Construction of Compound wall, Providing Foothpath and park arrangements at Ganapathy Ma Nagar 4th block reserve site in ward no.20, North zone

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Conveying the excavated earth and debries from the site to 15 km away the city limit as directed by the CCMC officials etc complete

Providing cast in situ cement concrete 1: 11/2 : 3 (one cement, one and half M.Sand and three coarse aggregate) using 20mm size HBBG metal for 23cm dia pile including cost of materials labour, hire charges for machinery for earth work for forming 23cm dia bore hole to the required depth before concreting excluding cost of steel reinforcement etc

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. (Sl.No.168)

Preparation of Mounds of various size and shape by availlable excavated/ Supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer - in - charge.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering for soffits of RCC slabs of planesurface like lintels, beams ,etc.,including strutting 3.60m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Supplying and Erecting Centering for sides and soffits including necessary supports and strutting upto 2.10M height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90 x 60 cm and 10 BG stiffened with welded mild steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50cm spaced at abote 90cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at not more than 75cm centre to centre etc., complete complying with the standard specification and as directed by the dept officers (Payment for centering shall be given after the concrete is laid)

Reinforced Cement concrete 1:1.5:3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.- Manual Mix (sl.no.155)

For Plinth beam

For columns

Supplying and filling the ground with good earth in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

Supplying and filling the foundation and basement with stone crusher dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

Supplying and filling the foundation and basement with M.Sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification

Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller. (HC-W0029 PD-1612 P.NO -269)

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:1.5:3 (One cement, Two M - sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II classground moulded bricks of size 9" X 4 3/8"X 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100CFT ( Sl.No 196 b)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved nonskitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (Sl.No.297)

White washing one coat with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc., complete complying with standard specification.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and Laying of 3x6 Sq.mm PVC armoured LTUG Cable as per std specifications etc complete M-2579

Supply,fixing and providing cable end termination of 3x6 Sq.mm PVC LTUG aluminium armoured Cable with necessary aluminium cable sockets by crimping etc with electrical connection complete SD 235

Supply, Erection of 4 Metre Length GI STEEL TUBULAR POLE FOR STREET LIGHT Double Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length etc., complete M-2116 PWD

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting etc., complete SD 532

Supply,delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 9 meters with IP 66 Female connector in one end suitable to connect with Male connector in the LED Fittings as per the direction of departmental officer

Supply and fixing of SP-40A,10KA MCB 240V 50Hz suitable for lighting circuit etc complete M-1762

Maintenance Free earthing with Copper rod of 17.2 mm dia and 3m length as per PWD standard etc complete M-2568

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos .32A fuse unit (500V) 32A neutral link and earthlink(1"x1/8"copperflat)on TW plank of size 600mm x450mm x19mm with supporting TW reepers of 1"thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EBmetert of use unit with 1No 40Amp 30MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection

Supplying laying and jointing of P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges

50 mm pvc pipes

20 mm pvc pipes

Supply of PVC specials of good quality etc complete

50 mm pvc elbow

50 mm pvc Tee

50 mm pvc coupling

50 mm pvc bend

50 mm pvc end cap

PVC Saddle 63 mm x 20 mm

15mm dia screw down tap

Ball valve (50mm) (Polypropylene with teflan seating)

Supply and fixing of slide with Ladder park model using 2Nos of 35mm dia MS.pipe of 14 SWG for standing and sliding, Platform sheet of size 0.45m x 0.90m made of S.S sheet of 16 SWG. Sliding sheet of size 2.40m x 0.45m made of fibre sheet of 14 SWG, and side rails for child to hold while. Climbing is made of 75mm x 25mm thick 14 SWG to a length of 4.50m for both sides. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of U-model twin sea saw four seater using 65mm dia M.S.pipe of 3mm thick to a length of 4.90m and supported assembly bars using 50mm dia M.S.pipe of 3mm to a length of 2.10 m each for 2 Nos. The four seater of circular type of 250mm dia S.S sheet of 16 SWG. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and Fixing of Two seater swing using 3m long 65mm dia M.S.pipe of 3mm thick. The Slide supports are 3m long 50mm dia M.S pipe of 3mm thick. The 3 way sockets using 3mm M.S.plate and grip the entire unit rigidly. Two swing clamp with ‘U’ and ‘S’ hooks are provided to the swing seat made out of 25 x 25 mm S.S square tube of 14 SWG with stain less steel plates of a grade 304 and size of 500mm x 250mm of 16 SWG and hooks are fitted with 8mm thick tested chain 2 Nos of length 9.80M. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of merry-Go-Round using M.S pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seater of 300mm x 360mm square of 2 mm length M.S sheet and arms are welded made out of 20mm dia M.S pipe and the supported pipe of size 32 mm dia square M.S.pipe of SWG to a length of 1.80m each. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of outdoor GYM equipments using MS pipes as directed by the departmental officers etc complete

Air Walker

Standing Triple Twister

Out Door Cycle

Dipping Bar

Dual Leg Press

Rowing Machine

Pull and Pushup Bar

Truffing of Korean grass / mexican grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.

Planting of Travellers palm ornamental foliage Specimen plant variety of height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. HC-W0161

Towards supply of Grown up Avneue Trees of 10’ feet height such as Tamrind, Neem, Pungam, Illuapai and Navai etc., including cost and conveyance to the site as directed by the departmental officer. Planting of trees by the road side in 0.50m dia pit and 1.00 m deep dug in the ground, mixing the soil with decayed farm yard/ sludge manure, backfilling the trench, watering, fixing the tree guard with Casurnia Poles and all other incidental charges etc., complete as directed by the departmental officers HW-W0119

Supply and fixing of ornamental Park benches of size 1.20m x 0.45m each for leg and rest. The seat using 100 mm x 25 mm M.S. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the Executive engineer before use on work.

Supply of Penguin and Monkey dustbin FRP – 2 Layers to a height of 3½ and width of 2½ etc., complete as directed by the departmental officers