PROPOSED CONSTRUCTION OF ADMINISTRATIVE BLOCK & TRAINING FACILITY FOR LIMEBOARD AT INDI IN INDI TALUKA.

Ground Floor Estimate

Earth work in surface excavation by mechanical means for lowering & leveling

the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per d...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

ANTI-TERMITE TREATMENT

4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trench...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 8%

---- Charges with all lead and lift including other incidental charges wherever nece...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- Charges with all lead and lift including other incidental charges wherever necessary for successful compl...

Addendum I -Additionalities for formwork, Centering & Scaffolding " For Plinth Beams of Buildings " at 50%

---- Charges with all lead and lift including other incidental charges wherever necessary fo...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

---- Charges with all lead and lift including other incidental charges wherever necessary for su...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- Charges with all lead and lift including other incidental charges wherever necessary for successful comple...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

---- Charges with all lead and lift including other incidental charges wherever necessary...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45%

---- Charges with all lead and lift including other...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

---- Charges with all lead and lift including other incidental charges wherever necessary for su...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upt...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround do...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

Providing & Fixing of Mineral Fibre Suspended Ceiling System in the module size of 600x600x19mm with Exposed grid for Hospitals, Shopping malls, Commercial establishments and office complexes. The til...

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,

with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Supply of PVC pipe - OD 25mm and 10 Kg/sqcm

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer...

Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654)

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 20mm"

---- Charges with all lead and lift including other incidental charges ...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 25mm"

---- Charges with all lead and lift including other incidental charges ...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 32mm"

---- Charges with all lead and lift including other incidental charges ...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 20X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 25X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 32X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 20X1/2mm"

---- Charges with all lead and lift including other incidental charges w...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 25X1/2mm"

---- Charges with all lead and lift including other incidental charges w...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 32X1/2mm"

---- Charges with all lead and lift including other incidental charges w...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 20X1/2mm"

---- Charges with all lead and lift including other incidental charges whereve...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 25X1/2mm"

---- Charges with all lead and lift including other incidental charges whereve...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 32X1/2mm"

---- Charges with all lead and lift including other incidental charges whereve...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 20X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 25X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 32X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Polyethylene water storage tank with cover and suitable locking arrangement ( Vol.2, P.No .A- 30 I.No.622)

---- Charges with all lead and lift including other incidental charges wherever necessary fo...

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of wor...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1)"

---- Charges with all lead and lift including oth...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1)"

---- Charges with all lead and lift including oth...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion ...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2)"

---- Charges with all lead and lift includ...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647)

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and...

Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680)

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)

75 mm dia PVC...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)

110 mm dia PV...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

---- Charges with all lead and lift including other incidental charges wherever nec...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

---- Charges with all lead and lift including other incidental charges wherever necess...

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

---- Charges with all lead and lift including other i...

Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

---- Charges with all lead and lift including other incidental charges wherever ne...

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

---- Charges with all lead and lift including other incidental charge...

First Floor Estimate

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- Charges with all lead and lift including other incidental charges wherever necessary for successful comple...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

---- Charges with all lead and lift including other incidental charges wherever necessary...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45%

---- Charges with all lead and lift including other...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Roof slab of Buildings " at 50%

---- Charges with all lead and lift including other incidental charges wherever necessary for su...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround do...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door frames of cross-sections 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30mm thickness. The laminate shall be m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing & fixing of louvered ventilator made out of multi chamberedUPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...

Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including co...

Supply of PVC pipe - OD 25mm and 10 Kg/sqcm ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and as directed by the Engineer ...

Supply of PVC pipe - OD 32mm and 10 Kg/sqcm( Vol.5, P.No.A-44,I.No.654) ---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and ...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 20mm ---- Charges with all lead and lift including other incidental charges wh...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 25mm"

---- Charges with all lead and lift including other incidental charges ...

Supply of PPR Double Union Ball Valveconfirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Double Union Ball Valve 32mm ---- Charges with all lead and lift including other incidental charges wh...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 20X1/2mm ---- Charges with all lead and lift including other incidental charges where...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 25X1/2mm ---- Charges with all lead and lift including other incidental charges where...

Supply of PPR Male Threaded Elbow confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded Elbow 32X1/2mm ---- Charges with all lead and lift including other incidental charges where...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 20X1/2mm"

---- Charges with all lead and lift including other incidental charges w...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 25X1/2mm"

---- Charges with all lead and lift including other incidental charges w...

Supply of PPR Female Threaded Elbow confirming to IS 15801-2008

and DIN Standards 8077/8092

PPR Male Threaded Elbow 32X1/2mm"

---- Charges with all lead and lift including other incidental charges w...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 20X1/2mm"

---- Charges with all lead and lift including other incidental charges whereve...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 25X1/2mm ---- Charges with all lead and lift including other incidental charges wherever ...

Supply of PPR Male Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Male Threaded TEE 32X1/2mm"

---- Charges with all lead and lift including other incidental charges whereve...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 20X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 25X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Supply of PPR Female Threaded TEE confirming to IS 15801-2008 and

DIN Standards 8077/8092

PPR Female Threaded TEE 32X1/2mm"

---- Charges with all lead and lift including other incidental charges whe...

Providing and fixing brass stop cock of approved quality :15 mm nominal bore

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of wor...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :50 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.4.1)"

---- Charges with all lead and lift including oth...

Providing and fixing gun metal non- return valve of approved quality

(screwed end) :32 mm nominal bore Horizontal ( Vol.2, P.No.118- I.No.13.6.2.1)"

---- Charges with all lead and lift including oth...

Poly Propylene Random Co-polymer (PPR) pipe with fitting SDR 7.4 -50 mm Outer dia

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

600 mm long towel rail with total length of 645 mm, width 78 mm and

effective height of 88 mm, weighing not less than 190 g.(Vol.2, P.No.137 I.No.14.40.2)"

---- Charges with all lead and lift includ...

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :* 100 mm inlet...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Supply of PVC pipe - OD 110mm and 6 Kg/sqcm (Vol.5, P.No.A-44 I.No.647)

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work and...

Supply of PVC pipes of 8 Kg/cm2 for 75mm(0.917)( Vol.5, P.No.A-45 I.No.680)

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of work...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)

75 mm dia PVC...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments( Vol.5, P.No.117 I.No.10.9)

110 mm dia PV...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

13.31 Providing and fixing Chorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, including fixing th...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

13.17 Providing and fixing PTMT bib cock of approved quality and colour

13.17.4 15 mm nominal bore, 90 mm long,"

---- Charges with all lead and lift including other incidental charges wherever neces...

13.18 Providing and fixing PTMT stop cock of approved quality and colour 13.18.1 15 mm nominal bore, 86 mm long, weighing not less than 88 g

---- Charges with all lead and lift including other incide...

12.69 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

---- Charges with all lead and lift including other incidental charges wherev...

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

---- Charges with all lead and lift including other incidental charges wherever ...

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

---- Charges with all lead and lift including o...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

---- Charges with all lead and lift including other incidental charges where...

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

12.73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

---- Charges with all lead and lift including other incidental ...

Second Floor Estimate

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Columns " at 70%

---- Charges with all lead and lift including other incidental charges wherever necessary for successful comple...

Addendum II-Additionalities for formwork, Centering & Scaffolding " For Beams & lintels of Buildings " at 60%

---- Charges with all lead and lift including other incidental charges wherever necessary...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Chejjas, Canopy & Other Architectural projections of monor sections " at 45%

---- Charges with all lead and lift including other...

6.8 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)...

2.11 a Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joint...

12.13.1 Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete an...

12.15 Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldi...

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as p...

8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement...

8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture ...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

8.30 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) wit...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.

---- Charges with all lead and lift including other incidental charges wherever nec...

12.58 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

---- Charges with all lead and lift including other incidental charges wherever ...

12.65 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.

---- Charges with all lead and lift including o...

12.61 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

---- Charges with all lead and lift including other incidental charges where...

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary scre...

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

---- Charges with all lead and lift including other incidental charge...

Furniture Estimate

Peacock Chair:(Standard Company)Seat,and Back half cushion with cloth or Rexin

---- Charges with all lead and lift including other incidental charges wherever necessary for successful completion of ...

Teak Wood- Revolving chair : Chair upper construction seasoned teak wood with melomin polish, stainless steel 5 caster wheel legs, Hydraulic height adjustment. The chair shall be neatly finished and p...

Side table for teak wood Executive table - Of size 36"x20". Teak wood Leg size 2"x2" with support patties of 2"x1.25". Covered 3 sides with 12mm ply with Veneer . Table to be provided with one Keyboar...

Wooden Rack : (Teak Wood) 6' x 3' x20"". Made out of teak wood frame of section 2.25""x2.25"" and supporting

patties of thickness 3""x1.25"". Panel to be made out of 8mm plywood with veneer on the out...

Computer Work Station of size 4' x2' per person : Providing and fixing of straight line work station. Made out of 18mm ply with 1mm laminate or 18mm PLPB. Each work station should be of size 3'x2'. (W...

Notice Board: Of size 4'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outersid...

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply packing internally finished with enamel ...

Computer Chair : Stainless steel base ABS seat and back cushion with arm Hydraulic Height adjustment.

---- Charges with all lead and lift including other incidental charges wherever necessary for suc...

Office Table : Osize 4'x2.5' made out of 12/18mm MDF one keyboard and 3 drawers on right side. Table to be covered with 1mm laminate whereever visible. Hardware of the drawer should be telescopic chan...

eak Wood "C" Model Sofa Set : 1+3+1 with Teapoy and cushion. Made out of Teak wood Front leg 4"x4". Back leg 3"x3", back leg support patti 3"x1.25" with bend. Sofa front side bars 3"x1.25". Handle 3.5...

Teak Wood Side Teapoy : Size 1.3/4' x1.3/4 ' x1.5' made out of 2"x2" legs 2"x1.1/4" and 3"x1.1/4" side bars. Top with 8mm glass & reapers shelf with polish.

---- Charges with all lead and lift includ...

Teak Wood Table : Of size 6'x3'. Leg size 2.5"x2.5". Table frame to be 4"x1.25" thick pattis. Foot rest to be provided with 2"x1.5"=2 Nos. Table top to be laminated with 1mm thick laminate with teak e...

Teak Wood Officer Table : (Accounts Officer Table) Of size 7'x3'x30". Made out of 2.25"x2.25" Teak Wood legs. Table upper side patti 4"x1.25" and lower side 2"x1.25" and 12mm Commercial ply with 1mm l...

Providing and Fixing Veneer Paneling over the 50mm x 35mm sal wood frame work and top covered out of 4mm thick approved veneer fixed over 12mm ply finished in melomine polish, complete including cost ...