 35m head

(a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. (d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads 180 lpm 56m head

Supplying, installation, testing & commissioning Horizontal centrifugal pump set of make Kirloskar/Crompton with C.I casing, CI impeller, SS shaft with Suitable HP, 3 Phase 2900 RPM electric motor suitable for operation on 400/440 volts, 3 phase 50 Hz AC, l00mm dia pressure gauge, G.M. isolation cock complete as required. Cost shall include electrical control panel, starters, CTs, Ammeter, Voltmeter, suitable rating TP & N SDFU, phase indicating lamps, Al. bus bars of suitable ratings with wiring & all accessories etc. a) Domestic Water Pumps with motor. b) Capacity 6 LPS each. c) Head 30 Mtr. d) RPM 2900

Supplying, installation, testing and commissioning mono block type self priming drainage pump of 300 LPM discharge of water at 10 m head complete with base plate and all accessories suitable for operation on 230V single phase 50Hz. A.C. supply complete with starter for automatic operation i/c water level sensing device, inter connection with submersible cable etc. as reqd.

Fabrication, supplying, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof,powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required. INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter, All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification

Fabrication, Supplying, Installation, Testing & Commissioning of Electrical Motor Control Panel for 7.5 HP Terrace Pump of cubical construction floor/wall mounted, fabricated out of 1.6mm thick CRCA sheet, compartmentalised with hinged lockable doors,dust & virmin proof, powder coated of approved shade, interconnetion with solid aluminium strip/single core PVC insulated FR copper conductor cable, having suitable mountings for switchgear & accessories & internal control & power wiring with suitable rating as required and earth terminals, numbering etc.complete in all respects, suitable for operation on 415 V, 3 Phase 50 HZ AC supply with encloser protection consisting of following material in the panel:- (i) One no 100 A TP incoming MCCB. (ii) 0-500 volts 96 x96 square mm voltmeter with slector switch and control fuses- 1 SET. (iii) 0-200 amps 96 x96 square mm ammeter with CT's and slector switch- 1 SET. (iv) Phase indicating lamp with toggle switches. (v) Indication lamps for ON/OFF/TRIP status Outgoing Feeders / Starters. (vi) 32 A MCB - 1 Set (vii) Star Delta starter suitable for 7.5 HP motor for Downcomer Pump - 1 Set. (vii) Auto manual selector switch (viii) Single phase preventor (x) Overload relay Provision in control panel to connect pressure switch for autmatic operation of roof fire pump.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required: Butterfly valve 150 mm

Butterfly valve 100 mm