Tender ID

DEFPROC

Active

Works

Electrical and Maintenance Works

REPAIR MAINT OF TRANSFORMER HT OH LINES AND ITS ALLIED SERVICES AT MIL STN LEKHAPANI UNDER GE DINJAN NO 2

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE DINJAN NO 2 | Tinsukia, Assam

Amount: ₹22 LCloses: 12 Nov 20263 Nov 20262d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published15 Oct 2026
Submission Opens7 Nov 2026
Closes12 Nov 20263 Nov 2026
Bid Opening19 Nov 202610 Nov 2026

Corrigenda

Corrigendum

2 updatesLatest on 3 Nov 2026Submission Ends:3 Nov 202612 Nov 2026

Date changes

Download Ends3 Nov 202612 Nov 2026Submission Starts29 Oct 20267 Nov 2026Submission Ends3 Nov 202612 Nov 2026Bid Opening10 Nov 202619 Nov 2026

Tender Value

₹22 L

EMD Value

₹44,000

Closing Date

12 Nov 2026, 6:00 pm2d left

Tender Inviting Organisation

Name

CWE DINJAN

Address

COMMANDER WORKS ENGINEER DINJAN

Work Description

REPAIR MAINT OF TRANSFORMER HT OH LINES AND ITS ALLIED SERVICES AT MIL STN LEKHAPANI UNDER GE DINJAN NO 2

Tender Information

Tender ID

2026_MES_794089_1

Reference Number

84587/E8

Tender Type

Open Tender

Product Category

Electrical and Maintenance Works

Form of Contract

Item Rate

Period of Work

180 days

Location

GE DINJAN NO 2

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER TENDER DETAILS

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of DD for EMD OR EMD exception undertaking for unenlisted bidder/ enlistment letter (.pdf)

RequiredScanned copy of application for issue of tender and scanned copy of DD for tender fee (.pdf)

RequiredScanned copy of other eligibility documents required as per tender and NIT (.pdf)

RequiredScanned copy of details as per clause B (iv) of Appx A to NIT for unenlisted contractors (.pdf)

RequiredScanned copy of residual work in hand for one/two class below eligible class contractors as per NIT (.pdf)

RequiredScanned copy of documents in support of GST Registration Number (.pdf)

RequiredScanned copy of Proof of possession of Provident Fund Code Number and ESIC (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE DINJAN NO 2

EMD Fee Amount

₹44,000

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

12 Nov 2026

Published

15 Oct 2026

Bid Opening

19 Nov 2026

Download Starts

15 Oct 2026

Download Ends

12 Nov 2026

Submission Starts

7 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (48 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	M&L for steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP- 55,11 metres long including erection, painting with two coat of synthetic enamel paint over a coat of red oxide or primer complete including taking down old unserviceable complete all as specified. Note Excavation earth work and PCC paid and measured seperately)	4	Each	-	-
2	M&L for cross arms, bracings, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, drilling holes for bolts in any shapes or size all as directed & painting of one primer coat and under coat and one finishing coat including taking out unserviceable material complete all as specified and as directed by Engineer-in-Charge.	3	Qtl	-	-
3	M&L for stay assembly complete with accessories as shown in elect plate no- 1 of SSR for dia of stay rod 20 mm incl GI stay strand of size 7/3.15 mm (maximum length 11.00 mtr) to keep the pole in vertical position incl loop insulator stay all as specified and directed including dismantling and taking out old unsv stay assembly set complete (PCC will be measured and paid separately)	2	Per Set	-	-
4	Supply and laying armoured HT UG cable XLPE insulated heavy duty electric cable with aluminium stranded conductor, 11000 volts grade (earth grade), cross sectional area 3 core 95 sq mm including taking out old unserviceable AB/UG cable/ OH conductor all as directed.	320	RM	-	-
5	M&L for Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for taking out/for laying under ground cables/pipes etc and getting out any type soil all as directed	104	Cum	-	-
6	All as per item No. 5 here-in before but depth exceeding 1.5 mtr and not exceeding 3 mtr.	1	Cum	-	-
7	M&L Returning filling in including spreading, levelling, watering and well ramming in layers n-exc 25 cm	44	Cum	-	-
8	M&L Removing excavated soil to a distance n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point	61	Cum	-	-
9	Supply and spreading fine river sand in trenches for cushioning of under ground cable/filling cable ducts all as directed by Engr-in-Charge at site Note : - Only punned thickness shall be measured for payment purpose	20	Cum	-	-
10	Supplying and laying un- reinforced precast concrete cable cover, class HV, Type 1, flat, size 300mmx 180mm x 40mm complete all as specified and directed	1,400	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.25 MB

Work Item Documents

TenderDocuments.pdf

Tender Documents • 0.97 MB

BOQ_890588.xls

BOQ • 0.28 MB

Corrigendum Documents

Amendment2.pdf

PDF • 0.07 MB

Amendment1.pdf

PDF • 0.07 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

M&L for steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP- 55,11 metres long including erection, painting with two coat of synthetic enamel paint over a coat of red oxide or primer complete including taking down old unserviceable complete all as specified. Note Excavation earth work and PCC paid and measured seperately)

Each

M&L for cross arms, bracings, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, drilling holes for bolts in any shapes or size all as directed & painting of one primer coat and under coat and one finishing coat including taking out unserviceable material complete all as specified and as directed by Engineer-in-Charge.

Qtl

M&L for stay assembly complete with accessories as shown in elect plate no- 1 of SSR for dia of stay rod 20 mm incl GI stay strand of size 7/3.15 mm (maximum length 11.00 mtr) to keep the pole in vertical position incl loop insulator stay all as specified and directed including dismantling and taking out old unsv stay assembly set complete (PCC will be measured and paid separately)

Per Set

Supply and laying armoured HT UG cable XLPE insulated heavy duty electric cable with aluminium stranded conductor, 11000 volts grade (earth grade), cross sectional area 3 core 95 sq mm including taking out old unserviceable AB/UG cable/ OH conductor all as directed.

320

M&L for Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for taking out/for laying under ground cables/pipes etc and getting out any type soil all as directed

104

Cum

All as per item No. 5 here-in before but depth exceeding 1.5 mtr and not exceeding 3 mtr.

Cum

M&L Returning filling in including spreading, levelling, watering and well ramming in layers n-exc 25 cm

Cum

M&L Removing excavated soil to a distance n-exc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point

Cum

Supply and spreading fine river sand in trenches for cushioning of under ground cable/filling cable ducts all as directed by Engr-in-Charge at site Note : - Only punned thickness shall be measured for payment purpose

Cum

Supplying and laying un- reinforced precast concrete cable cover, class HV, Type 1, flat, size 300mmx 180mm x 40mm complete all as specified and directed

1,400

Each