GE/Token-12/2025-26

Amount

M&L for preparation of old decoreated external wall / internal wall/Ceiling surface of existing treatment by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible up to 8 storey bldg complete all as specified and all as directed by Engr- in-charge.

M& L for preparing the entire surface with applying 1 to 2 mm thick wall care putty on walls and ceiling surface finished even and smooth complete all as specified and directed.

M& L for preparing the entire surface with applying priming surface with alklai resistance priming paint on walls and ceiling surface finished even and smooth complete all as specified and directed.

M&L for external wall / Ceiling applying two coats of weather proofing exterior acrylic emulsion paint by spray gun/ spray machine up to 3 storey bldg complete all as specified and all as directed by Engr- in-charge. Notes for item Nos 3 & 4: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial Bid. (d) A guarantee amount of 2% of contract of work done for item Nos 3 & 4 of BOQ will be retained for 5 years of the completion of work.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guiniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. Note rate quoted up to G+8 bldg including scaffolding

M&L for preparation of old/new decoreated external wall surface by mechanised sander of Berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, again sand papering thus making surface smooth. and applying two coats of cement base paint on walls complete all as specified and all as directed by Engr-in-Charge . Note :- The prepration of surfaces stage shall be got approved from GE before applying the finishes. Note rate quoted up to G+8 bldg including scaffolding

M&L for prepration of old plstered surfaces of wall and applying two coat of white wash complete all as specified and all as directed by Engineer in charge .

M&L for Preparation of old/new painted surfaces of wood based surfaces of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying two coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed. Note rate quoted up to G+8 bldg including scaffolding

M&L for Preparation of old/new painted surfaces of steel of any description over 10 Cm width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed complete all as specified and directed. Note rate quoted up to G+8 bldg including scaffolding

Taking down cement plaster on brick walls, or stone walls / ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. Note rate quoted up to G+8 bldg including scaffolding

M&L for renderning 15 mm thick in CM 1:4 on any faces of brick/concrete surfaces finished even and fair with out using extra cement complete all as specified. Note rate quoted up to G+8 bldg including scaffolding

M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. Note rate quoted for G+5 bldg

M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed . Note rate quoted up to G+8 bldg including scaffolding

M&L for preparation of newly plastered surfaces and applying two coats of Oil bound distemper over one coat of wall putty on newly plastered surface over a coat of primer.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement incl scafolding etc, complete all as specified.

M&L for prepration of newly plstered surfaces of ceiling and applying two coat of white wash complete all as specified and all as directed by Engineer in charge .

Taking down rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends Note rate quoted up to G+8 bldg including scaffolding

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete. Note rate quoted up to G+8 bldg including scaffolding

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete. Note rate quoted up to G+8 bldg including scaffolding

S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed. Note rate quoted up to G+8 bldg including scaffolding

S & F 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed. Note rate quoted up to G+8 bldg including scaffolding

S&F in repairs PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement complete all as specified Make prince

S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified Make prince

S&F in repairs PVC (SWR) vent cowl of 110 mm bore

S&F in repairs PVC (SWR) vent cowl of 75 mm bore

Complete removal of existing old treatment on surface from walls with machenical scraper (machine) complete all as specified and directed.

M& L a coat of alkali resistant primerover alread prepred surface of walls complete all as specified and directed.

M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls/ ceiling surface finished even and smooth(internal surface) complete all as specified and directed.

M& L for applying two coats of oil bound distemper on wall/Ceiling surface with roller brush complete all as specified and directed.

M & L preparing old surface including washing, rubbing, filling holes,and uneven surface finishing old surfaces even and smooth with, and surface shoulld be even and smooth applying one coat of oil bound distemper on wall surfaces with roller brush of complete all as specified

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified

M&L for Plain, solid, straight chowkats and frames made of 2nd class hard (sal) wood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , complete all as specified and as directed by Engineer-in-Charge.

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type).

S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified(Fixing included in item 43 here-in-before).

S&F for 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete

S&F for MS 300mm size, door spring type rat tail rod pattern springs including roller and roller plate complete.

S&F for 100 mm size long mortice lock vertical type ,4 levers with key in duplicate, brass body with brass two nos handle fixed in shutters with screw complete all as specified Make- Harrison

Supply & fix two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge.

S&F for galvanized stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples including beading complete all as specified and as directed .

Hacking out old broken glass of any thickness size quality or description frame wooden frames /Aluminium frame fixed with wooden beads/aluminium beads and M&L 5.5 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, complete all as specified

S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I(Make : Sintex/Rotex/Polywell)

S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I(Make : Sintex/Rotex/Polywell).

Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame)

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded Complete all Specified and directed.

ditto- all as per Srl item No 48 above but without glazing bars

S&F for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165.

Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified.

M & L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified.

M&L for PCC( 1:3:6 ) type C-2 using 20mm graded stone as in padding on roof correction of slope and roof kerbs all as specified and directed.

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified land as directed.Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 15 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Fixing only 15 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified.

Taking up or down steel tubing 20 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S & F 20 mm bore, steel water tubing, medium grade, galvanized, with all fitting and fixed complete to walls and ceiling or laid into floor in repairs complete all as specified.

Fixing only 20 mm water tubes, any grade, to walls and ceilings or laying in floors in repairs complete all as specified.

M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Notes for item Nos 59: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial Bid. (d) A guarantee amount of 5% of contract of work done for item Nos 59 of BOQ will be retained for 5 years of the completion of work.

Disconnecting existing tanks of cap 1000 ltrs, setting aside (or lower ing if required) for repairs, cleaning, etc. and hoisting if required re- connecting and re-fixing in position and Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc Complete all as specified.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1 : 4 complete all as specified.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M & L for Non skid 600x600x8 to 8-9 mm thick coloured ceramic tiles as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height. complete all as specified directed by Engr-in-Charge, and approved by GE.

All as per item No 66 above but 8-9mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting on walls complete all as specified directed by Engr-in-Charge.

M& L for Non skid coloured ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge, approved by GE.

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel drapery Rod 25mm dia with 2mm thick, including wooden side caps, brackets, and rings @ 120mm c to c, complete all asspecified and directed.

Schedule of Credit

S D Constructions (BID ID -3314273)

M/S ANIL KUMAR (BID ID -3319957)

R. S. Associates (BID ID -3312716)

M/S SIMRAN CONSTRUCTION CO (BID ID -3314243)

imran construction company (BID ID -3314470)

M/S VERMA BUILDER (BID ID -3314515)