Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.3 L+₹84,353.80 (4.33%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹22.8 L+₹3.4 L (17.2%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹49,900
Closing Date
12 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHISIANA
GE (AF) BHISIANA PIN-151201
AS PER BOQ/PRICE SCHEDULE
2022_MES_568346_1
GE/BHI/T-54/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE (AF) BHISIANA
AS PER NIT/TENDER DOCUMENT
6 documents required · 6 mandatory
₹500
GE (AF) BHISIANA
₹49,900
Yes
22 Feb 2023
10 Dec 2022
14 Jan 2023
10 Dec 2022
12 Jan 2023
28 Dec 2022
13 Dec 2022 - 20 Dec 2022
Amount
Taking down cement plaster on brick walls, concrete surface, static water tanksetc etc including Rcking out joints hacking to key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge
M&L for Rendering on concrete/brick surfaces 15mm thick in CM 1:4 on fair faces of brick or concrete wall sufaces finished even and fair without using extra cement complete all as specified .
M&L for preparation new plastered surface of wall, concrete surface and applying two coats of all weather exterior emulsion paints in camouflaging pattren @1.43 litre/10 sqm over and including priming coats of exterior primer of same make applied @0.9 litre/10 sqm as per new sigma pattern generated by station authority and RGB value variation from 110 to 171 by using 4 to 5 colour shades as per approved pattern at a height n.exc 25 mtr as per sample approved by GE, complete all as specified and directed by Engineer-in-charge. (note: the % of the colour may change without any financial effect.) make: Berger (walmasta),Asian (Ace), Nerolac (suraksha plus)
M&L for Rendering 10 mm thick in CM 1:6 on concrete/brick wall surfaces finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for Preparation of newly plastered surface of walls & applying two coats of fire resisting paint over a coat of primer as per manufacturer instruction complete all specified and directed.
M&L for Preparation of Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper incl primer surface on plastered surface complete all as specified and as directed.
M&L for Rendering 5 mm thick in CM 1:3 on concrete surfaces finished surface even and smooth without using extra cement as in ceiling surfaces complete all as specified and directed.
M&L for Preparation of newly plastered surface of ceiling including cornices pilasters etc.and applying three coat of white wash on ceiling complete all as specified and as directed.
M&L for Rendering on concrete/brick surfaces 10 mm thick in CM 1:3 with water proofing compound on fair faces of brick or concrete wall sufaces of SWT finished even and fair without using extra cement complete all as specified .
Cleaning of SWT of any description and capacity , descaling, washing complete with soap solution and removing vegetation/spoil/silt from SWT incl removing of spoil out side of area as directed incl repair if required or applying water proofing solution as directed by Engr-in-charge & confirming to leak proof to the entire satisfaction of Engnr-in-charge. NOTE: Plaster and water proofing compound should be measure and paid seperately.
Supply only Integral waterproofing compound with Dr. Fixit Pidifin 2k for SWT treatment having Specific Gravity 1.65-1.75 confirming to BS 6920: part-1:2000,non toxic, coverage area approx-1.5 -2.0 kg/sqm @ 1mm thickness for 2 coats over entire surface,having water resistance 0.09 cm/km complete all as specified and directed.
M&L for 24 guage chicken wire mesh for plastering work at joints of wall & beam Rcc etc ,of 10 mm to 13 mm opening dia size, fix with nails,screws or supporting arrangement as required or as directed by Engineer-in-charge.
Demolition Brick Work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.
M&L Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 13 here-in-before) after removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.
M&L Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified.
M&L for Rendering 15 mm thick in cm 1:6 on brick surfaces finished even and smooth etc complete all as specified.
Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish outside MD land complete all as specified
M&L for Non Skid Ceramic tiles/ Non Skid tiles coloured, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as per the existing tiles and size as suitable/ matching with the existing tiles in floors including 15mm thick screed bed for laying tiles and jointed in Cement Mortar 1:6 slurry and pointed in white or coloured cement to match the colour of tile complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
M&L for glazed ceramic coloured tiles of size 450x300 x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.
Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed.
M&L for machine cut Kota stone slab flooring, 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.
M&L for coloured cement concrete chequered tiles 250x250x22 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 20mm thick screed bed to floor finishes in cm 1:4 complete all as specified and directed.
M&L for Sand cushion 50mm thick and well ramming including watering as required complete all as specified and directed.
M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.
M&L 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed.
M&L 75 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate finishing surface as in floor/ top surface/ finish surface all as specified and directed.
Demolition of cement concrete any description in any position not otherwise specifically provided for Complete all as specified and as directed by Engineer in Charge.
M&L Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs,mud stops, top of SWTs copping rounded PCC as in kerbs/covet fillet complete all as specified.
M&L 75 mm thick PCC 1:3:6 type C-1 as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.
Taking down steel rolling shutter any type with or without ball bearings as specified including top cover rods complete all as specified or directed.
S&F Steel rolling shutters, with out ball bearing, thickness of lath 1.0 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all specified and directed. NOTE: Quoted rate includes making good (including necessary formwork) the disturbed surface as per specification.
Dismantling structural steel work including doors, gates but excluding framed truss etc.
S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates confirming to Fe 410-W (Gde-E250 quality A) or as directed by Eng-in-charge
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E250 quality A) or as directed by Eng-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde-E250 quality A) or as directed by Eng-in-charge
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer in Charge.
S&F Rolled sections as Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths confirming to Fe 410-W (Gde-E250 quality A) or as directed by Eng-in-charge
Dismantling framed trusses exc 10 mtr but n.exc 15 mtr span, complete all as specified and as directed.
S&f Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde-E250 quality A) or as directed by Eng-in-charge
M&L Mild steel, plain, black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F in repair Mild steel, plain, black sheet 0.80 mm thick in wall cladding, weep holes cover and similar work, cut to size as per site requirement , holes punched; including round headed screws,clout nails or rivets as required and fixed to brick wall/rcc wall etc , including bending or turning up, mitred angles, etc. as required
Prepration of new surfaces of steel of any description not other wise described over 10cm width or girth and applying Two coats of synthetic enamel paint over a coat of redoxide primer all as specified
Easening of door exc 1 sqm but not exc 2 sqm each by making ajdustment to hinges planning the sides of doors including taking down of door and refixing if required complete all as specified.
All as per ser item No 46 above but not exc 1 Sqm each complete all as specified.
Repairs to PVC door shutter by making minor adjustment to hinges etc easening of shutter including taking down of shutter if required complete all as specified.
Repairs to steel gate by making minor adjustment to hinges etc easening of shutter including taking down of shutter,welding if required complete all as specified.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
M&L Elegant Tile made of perforated cement fiber composite 595x595/295X1195/595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed by engineer-in-charge. (Material shall be approved by GE), MAKE: Armstrong /Gyproc / Daiken & Hindustan Acoustic.
S&F of 12 mm thick perforated particle board / tiles for insulation and acoustic purpose, 600 X 600 MM size fixed with staples on snap grid as in ceiling complete all as specified and directed.
Dismantling of Asbestos cement (corrugated , semicorrugated , etc.) sheets as in roof coverings complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of in green colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenth of 550 Mpa as in roof covering/cladding to wall or as ridge,fixed with self tapping screws all as specified and as directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc.fixed with L type or J type hooks complete all as specified and as directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame), exc 1.5 Sqm but not exc 4 sqm each complete all as specified
Taking down shutter of any description exc 1.0 but n exc 2.0 sqm Sqm each complete all as specified
Taking down chowkhats or frame with shutter (without taking off shutter from the frame), not exc 1.5 Sqm each complete all as specified
S&F Factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified , shown on drawing and as directed .
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.
S&F stainless steel 100 mm butt hinges for PVC doors complete all as specified.
S&F in repairs 125 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.
S&F 30 mm thick Plain, framed, panelled shutters 2nd class hard wod (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.23 (a) of SSR Part-I, complete all as specified and directed.
S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified
S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified
S&F in repairs 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.
S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.
S&F in repairs 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
S&F in repairs mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.
M&L Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete, fixed in repairs, all as specified.
S&F in repairs Door closer hydraulically of aluminium extruded section body regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.
Supply and fixing box type steel windows/ ventilators glazed & gauged factory made with side hung shutters including box type hinges with steel handle and steel peg stay, supply and fixing Stainless steel wire cloth 1.14mm dia and 3mm thick glass fixing with putty and glazed pins and necessary grills and guard bars of 10mm squre bars with spacing not exc 125mm c/c complete and making good the disturbed portion with PCC or Plaster and painting the surface to match with the existing surface complete all as specified and as directed.
Taking down aluminium door shutter including floor door closer, removing glass with beading before taking down and refixing of glass, beading and floor door closer after replacing broken parts of aluminium shutter including easing of shutter complete all as specified.
M& L Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
M&L powder coated Anodised aluminium frame(minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.
S&f in repair mild steel Mortice lock, vertical type, size 100 mm 4 levers for aluminium doors complete with handle.
S&F in repair 12 mm Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed with screw to timber frame or shutter any thickness complete all as specified.
Supply and Fix sheet glass ordinary quality 4.8 mm thick in square exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads as directed.
Supply and Fix sheet glass ordinary quality 4.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.
All as per ser item No 83 above but exc 0.50 sqm in each pane complete all as specified.
All as per ser item No 83 above but 4 mm thick frosted on one side glass pin headed type complete all as specified.
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil etc for embankment of traverse walls and getting out complete all as specified.
Removing excavated material n.exc 250 mtr for screening of metal from soil and depositing where directed.
M&L for Forming embankments including raising (or lowering) earth, spreading in layers not exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., not exc. 4.50 m high from base with material obtained from item no 86 & 87 complete all as specified and directed by Engineer in charge.
Disconnecting existing tanks of capacity exe 250 ltrs but not exe 500 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).
Cleaning of over head tank RCC / PVC of any description and capacity exceeding 250 ltrs but not exceeding 500 litres, descaling, washing complete with soap solution and removing vegetation around the over head tank / plate form to the entire satisfaction of Engineer in charge including disconnecting, opening and reconnecting GI tubing & fittings as per site requirement complete all as specified.
S&F in repairs HDPE PVC lid (cover) for 500 ltrs capacity PVC tank complete all as specified.
S&F 15 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) Complete all as specified and directed by Engineer in Charge.
S&F Rotational moulded polythene water storage tank double layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.
S&F Rotational moulded polythene water storage tank double layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.
Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.
Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified.
M&L for refixing of steel old tubing 15 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified.
M&L for refixing of steel old tubing 20 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified.
S&F galvanised steel water tubes 'medium grade', 15 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed
S&F galvanised steel water tubes 'medium grade', 20 mm bore, with and including all GI fittings . fixed to walls, ceiling or laid in floors, complete all as specified and directed
M&L removing of bushes upto 10 cm dia trunk,grass from roof top,racking out joints/pointing to brick tiles and flush pointing with 1:3 CM with water proofing compound & making good complete all specified and directed.
M&L for preparation of old painted steel of any description not otherwise described ,over 10 cm width or girth and applying one coat of synthetic enamel paint as in danger board, fencing posts, struts,pipes, gates etc as per the approved colour and as per sample approved by GE complete all specified and dorected
M&L for preparation of old painted steel of any description not otherwise described ,over 10 cm width or girth and applying two coat of synthetic enamel paint as in danger board, fencing posts, struts,pipes, gates etc as per the approved colour and as per sample approved by GE complete all specified and dorected
M&L preparation for one coat of fire resistant paint on surfaces of any description wood,steel,iron,concrete surface, brick wall surfaces exc. 10 cm girth including preparation of old surface complete all as specified and directed.
M&L preparation for two coat of fire resistant paint on surfaces of any description wood,steel,iron,concrete surface, brick wall surfaces exc. 10 cm girth including preparation of old surface complete all as specified and directed.
M&L for writing letters or figures (block,roman,italic or indian) n exc 30 cm high by using fluorecent paint complete all as specified and directed by Engr-in-charge.
M&L for Preparation of new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and as directed.
M&L for Stops, commas, short lines, dashes, hyphens, brackets,by using fluorecent paint complete all as specified and directed by Engr-in-charge.
NOTE: Contractor Shall not Submitted any RAR/Bill where amount of Work Done in FH Item Exceeds Work done in FL Item till the time all FL Items have been Executed.
M/s Luxmi Constructions
M/s Vee Kay Associates
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .