Certain repairs to Misc B/R work in OTM accn in AOR of AGE B/R-I under GE (East) Ferozepur Cantt

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons laid bedded , dry and pointed etc, complete all as specified and directed.

M & L sand filling under floors or in foundations including watering and consolidation complete all as directed by Engineer-in-charge .

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 with grey cement and pigment complete all as specified and directed. Note :- The colour of tiles Red/Yellow approve by Engr -in -charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thick M-40 with grey cement and pigment complete all as specified and directed. Note :- The colour of tiles Red/Yellow approve by Engr -in -charge.

All as per item No-03, but except tiles, complete all as specified and as directed.

M&L for Granite(of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat CM 1:4 complete including making circular gas pipe hole, moulding at corners and polishing type, complete all as specified and directed.

M&L for Chequered cement concrete tiles (coloured) 300mmX 300mmX25 mm thick thick heavy duty ,chmecially treated Chequred/pavement tiles of size and shape as approved over 15mm thick screed bed in CM 1:6 , set and jointed in neat cement siurry and pointed with grey cement mixed complete all as specified and directed. Note :- The colour of tiles Red/Yellow approve by Engr -in -charge.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floor topping, 75 mm thick, complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.