PROVISION OF RCC DRAIN WITH RCC COVERING OF MONSOON DRAIN AT AF STN GWALIOR

Amount

Excavating over areas, n exc 1.5m deep and getting out in soft/ loose soil complete all as specified and directed.

Excavating over areas, exc 1.5m deep and but not exc 3.0m deep and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m in width and not exc 1.5 m in depth for foundation, etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation of drain including haunching and benching to sides of hume pipe etc complete all as specified and directed.

M&L for Pre-cast cement concrete (M-25) block masonry with solid blocks not exc 0.18 sqm surface area & minimum thickness of PCC block in 150mm (using 20mm graded crushed stone aggregates) and setting in CM 1:4 and flush pointing in CM 1:4 complete all as specified and directed.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregate) as in foundation including rafts, footings, plinth beams, and mass concrete etc. complete all as specified and directed. Note : Reinforcement & formwork will be measured & paid separately under respective item of BOQ.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressumemers, lintels over 1.5 m span complete all as specified and directed. Note : Reinforcement & formwork will be measured & paid separately under respective item of BOQ.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, post and struts etc. complete all as specified and directed. Note : Reinforcement & formwork will be measured & paid separately under respective item of BOQ.

M&L for reinforced cement concrete M-25 (design mix) (using 20 mm graded crushed stone aggregate) of precast cover slab of size (2090mm x 450mm x 150mm) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick, 250mm wide plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and directed. Note : PVC fillets and PVC strips are deemed to be included in quoted rates.

M&L for flat formwork square, rectangular to sides of pillars, posts, struts, piers, columns and stanchions and similar work, finished rough surface of concrete complete all as specified and directed.

M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for formwork to sides of concrete foundations, in footings and similar work in rough finished surfaces concrete complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over grade Fe-500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per item no 14.00 here-in-before but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete etc all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc. 6.00 m mean radius built in CM 1:4 complete etc all as specified and directed.

Material and Labour for rendering 15 mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing, cement concrete in Type B-0 1:2:4 (using 12.5mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete etc all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Taking out underground live/serviceable cable of any grade, type, class of size of 35 to 50 Sqmm 3.5/4 core for re-use or removal from site of work all as specified and as directed by Engr-in-charge. (Note -Excavation and earthwork shall be measured and paid separately)

All as per item No-21.00 here-in-before but size ranging from 95 Sqmm to 150 Sqmm 3 core/3.5 core LT/HT cable all as specified and as directed. (Note -Excavation and earthwork shall be measured and paid separately)

Supply, laying , jointing & testing 11 kV (Earthed) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 11000 Volts (Earthed) conforming to IS 7098 (Part-II) 1985 amended upto date having cross sectional area 95 sqmm 3 core complete all as specified and directed. Note :- Excavation, earthwork and sand cushioning for cable and cable protection cover shall be measured and paid separately under relevant schedule 'A' items.

Supply, laying , jointing & testing 11 kV (Earthed) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electirc power cable (heavy duty) with aluminium conductor, 11000 Volts (Earthed) conforming to IS 7098 (Part-II) 1985 amended upto date having cross sectional area 185 sqmm 3 core complete all as specified and directed. Note :- Excavation, earthwork and sand cushioning for cable and cable protection cover shall be measured and paid separately under relevant schedule 'A' items.

Material and Labour for Cable jointing kit for 11 kV (Earthed grade) for Straight through heat shrink type joint with end termination joint suitable for following sizes complete all as specified and directed. Note :-(i) All Necessary T&P, Blow lamp, HT Megar, etc. if required shall be arranged by the Contractor.

50 Sqmm to 95 Sqmm, 3 core

120 Sqmm to 185 Sqmm, 3 core

Supplying, fixing, jointing and testing for provision of straight through joints Heat shrinkable type, suitable for XLPE, LT Cable, 1100 Volts grade, from 50 Sqmm to 185 Sqmm, 3.5 core complete all as specified and directed.

Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed by Engineer-in-Charge. Note:- For measurement purpose punned thickness shall be considered as per clause 19.75 of SSR Part-I.

Supplying & Laying un-reinforced factory made, pre-cast flat concrete cable protection cover of class LV, type I, size 250mm x 150mm x 40mm, complete all as specified and directed by Engineer-in-Charge.

Supplying & Laying un-reinforced factory made, pre-cast flat concrete cable protection cover of class HVP, type 1, size 300mm x 180mm x 40mm, complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing LT 1100 volt grade XLPE insulated, screened, PVC bedded, galvanised steel strip armoured, electric power cables (heavy duty) with stranded aluminium conductor, of following sizes confirming to is 7098(part-I) amended up to date including fixing accessories for laying on wall/ roof/mild steel structure ,laid in trenches/ducts, floors etc complete all as specified and directed. Note:(i) Lugs/Glands/saddles of suitable size required for fixing of cables in panels/ junction boxes /on walls shall be included in the quoted rate of item.(ii) Cable path indicators shall be provided at every 50Mtr intervals of the cable and is deemed to be included in the item. (iii) Excavation, earthwork and sand cushioning for cable and cable protection cover shall be measured and paid separately under relevant schedule 'A' items.

35sqmm X 3.5 core

50sqmm X 3.5 core

120sqmm X 3.5 core

185sqmm X 3.5 core

Relaying, jointing and testing of serviceable XLPE/ PVC insulated, armoured, heavy duty, aluminum conductor cable 11000/1100 Volts grade of any description (retrieved from Ser item No 21 & 22 here-in-before, after thorough inspection of cable), laid in trenches/ ducts, floors, fixed to walls etc. complete all as specified and directed of the following sizes:-

(a) 35 to 50 Sqmm, 3.5/4 core

(b) 95 to 185 Sqmm, 3/3.5 core

Excavating over areas, exc 3.0m deep and but not exc 4.50m deep and getting out in soft/ loose soil complete all as specified and directed.

M & L Reinforced concrete pipes 600mm dia, NP3 laid and jointed complete with collars all as specified and directed.

RAVINDRA SALES

ATUL CONSTRUCTION CO.

JEE JEE BUILDERS

M/s Kohli Builders

Deepesh Electricals

Raja enterprises