ADDITION AND ALTERATION TO BLDG NO P-403 (MAIN BUILDING) AT STATION MESS AND SPECIAL REPAIR TO ELECTRIC WIRING OF MOTIVATION HALL (BLDG NO-956), DSC BLOCK (BLDG NO-411) AND CAMP STORE AT INS ABHIMANYU AT NAVAL STATION KARANJA

Amount

Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm each without taking off shutters from the frame complete all as specified and as directed by Engr-in-charge.

Taking down shutter of any discription not exc 1 sqm each complete all as specified and as directed by Engr-in-charge.

Taking down shutter of any discription exc 1 sqm and not exc 2 sqm each complete all as specified and as directed by Engr-in-charge.

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed by Engr-in-charge. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.

Material and labour for 12mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket complete all as specified and as directed by Engr-in-charge.

Supply and fix for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified and as directed by Engr-in-charge.

Supply and fix for 4mm thick sheet glass ordinary quality black glass colour, white or multicolour like balck etc., and glazing with oil putty in square exc 0.5 sqm in each pane with glazing pins complete all as specified and as directed by Engr-in-charge.

Supply and fix for rubber beading suitable for fixing 4mm/ 5mm thick glass in aluminium window/ doors etc., complete all as specified and as directed by Engr-in-charge.

Material and labour in repair fabrication of aluminium compositre panel of 4mm thick with 5mm aluminium core/ skin as a tap and bottom layer, middle layer 3mm thick of polythincore (LDPE) and finally with PVDF coating 28 to 32 micron and joints filed with silicon sealant and including aluminium frame of section 37.5mm x 25mm x 1.6mm fixed on the wall/ columns as a cladding and on ceiling of steel structure/ RCC ceiling with screw complete incl dismantling of old decayed panels and as per manufacture's instruction complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC water tubing 16mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer and slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, incl taking down old pipe line in concealed and surface complete all as specified and as directed by Engr-in-charge. Note: Pipe and fittings made from CPVC shall be clearly marked with manufactures name and trade mark. manufacturer test certificate (MTC) shall be provided.

All as per Item No.11 here-in-before but 20mm bore CPVC pipe.

Material and labour for new or old wall complete removal of existing treatment on external wall surface by sanding machine or any other mechanical means thereafter washing, rubbing down the surface, in order to remove dust, dirt, loose particles etc., and fill the visible cracks/ joints with crack seal caulking compound after cleaning the surface by clean water. Apply a coat of primer (water based primer) and allow to dry for six hours. Thereafter apply two coats of water proofing treatment on wall (WB high build anticarbonation cum water proofing including a coat of exterior grade weather proof acrylic emulsion paint by using Airless Paint Sprayer machine at any height of the building by using scaffolding complete all as specified and as directed by Engr-in-charge. Notes: (i) The material used for the teratment must have crack binding ability, water proofing properties and flexible (i.e cover hairline cracks upto 2mm effectively) and be elastomeric. (ii) External water proofing treatment on wall at any height of the building including acrylic paint shall be applied by mechnaically Airless paint sprayer machine only.

Supply and fix for 12mm thick vertical toughened glass including firm as in door shutters/ partition with including stainless steel SS-304 patch fitting fixed with anchor fastner, each glass panes shall be exc 1.5 sqm, but not exc 2 sqm each, all edges of glass shall be diamond polished complete all as specified and as directed by Engr-in-charge.

All as per item No.14 here-in-before but 12mm thick fully/ partily (as per site requirement) frosted high quality toughened glass with unit colour digital logo fit to width of glass shutter and other design/pattern like text in hindi/ english furnished by Engr-in-Charge etc. Colour of digital logo/pattern and matter will be furnished by Engr-in-Charge.

Supply and fix in repair 30mm dia stainless steel handle of 45 cms long and fixed to toughned glass as per manufacturer's instructions complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair stainless steel glass lock fixed to toughened glass as per manufacturer's instructions complete all as specified and as directed by Engr-in-charge.

Material and labour for stainless steel 304 grade framed work fancy, ornamental type in gates, stair hosing work, railing and other similar works including all or any type of welding at joints, holdfast, locking arrangement, necessary anchor fasteners, base plate, base cap, followed by buffering and polishing for smooth finish complete all as specified and as directed by Engr-in-charge.

Material and labour in repair cupboard, cabinate, wardrobe bar counter and kitchen is fabricated using 18/19 mm thickness high density fibre board (HDF) exterior grade, fixed with each other using solvent cement adhesive and fixed to timber frame work with screw complete all as specified and as directed by Engr-in-charge.

Supply and fix for width of flaps (when open) 30mm continuous (piano) hinges, brass, bright finish or electro galvanised complete all as specified and as directed by Engr-in-charge.

Supply and fix for 'L' Bihari hydraulic 'O' crank, auto hinges 180 degree openable, stainless steel hinges 125x63mm long bright polished fix to steel chowkhat/timber frame work with screw or nut or bolt complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair magnetic catcher 55x29mm size for continuous opening and closing of doors shutter like use for door megnet lock, cupboard magnetic lock, wardrobe, and similar use including all fitting like screws complete all as specified and as directed by Engr-in-charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and as directed by Engr-in-charge. Note: Measured overall as fixed along the centre line over fittings and accessories.

Supply and fix for PVC (SWR) eaves gutters, in any length with rubber ring joints, including all fittings for laid on wall or parallel to chajja / galvalume sheet fixed with mild steel clips type/ staples for tying complete all as specified and as directed by Engr-in-charge.

Dismantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof covering complete all as specified and as directed by Engr-in-charge.

Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated mangalore pattern steel sheet and curved at end portion of sheet of 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated and curved at end portion of sheet of 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-charge.

Supply and fix for 10 to 12mm thick plaster of paris sheets fix in ceiling with and including grid made out of angles and tees of 1mm thick GI sheets fixed at not more than 45cm centre to centre in both directions. Grid secured by vertical tie of GI sheet angle at not more than 1.2m centre to centre in both directions. The veritical tie of GI sheet angle shall be fixed with MS dash through fastners of 8mm dia. The ceiling is to be provided at different profiles like curved, flat, sunk and or raised moulding, the joints shall be filled with plaster of paris including taking down existing complete all as specified and as directed by Engr-in-charge.

Material and labour for preparing of new POP/ false ceiling surfaces and applying two coats royale luxury emulsion interior paint a luxurious smooth finish white or coloured over a coat of approved primer on walls or ceiling complete all as specified and as directed by Engr-in-charge.

Supply and fix for ISI marked aluminium (extruded section body) hydraulically regulated designation No-3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight betwwen 61 to 80 Kg and fixed complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair double action floor spring hydraulically regulated made upto min 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engr-in-charge.

Material and labour for second class hard wood plain solid (Sal wood, Shisham Wood and Deodar Wood), straight, chowkats and frames wrought ornamental/ decorative type framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises and removal to out of MoD land complete all as specified and as directed by Engr-in-charge.

Material and labour for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7mm or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm in floor over 15mm thick screed bed in cement motar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specified and as directed by Engr-in-charge.

Supply and fix for vitrified ceramic coloured dark shade tiles 8-10mm thick (square/ rectangular) polished area of each tile not exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed by Engr-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floor aprons, cills etc., laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-charge.

Supply and fix for 20mm thick granite (any type) machine cut laid over cement screed bed 15mm thick in CM 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, verticle surfaces and any position in cement mortar 15mm thick CM 1:4 including pointing in white cement mortar (1:2) using marble dust with admixture of pigment to match with shade of granite including chamfering and rounding of edges where required complete all as specified and as directed by Engr-in-charge.

Supply and fix for green marble 18 to 20mm thick machine cut, jointing and pointing with white cement slurry including 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and as directed by Engr-in-charge.

Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc., and precast concrete articles complete all as specified and as directed by Engr-in-charge.

Material and labour for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 1:2:4 (Using 20mm graded stone aggrgate) and setting in cement mortar (1:6) complete all as specified and as directed by Engr-in-charge.

Demolition of brick work or stone boulded masonry built in cement mortar or cement lime mortar complete all as specified and as directed by Engr-in-charge.

Material and labour for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for brick work with sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-charge.

Material and labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new steel surface of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick walls or stone walls etc., including racking out joint, hacking for key, scrubbing down with water etc., including removing debries directed for a distance max upto 500m complete all as specified and as directed by Engr-in-charge.

Material and labour for ready mix plaster for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. Note: WPC will be measured and paid separately.

Material and labour for ready mix plaster for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and as directed by Engr-in-charge.

Material and labour for ready mix plaster for rendering 5mm thick on ceilings in cement mortar 1:3 and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for three coats of white wash on newly plastered surfaces of ceilings including preparation of surface complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed by Engr-in-charge.

Material and labour for newly plastered surface and prepare the smooth surface with sand paper and applying two coats of royal acrylic distemper on walls or ceiling complete all as specified and as directed by Engr-in-charge.

Material and labour for complete removal of existing treatment from old decorated plastered surfaces of walls by vacuum based sanding machine, removal of nails etc., and filling cracks/hole with putty and applying two coats of royale luxury emulsion interior paint a luxurious smooth finish white or coloured over a coat of approved primer on walls or ceiling by auto roller complete all as specified and as directed by Engr-in-charge. Note: Wall care putty measured and paid separately.

Material and labour for applying 2mm thick exterior grade wall care putty on wall/ ceiling multipurpose mixer shall be used for uniform and mixing of putty complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair pillar taps 15mm bore cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair angle/ stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 60 cms long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI pipe of existing one complete all as specified and as directed by Engr-in-charge.

Material and labour for cutting out cracks 'V' section on existing roofs or terrace cleaning out and filling solidly with a hot mixture bitumen and clean dry sand 1:1 by weight complete all as specified and as directed by Engr-in-charge.

Taking down existing bitumen felt roof treatment including cement mortar bedding and cleaning the surface and removal outside the MoD land complete all as specified and as directed by Engr-in-charge. Notes: (i) Taking down earthing strips including insulators from roof for treatment and re-fixing of same with existing specification in the same position after laid APP membrance including replacement of broken insulators, PVC rawl plugs and screws etc., are deemed to be inclusive of rate quoted by the contractor. (ii) Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work. (iii) APP work shall be carried out on RCC PENT roof at 12 -15m height (non accessible roof).

Demolition of cement concrete (unreinforced) roof or chajja padding of any description and any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge.

Material and labour for PCC (1:2:4) type B-1 (Using 20mm graded mechanically crushed stone aggregates) as in padding to roof to maintain the required slope same like as in chajjas, balconies, canopies, desk slabs and in shelves and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Material and labour for water proofing treatment of roof consisting as under: (a) Applying evenly a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 litre/sqm including preparation of roof surfaces. (b) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm on plaster surface all as specified. (c) A layer of 4mm thick APP polymeric membrane of weight not less than 4.5 kg/sqm, reinforced with polyester non-woven fabric, duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions complete all as specified and as directed by Engr-in-charge.

Supply only water proofing liquid compound complete all as specified and as directed by Engr-in-charge.

Supply and fix for polythene film, black, 50 micron laid in roof/ floors complete all as specified and as directed by Engr-in-charge.

Material and labour for applying two coats bitumen water proofing aluminium heat resistance paint on the roof as per manufacture instructions complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair 5mm thick wooden fillet of width 35mm for wall panelling inclusive of fixing on to wall to make wooden frame as per specification etc., complete all as specified and as directed by Engr-in-charge.

Supply and fix for solid wooden walll panelling consisting of 15mm thick plain / design colour wooden sheet inclusive of solvent and fixing at site on wooden frame as per specifications and drawing as per direction of Engr-in-Charge.complete all as specified and as directed by Engr-in-charge.

Material and labour for two coats of smooth interior acrylic emulision with texture finish having VOC less than 50 grams per ltr complying LEADS criteria @ 1 ltr (undiluted)/ 10 sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacute insturctions complete all as specified and as directed by Engr-in-charge.

Taking down carefully copper/ aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc., removing and making good to the disturbed surfaces of walls /ceiling etc., with its original specification complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code drawn through concealed PVC conduit with all modular accessories like metal flush box, cover plate with frame plates of suitable sizes as per site requirement in and including 1.5 sqmm PVC insulated unsheathed copper conductor cable for continuos earth conductor (using green colour) to common earth and connecting to earth dolly for the following complete all as specified and as directed by Engr-in-charge. Note: The rates includes for neccessary wall cutting and chasing One light /fan/ call bell point controlled by one switch.

One 5 pin socket outlet 5 Amps on independent board.

One 5 pin socket outlet 5 Amps on same board.

All as per item No.75 here-in-before but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 sqmm multistandard insulated unsheathed copper wire for continuos earth on independent board.

All as per item No.75 her-in-before but with 4 sqmm multistranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 4 sqmm multistandard insulated unsheathed copper wire for continues earth on independent board.

Supply and fix for switch modular single pole one way, 6 Amp (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for switch modular single pole one way, 16 Amp (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for ceiling rose PVC/ polycarbonate, isolated body surface bakelite 65mm dia three terminals complete all as specified and as directed by Engr-in-charge.

Supply and fix for modular type fan regulator electronic type 100W, 250V for ceiling fan complete all as specified and as directed by Engr-in-charge.

Supply and fix for round/ square shape 15 Watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED batten with 22W LED tube light in wall /surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc., surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver and including LED tube rod complete all as specified and as directed by Engr-in-charge.

Supply and fix for double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, earth stud, din rail, polyamide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and polylayer for protection SP 240 volts 200 Amps rated bus bar 8 way double door openable, concealed on wall and including taking out old unserviceable MCB DB any size/type complete all as specified and as directed by Engr-in-charge.

Supply and fix for double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, earth stud, din rail, polyamide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and polylayer for protection SP 240 volts 200 Amps rated bus bar 4 way TPN DB double door openable, concealed on wall and including taking out old unseviceable MCB DB any size/type complete all as specified and as directed by Engr-in-charge.

Supply and fix for MCB SP 6 to 32 Amps rating 415 volts, 10KA, 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fix for MCB double pole RCBO 240 volts AC 40 Amps (B-series) of 100 MA complete all as specified and as directed by Engr-in-charge.

Supply and fix for MCB TPN 63 Amps rating 240V, 10KA, 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engr-in-charge.

Material and labour for wiring for circuits/sub main wiring with FRLS PVC insulate sheathed 3 x 10 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed suitable size PVC conduit with 10 sqmm PVC insulated green copper cable for continues earth PVC conduit pipe suitable for submain wiring a with all accessories complete all as specified and as directed by Engr-in-charge.

Material and labour for wiring for circuits/sub main wiring with FRLS PVC insulate sheathed 2 x 10 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed suitable size PVC conduit with 10 sqmm PVC insulated green copper cable for continues earth PVC conduit pipe suitable for submain wiring a with all accessories complete all as specified and as directed by Engr-in-charge.

Taking down into concealed ceiling fan and keeping in safe custody for reuse and reficing the same and refixing the same after duly painted and marking of MES number on ceiling fan of size 1200mm sweep complete with connected accessories complete all as specified and as directed by Engr-in-charge.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED recessed mounted 16W adjustable down light warm white /blue emission light with powder coated aluminium housing complete all as specified and as directed by Engr-in-charge.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 20 Amps complete all as specified and as directed by Engr-in-charge.

Material and labour for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25m below ground levels with top edge of the earth plate not less than 1.5m below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point or indicated including testing on completion complete all as specified and as directed by Engr-in-charge. Note: The unit rate includes for protection pipe and lead wire from top of earth plate up to 7.5m above ground level.

Supply and fix for switch piano single pole one way, 6 Amp (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for switch socket combination 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for switch socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and as directed by Engr-in-charge.

Supply and fix for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete with one single pole MCB 20 Amps complete all as specified and as directed by Engr-in-charge.

Supply and fix for surface and wall mounted LED batten of 20W with polycarbonate housing and integrated electronic driver having THD<20% complete all as specified and as directed by Engr-in-charge.

Supply and fix for recess mounting LED 2 x 2 luminaire white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover and conecting with ceiling rose complete all as specified and as directed by Engr-in-charge.

Supply and fix for replacement MCB SP 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 5 to 32 Amps, 'C' series complete all as specified and as directed by Engr-in-charge.

Supply and fix for replacement SPN 40 to 63 Amps 240 V 50 Hz 10 KA, confirming to IS 8828 complete all as specified and as directed by Engr-in-charge.

Supply and fix for replacement TPN MCB 415 V 50 Hz 10 KA confirming to IS 8828 of rating 40 to 100 Amps complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED recess mounted 200x200x36mm luminarie 22W fitting with accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED tube light fitting 2 x 20 Watt box type white/warm white, pendant type luminaries interconnectable luminaries for aesthetically appealing downlight application. Suspension of 1.5m is included (02 Nos) complete all as specified and as directed by Engr-in-charge.

Material and labour for wiring for circuits/sub main wiring with FRLS PVC insulated sheathed 4 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed PVC conduit with 4 sqmm PVC insulated green copper cable for continues earth with suitable dia of PVC pipe with all accessories complete all as specified and as directed by Engr-in-charge.

Material and labour for wiring for circuits/sub main wiring with FRLS PVC insulated sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed PVC conduit with 4 sqmm PVC insulated green copper cable for continues earth with suitable dia of PVC pipe with all accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix for double door MCB DB made out of 18 SWG CRCA steel sheets, phosphates powder coated with copper bus bar, earth stud, din rail, polyamide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box, ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+10 way double door openable, concealed on wall and including taking out old unserviceable MCB DB any size/type complete all as specified and as directed by Engr-in-charge.

Taking down exhaust fan, sealing cable end, dismentling blades and removing fan and blades to store complete all as specified and as directed by Engr-in-charge.

Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED building security light fitting with suitable size bracket/angle to fit security light of 60W IP 66 protection LED complete all as specified and as directed by Engr-in-charge.

Supply, fixing, jointing, connecting and testing in trenches XLPE /PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches/ ducts of the following sizes including taking out cable cover and cable complete all as specified and as directed by Engr-in-charge. 3.5 core 70 Sqmm

Excavation in trenches for not exc 1.5m wide and not exc 1.5m depth and getting out in soft/loose soil including taking out faulty cable/cable covers and GI pipe complete all as specified and as directed by Engr-in-charge.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and as directed by Engr-in-charge.

Removing excavated materials not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

Material and labour for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specified and as directed by Engr-in-charge. Note: Only punned thickness shall be measured for payment.

Supply and laying un-reinforced precast concret cable cover class LV type 1, flat size 250x150x40mm complete all as specified and as directed by Engr-in-charge.

Laying only un-reinforced precast concret cable cover class LV type 1, flat size 250x150x40mm complete all as specified and as directed by Engr-in-charge.

Material and labour for GI pipe light grade with all fittings complete laid in trenches all as specified for 50mm bore of pipe complete all as specified and as directed by Engr-in-charge.

Material and labour for point wiring with 1.5 sqmm (nominal area) FRLS PVC insulated and unsheathed multistranded copper conductor cable (using colour code as per IS) 1100 volts grade drawn through and including 20mm dia medium grade rigid PVC conduit (ISI marked) concealed on wall surface with all accessories including conealed sheet steel terminal / CI box with 3mm thick hylam/Masonite sheet top cover including 1. Sqmm size PVC insulated unsheathed copper conductor (using green colour) to common earth and connecting to earth dolly, complete all as specified & directed for the following :- One light / buzzer pont controlled by one switch 5 Amp, SP, one way 240 volts.

One fan/exhaust fan point controlled by one switch.

One 5 pin socket outlet 5 Amps on same board.

One 5 pin socket outlet 5 Amps on independent board.

All as per item No 123.00 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

All as per item No 123 above but with 4 sqmm (nominal area) for three phase and 4 sqmm PVC multi stranded FRLS copper conductor cable for earth continuity (green colour) for one power point complete all as specified & directed.

K N CONSTRUCTION