REPAIR/MAINT OF E/M INSTALLATION AND REPAIR/REPLACEMENT OF CERTAIN E/M WORKS OF INTERNAL WIRING AND CONNECTING WORKS AT MFFR UNDER GE N BIKANER.

Amount

Taking down carefully existing unserviceable Copper/aluminum batten/surface conduit/concealed conduit point wiring (light, fan, bell/buzzer, socket or power) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, pendents, sockets, lamp holders, shades, fan regulators, light fittings, bells etc (including old MS sunken boxes) and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and as directed by the Engr-in-Charge.

Taking down of unserviceable DBs/switch fuses/changeover in sheet steel enclosure complete with MCBs/Fuse/grips any capacity and removing from site and making good disturbed surface of wall, floor etc. Taking after disconnecting all cable complete all as specified and as directed by the Engr-in-Charge.

M&L Point wiring with stranded copper conductor cable, 1100 volts grade (ISI marked) PVC insulated and unsheathed of size 1.5 Sq mm single core in and including surface PVC conduit/casing capping/concealed conduit Medium class 20mm dia ISI marked with all fittings such as tees, bends etc terminating in MS sunken box/wooden box/PVC box ( As site requirement) covered with and including 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ for one fan or light or 5Amps socket or exhaust fan or bell/buzzer point controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed copper conductor cable, single core as earth wire to common earth & connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 here-in-before but socket point on the independent board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 3 here-in-before but socket point on the same board with other switches complete as specifed as directed by Engineer - In - Charge

All as per item No 3 here-in-before but cable of 2.5 Sq mm for 15 Amp switch socket outlet on independent board including provision of 2.5 Sqmm PVC insulated unshethed multistranded copper conductor as earth wire

All as per item No 3 here-in-before but for one light point control by two way switch complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement LED T5 Batten lightening fixture, energy efficent 18/20 Watt ( 4 feet) complete all as specified and directed by engineer-in-charge

S&F in replacement Decorative ultra slim linear LED T5 Batten lightening fixture, Eco friendly energy efficent 10/12Watt (2 Feet) complete all as specified and directed by engineer-in-charge

Supply & fix in replacement LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge.

S&F in replacement lamp holder PVC/Poly carbonate body with back plate complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Switch piano Single pole 5 Amps, two way, complete all as specified and as directed by Engineer-in-Charge

S&F in replacement switch piano flush type, Single pole 5 Amps, one way, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of socket outlet flush type, 3 pin, 5 Amps, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of switch piano flush type, Single pole 15 Amps, one way, complete all as specified and as directed by Engineer-in-Charge

S&F in replacement of socket outlet flush type, 3/5 pin, 5/15 Amps, complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge

S&F in replacement Recessed mounting LED 2x2 luminaire type :- make: CG / Phillips / GE / Wipro / Havell's/Bajaj

Supply and Fixing in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in replacement MCB 63 Amps, 440 Volt AC supply Triple pole with neutral(TPN) C curve with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Bell Ding dong AC single pole 230 volts complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Bell push button Piano flush type single pole 5 Amps complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement sub main wiring in PVC conduit/casing-capping with 2 single core 6 sqmm multi-stranded PVC insulated cable unsheathed 1100 volts grade with one earth wire of 6 sqmm copper conductor cable connected to common earth and earth dolly complete and including PVC Cassing and Capping all as specified and as directed by Engineer-in-Charge.(Note two run of 6 sqmm and one run of 6 sqmm will be measured as 1 RM.

All as per item No 25 above but of size 4 sqmm and earth wire of 4 sqmm complete all as specified and as directed by Engineer-in-Charge.

All as per item No 25 above but of size 2.5 sqmm and earth wire of 1.5 sqmm complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Sheet metal enclosure for distribution boards flushed in wall Double door suitable for fixing MCBs 240 volts with 200 Amps rated bus bar,SPN 12 ways, including taking down of old unsv DB,s and making good the disturbed surface of wall,and blanking plate as reuired complete all as specified and as directed by Engineer-in-Charge. Note : cost of cutting/chasing of wall and making good disturbed surface deemed to be included in the rate

Ditto all as per item above -28 but for 8 way SPN complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per item above -28 but for 4 way SPN complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement single pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20Amps capacity complete all as specified and directed by Engr-in-charge

S&F in replacement Decorative wall / surface light fixture made up of Polycarbonate, suitable for retrofit 9/11 W LED lamp Complete all as specified and directed by Engr-in-charge. Sample as approved by Engr-in-charge

Supply in replacement of LED bulb of capacity 9 watt complete all as specified and directed. Make Havells/Philips/polycab.

Taking down switch boards / fitting / fixture , identify and rectify the complaints pertains to internal electrification of any type and nature of temp/permt OTM Accns such as rectification of faulty electric circuit , tightening of loose wiring/ conduits replacement of defective accessories such as any type switch, socket, ceiling rose, Pvc Board and conduit, lights , MCB any type , holders, wire etc. shall be measured and paid separately. Cost of minor stores , such as screws, clamps, washers, insulation tapes, nut , bolts etc. shall be deemed including in the quoted rate. ( Note . If the contractor fail to rectify the defects mentioned in the complaint slip on within 48 hrs,. he will be charged Rs. 100/- per complaints/ per day and same will be recovered from his RAR . Note for Serial Items No:- :- 34 to 65 ( Fixing in this Job only) The contractor / his rep will collect the complaint from complaint cell ( Concerned JE E/M) every day at 9.00 AM and rectify the complaints 48 hrs and deposit the complaint slip ( duly signed by the users ) to concerned JE E/M.

Supply in replacement LED T5 Batten lightening fixture, energy efficent 18/20 Watt ( 4 feet) complete all as specified and directed by engineer-in-charge

Supply in replacement LED bulk head ,09W / 10 W, IP65 diacast aluminium housing powder coating finished complete all as specified and directed by Engineer-in-charge.

Supply in replacement lamp holder PVC/Poly carbonate body with back plate complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement switch piano flush type, Single pole 5 Amps, one way, complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement of socket outlet flush type, 3 pin, 5 Amps, complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement of switch piano flush type, Single pole 15 Amps, one way, complete all as specified and as directed by Engineer-in-Charge

Supply in replacement of socket outlet flush type, 3/5 pin, 5/15 Amps, complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement of ceiling fan regulator electronic type, 230 Volt, 150 Watt with 5 step of control including making holes in laminated bakelite sheet cover and connection complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement of ceiling rose PVC/poly carbonate insulated body three terminal ISI marked, complete all as specified and as directed by Engineer-in-Charge

Supply in replacement PVC Copper conductor cable 2.5 Sqmm x 02 core for suitable service coonection complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement PVC Copper conductor cable 4.0 Sqmm x 03 core for suitable service coonection complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement Rigid non-metallic PVC conduit of size 20/25 mm dia ( as per site requirement) inclusive of all tees, bends,elbows,juction box, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and as directed by Engineer-in-Charge

Supply in replacement PVC casing caping 20/25 mm dia ( as per site requirement) inclusive of all tees, bends,elbows and fixing accessories such as couplers, lock nails, etc. all as specified and as directed by Engineer-in-Charge

Supply in replacement PVC box/ wooden box with sunken box of any size and make as per site requirement " includng 3 mm thick new bakelite laminated sheet top cover ‘Hylam’ suitable for one switch and socket of capacity 5/15Amps all as specified and as directed by Engineer-in-Charge

Supply in replacement PVC flexible pipe of size 20/25 mm dia ( as per site requirement) including PVC clamp etc. complete all as specified and as directed by Engineer-in- Charge.

Supply in replacement Switch socket combination 2 in 1, 5 A flush type complete all as specified and as directed by Engineer-in- Charge.

Supply in replacement Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engineer-in- Charge.

Supply in replacement MCB single pole, 240 volts of rating 6-32 Amps of C curve breaking capacity of 10 KA complete all as specified and as directed by Engineer-in-Charge.

Supply in replacement MCB suitable for 6 to 32 Amps, 240 Volt AC supply C Curve single pole and neutral(SPN) with over load and short circuit protection having rupturing capacity not less than 10 KA complete all as specified and as directed by Engineer-in-Charge.

Supply only PVC insulation tape for day by day complaint /maintenance all as specified and as directed by Engineer-in- Charge.

S&F in replacement Modular switch 1 way 6A, 1 modul complete all as specified and as directed by Engineer-in-Charge

S&F in replacement Modular switch 1 way 16A, 1 modul complete all as specified and as directed by Engineer-in-Charge

S&F in replacement Socket, 6A - 2/3 pin combined 2 modul complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement Socket, 16A - 2/3 pin combined 2 modul complete all as specified and as directed by Engineer-in-Charge

S&F in replacement Fan step regulator, 120W - 2 module complete all as specified and as directed by Engineer-in-Charge

S&F in replacement White cover plate with frame, 1 modul complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement White cover plate with frame, 2 modul complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement White cover plate with frame, 3 modul complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement White cover plate with frame, 4 modul complete all as specified and as directed by Engineer-in-Charge

S&F in replacement White cover plate with frame, 6 modul complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement White cover plate with frame, 8 modul complete all as specified and as directed by Engineer-in-Charge.

REPAIR TO GEYSER Taking down and opening of the geysers 25/35/50 ltrs capacity any make complete for inspection descaling by chemical treatment of internal parts such as steel inner tank, siphon assembly, heating element, etc re-assembling and refixing the same to its original position after testing on pressure complete all as directed by the Engineer-in-charge. Note :- Items such as glass wool, steel inner tank, siphon assembly etc if found unserviceable under above item will be measured and paid for separately under its relevant item .Note for Serial Items No:- :- 73 to 82 The contractor / his rep will collect the complaint from complaint cell ( Concerned JE E/M) every day at 9.00 AM and rectify the complaints 48 hrs and deposit the complaint slip ( duly signed by the users ) to concerned JE E/M. Note :-If the contractor fail to rectify the defects mentioned in the complaint slip on within 48 hrs,. he will be charged Rs. 100/- per complaints/ per day and same will be recovered from his RAR

Supply and fixing in replacement steel inner tank/glass lined tank ( as site requirement) for capacity of geyser 25 ltrs as per existing size and shape.

Supply and fixing in replacement siphon assembly suitable for 25 ltrs Geysers, with rubber washer of suitable size.Make : Marc/Bajaj/Polar or equivalent

Supply and fixing in replacement glass wool insulation material

S&F in repair hot water pipe 15 mm bore 60 cm long with brass unions one(Chromium plated) one on each side. Pipe shall be as per I.S for 15 mm bore of pipe for 25/35/ 50 ltrs capacity Geysers.

Supply and fixing in replacement steel inner tank for capacity of geyser 35/50 ltrs as per existing size and shape.

Supply and fixing in replacement siphon assembly suitable for 35/50 ltrs Geysers, with rubber washer of suitable size.

S&F in repair Thermostat switch I.S.I marked, to Geysers 25/35/50 ltrs of any make / size and shape as per site requirement

S&F Low density polythene pipe (LDPE) connection arrangement with pipe of pressure rating 2.5 kgf/cm2 , 15 mm bore 30 cm to 45 cm long with brass unions one(Chromium plated) one on each side in repair to Geysers 25/50 ltrs. Pipe shall be as per I.S.I

Supply and fix in replacement heating element of rating 1.5 KW capacity including washers for 25/35 ltrs capacity Geysers.Make :- “Marc/THETA/ ALERT”

Supply and fix in replacement heating element of rating 2.0 KW capacity including washers for 50 ltrs capacity Geysers.Make :- “Marc/THETA/ ALERT”

Supply and fix in replacement Indicator lamps as per existing type having red or green coloured reflector all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement flexible, 3 core PVC insulated copper conductor cable of size 40/0.0076 with over all PVC insulation ISI marked.

Supply and fixing in replacement plug top, 3 pin 15 Amps, including making necessary connections all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement pressure release valve suitable for 15 mm bore of pipe for 25/ 35/50 ltrs capacity Geysers.

Supply & fixing in replacement bib cock cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply and fixing in replacement stop cock cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply only multistranded copper conductor of size 1.5 Sqmm single complete all as specified and as directed by engineer-in-charge Make :- Polycab/Havells/Finolex

Supply only multistranded copper conductor of size 2.5 Sqmm single complete all as specified and as directed by engineer-in-charge Make :- Polycab/Havells/Finolex

Supply only multistranded copper conductor of size 4 Sqmm single complete all as specified and as directed by engineer-in-charge Make :- Polycab/Havells/Finolex

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by mean of GI wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing the same upto 30 cm above normal ground level with plug at top including pipe fittings etc complete and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point complete including necessary excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50 m all as specified as shown in electrical plate No 3 SSR Part-I.

Dismantling posts or struts (RCC or steel) any section , including taking out embedded portion and making good disturbed ground complete all as specified.

Dismantling fencing wire , any type complete.

Excavating in post holes (or similar holes) in loose/soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm ,watering and removing surplus soil to a distance not exceeding 50m and making good surface complete.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete.

M&L for Mild steel work for posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete.

Supply only chain link mild steel galvanized fencing, any type or size complete.

S&F Mild steel bars 10mm dia & over, cut to length, bent to shape requred, including cranking, bending spirally for hooping for columns, hooking ends and binding with and inc mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of enamel paint over & including a coat of aluminium red oxide primer complete.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 80mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed complete.

S& F Framed work as in Decorative doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Demolition of brickwork built in cement or cement lime mortar complete.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

Taking down cement plaster/terrazo finish on brick or stone walll etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

M&L for Brick work with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.

M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even complete.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted complete all as specified.

Complete removal of existing treatment on wall and preparing the surface applying two coats of cement base paint all as specified and directed.

Preparing old decorated surface plastered or unplastered by brooming down etc. and applying one coat of cement base paint on wall including cornices pilasters etc.

M&L for 75 mm thick pcc (1:4:8) type D -2 using 40 mm graded stone agg as in sub base laid in altennate bays finished even and rough complete all as specified.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using grey cement and pigment complete all as specified.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade using grey cement and pigment complete.

M&L for Bricks, sub class B, laid flat, Bedded and Add if, dry and jointed in jointed mortar pointed in and pointed are 1:3 cement in cement used in floors, old size brick complete all as specified.

M&L for 25mm thick sand cushoning under inter locking tiles including spreading and levelling complete.

M&L for broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate in ]\ floors and paving, laid in panels and finished even & smoth without using extra cement complete.

M & L Non - skid Ceramic tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors for garden / porch area etc. set and jointed in neat cement slurry under 15 mm screed 1:6 mortor and pointed in white or coloured cement to matc complete all as specified.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L Preparing old decorated surface plastered or unplastered by brooming down etc. and applying one coat of white wash on walls including cornices pilasters etc complete all as specified.

M&L Preparing old distempered surface of walls including cornices pilasters etc and applying one coat of distemper oil emulsion white or tinted as directed by E.I.C

M&L Preparation of old painted surface of wood or wood based material over 10 cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified.

M&L Preparation of old painted steel surface over 10 cm width or girth of any description & applying one coat of synthetic enamel paint complete all as specified.

M&L Preparing old decorated surface of walls including cornices pilasters etc and applying one coat of cement base paint white or tinted as directed by E.I.C

Complete removal of existing tratment of wall including cornices, pillasters etc by scraping down with electric sanding machine and applying white wall care putty for filling the undulation of wall and finished with two coats distemper oil emulsion, white or tinted complete all as specified and as directed by Engineer-in-Charge

M&L Preparing old decorated surface t of wall including cornices, pillasters etcand the undulation of wall and finished with two coats of cement based paint, for height above 5 mtr and below 15mt for OHT white or tinted complete all as specified and as directed by Engineer-in-Charge

M&L Preparing old decorated surface of wall including cornices, pillasters etc and the undulation of wall and finished with two coats of cement based paint, for height above 15mtr and below 30 mtr oHT white or tinted complete all as specified and as directed by Engineer-in-Charge

M&L Preparing old decorated surface of wall including cornices, pillasters etc and the undulation of Ceiling and finished with two coats of cement based paint, for height above 30mtr and below 35 mtr white or tinted complete all as specified and as directed by Engineer-in-Charge

Complete removal of existing tratment of wall using electric sanding machine including cornices, pillasters etc by scraping down and applying and finished with two coats of cement based paint,in camouflage pattern in any shape and of bldg above ground level complete all as specified and as directed by Engineer-in-Charge

V.K. Infra Engineering

M/s Shubham Enterprises