Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.2 LAccepted-AOC FLAT NO 20 AMBEDKAR ROAD DEHU ROAD PUNE 412101 D 101 CESC INDEX NO D 101 HQ CESC PUNE | NA | NA | 412101 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹19.7 L+₹50,724 (2.64%)Rejected-Finance 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹22.4 L+₹3.2 L (16.7%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
5 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
IMPROVEMENT TO P 9 BLDG AT AIR FORCE STATION OJHAR
2022_MES_546202_4
8912/E8
Open Tender
Civil Works
Item Rate
180 days
OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹36,000
Yes
1 Dec 2022
21 Oct 2022
7 Nov 2022
22 Oct 2022
5 Nov 2022
24 Oct 2022
Amount
Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth and getting out in hard/dense soil. complete all as specified and as directed by Engineer-In-Charge.
M&L for cement concrete 1: 4 : 8 type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete. complete all as specified and as directed by Engineer-In-Charge.
M & L for M25 Design Mix for Reinforced cement concrete as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed by Engineer-In-Charge.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batte on rough finished flat surface of concrete . complete all as specified and as directed by Engineer-In-Charge.
M & L for M25 Design Mix for Reinforced cement concrete as in Columns, pillars, piers, posts and struts.complete all as specified and as directed by Engineer-In-Charge.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions on rough finished flat surface of concrete. complete all as specified and as directed by Engineer-In-Charge.
M & L for M25 Design Mix for Reinforced cement concrete as in Beams, cantilevers, bressummers, lintels over 1.5m span. complete all as specified and as directed by Engineer-In-Charge.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-In-Charge.
M & L for M25 Design Mix for Reinforced cement concrete as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like structure. complete all as specified and as directed by Engineer-In-Charge.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs and in similar work not exc 200 mm thick for rough finished flat surface of concrete . complete all as specified and as directed by Engineer-In-Charge.
S&F mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking and binding with mild steel annealed wire not less than 0.9 mm dia or securing with clips. complete all as specified and as directed by Engineer-In-Charge.
All as per item no-11 but 5mm dia and over up to and including 10 mm dia in stirrups , spacers and binders. complete all as specified and as directed by Engineer-In-Charge.
M&L for Modular Fly ash brick work , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. complete all as specified and as directed by Engineer-In-Charge.
M & L for rendering 15mm thick in cement plaster 1:4 on fair surfaces of brick work or concrete surfaces, is to be finished even and smooth without using extra cement in external. complete all as specified and as directed by Engineer-In-Charge.
Allas per item No- 14 but 10 mm thick rendering in cement plaster 1:6 in internal.
Allas per item No- 14 but 5 mm thick rendering in cement plaster 1:3 on ceiling
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering
M&L hardcore of gauge n exc 63mm broken stone or boulder, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.
M & L for cement concrete type D-2 (1:4:8) usng 40 mm graded broken stone aggregate 75 mm thick as sub base complete all as specified and as directed by Engineer-In-Charge.
M & L for coloured vitrified ceramic tiles 10 mm thick dark shade/Double charged/ ultra charged square of size exc 0.42 sqm but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and Including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge.
All as per item No- 20 but in Vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4
M&L for two coats of OBD on new wall surfaces including over a coat of primer above 1mm putty to prepare the surface even and smooth.Complete all as specified and as directed by Engineer-In-Charge.
Preparation of new plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc., and applying two coats of exterior Acrylic emulsion over one coat of primer(Weathercoat)/of berger or Asian sapphire Blue on walls with and including provision of scaffolding required for the treatment to external surfaces of building with required safety measuers etc complete complete all as specified and as directed by Engineer in charge.
M&L for two coats of OBD on new Ceiling surfaces including over a coat of primer above 1mm putty to prepare the surface even and smooth.Complete all as specified and as directed by Engineer-In-Charge.
M&L for texure painting of any type design/texture as approved including preparation of new plastered surfaces or prepared POP surfaces including primer base coat & top coat in patttern/design as approved by Engr in Charge. Make ICI Paint(Dulux)/Berger/Asian(royal)etc complete.(Work shall be executed by Expertise/instructions by manufacturer)
Returning, filling in, including spreading, leveling, and well ramming in layers n. exc. 25 cm thickness in soil. complete all as specified and as directed by Engineer-In-Charge.
Removing excavated material (Soils) to distance of exc. 250 m bu n. exc. 500 m and depositing where directed at a level n. exc. 1.5 m above the starting point. complete all as specified and as directed by Engr-in charge
S & F 2nd class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at jointscompete all as specified as directed by Engineer -in -charge
S/F flush shutters 40 mm thick solid core construction with block boards core and plywood face panels and both faces covered with decorative face veneer /lamination with pattern and design with diffrent type as approved with lipping /frame to match 35 mm thick exterior grade of ISI mark lamination shall be machine pressed with shutters as approved etc complete and as directed.
M & L for 0.9 mm Decorative laminate type 1 of surface finish, colour and pattern of smooth glossy /matt finish with fully glazed finish as approved as in cupboard , pelmemets, doors or to be fixed at any location as directed, fixed with approved adhesive as per manufacturer' s instructions including similar colour edge self adheshive banding tape hot pressed on exposed edge of board as directed. (lamination shall be machine pressed as directed on shutters , CBs , plywood etc as required.)
S & F 100 mm SS butt hinges as approved as per sample compete all as specified as directed by Engineer -in -charge
S & F Heavy duty brass mortise lock 7 lever, vertical type, size 100mm all as approved as per sample compete all as specified as directed by Engineer -in -charge , Make : Godrej/Harrison/Link
M & L for powder coated teak colour any other similar colour as approved with anodized aluminium sliding window with anodized aluminium frame of size 92 mm x 32 mm x1.60 mm thick) of 3 Track with 1.3mm thick, with sliding shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.3 mm thick and locking clip in between two shutters ) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge .(Note: i) powdercoated colour shall be approved by Engr in charge.ii) if aluminium sections of window of above mentioned size not available in market then one size/thickness higher section will be provided by contrctor without any extra cost .)
M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite jamb/cill/platform complete
M&L for 10-15 mm thick POP false ceiling with approved pattern and design on GI chicken wire mesh of aperture 10 mm and dia of wire 1. mm fixed on frame work panel size 600 x 600 mm made of GI channel of standard section as approved of thickness not less than 1.25 mm thick including offsets at diifrent level as per design fixed to required geomatric shape at diffrent level fixed in approved design pattern complete with all necessary arrangement and tying with roof member with suspended of 8 mm dia round bar with required fixing arrangements spacing of suspenders shall not be more than 1.0 mtr on either side of each other all as specified and directed. The rate shall be inclusive of making of coves, moldings’ , offsets, cornices, domes , angular shapes , curves of any shapes, connecting to wall ,projections with including finishing joint with tape & jointing compound ceiling including two coat of plastic emulsion paint over one coat of primer. all fixing shall be done as directed . rate is inclusive of all fittings , fixtures , scaffolding, T&P , safety measures at site .design and pattern as approved by Engr In charge etc completed and as directed
S&F steel work in tubular trusses, purlins, rafter, posts, gusset plates cleats etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st -240 . complete all as specified and as directed by Engineer-In-Charge
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing all the debris and keeping the premises clean all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for
Demolition of RCC of any description and in any position not otherwise specifically provided for
Taking down existing copper/aluminum point wiring (light/ fan/ socket or power points) complete including (fittings such as switches, ceiling roses, pendents, regulators, sockets, etc including wooden battens /casing /capping and conduit etc and making good disturbed surface of walls, ceilings and floors etc. complete all as specified & as directed by Engineer-in-Charge.
Taking down old /unsv DBs , including MCBs etc
M & L for Point wiring with 1.5 Sqmm (nominal area) PVC( FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm medium grade as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. Note:- Cutting & making good of chasis in the wall/Roof/Floor is deemed to be inclued in the quoted rates.
All as per item no 42 but for One 5 Amps socket point on same/below board with other switches.
All as per item no 42 but for One 5amps switch socket point independent.
M & L for Point wiring with 2.5 Sqmm (nominal area) PVC( FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm medium grade as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc Note:- Cutting & making good of chasis in the wall/Roof/Floor is deemed to be inclued in the quoted rates.
Supplying and fixing Modular switch , one way, 16 amps, one Module of Make:- Ancher Roma/Legrand/ Crabetree.
Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module of Make:- Ancher Roma/Legrand/ Crabetree.
Modular switch one way 6 Amp,1 Module , Make Legrand / Anchor Roma/Crabetree .
Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module, Make Legrand / Anchor Roma/Crabetree .
Supply & Fix Modular Fan regulator electronic step type 230 V 2 Module. Make :Legrand/Anchor/Roma.
Supply & Fix Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm two to three terminals. Make : Anchor/Leader.
Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA C series. MCB with separate short circuit indication type Make Legrand Cat. Nos 408595 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge
Supply and fix in repair MCB SPN 6 to 32 Amps 240 volts 10 KA. Make Legrand Cat. Nos 408617 Or equivalent Make :Siemens/L&T, Complete all as specified & as directed by Engineer-In-Charge
Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar ,4 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.
Supply and fix in repair Sheet metal enclosure for DB’s SPN, with 200 amps rated bus bar ,8 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge.
M&L wiring for circuit/ sub main wiring of 2x4.00 Sqmm+1x4.00 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in surface/concealed as required in and including in Steel conduit 20mm dia medium grade complete all as directed by Engr -in- Charge. Note:- Cutting & making good of chasis in the wall/Roof/Floor is deemed to be inclued in the quoted rates.
Disconnect and insulate electric supply wire and taking down carefully ceilling fan 1200mm/exhaust fan 300mm of any make dismantlling blades, and deposited to AGE E/M store yard for reused. complete all as specified & as directed by Engineer-in-Charge
Hanging only old ceilling fan any sweep/ capacity including servicing of fan ,cleaning of all parts greasing oiling of bushes and bearing reassembling and testing for smooth functioning for celling fan/exhaust fan, including replacement of 0.5 sqmm 3 core copper conductor flexible cable connected from celling rose to fan complete all as specified & as directed by Engineer-in-Charge
S&F ceiling fan 1200 mm sweep,230 V, 5 star rating (after assembling the same ) with the fan hook/box including connecting with provision of flexible cord 3 core stranded copper conductor of size 0.50 sqmm from from connector block to fan including connecting to earthing point and fixing regulator all as specified and directed. Make-
Supply & Fixing Exhaust fan 300 mm sweep, minimum 1350 RPM , Metal body and blades , frame and louvers made of iron/ aluminium (As Sample approved ) of matching colour with exhaust fan of suitable size , operated on 230/240V AC Single phase electric supply complete duly grauted bolts in the wall fixed with nuts, bolt and washers including making suitable size hole in the existing wall and making good the plastering by matching colour with existing colour to the disturbed surface of wall complete , including connecting with 3 core stranded copper conductor cable cordas as per manufacture recommendation from ceiling rose to exhaust fan connector including writting MES No. on Exhaust fan white synthetic enamelled paint complete all as per specified and directed by Engr-in- Charge . Make- Havells Cat Pt No Ventil Air DB 300 mm 4 blade or equvalent in , Crompton Transair , Usha Turbo DBB.
Supply & Fix LED down light 6 watt slim compact aluminium die cast edge lit panel, recess mounted square fixture with opal diffuser and separate electronic driver.including all electrical connections. of Make Crompton cat pt LSCRM-6-CDL or equivalent in Havells/ Bajaj complete all as specified and directed by Engineer- in-charge.
Supply and fix in repair decorative ultra slim square profile linear Light Linea lighting fixture extruded polycarbonate, enviromental frendily, energy efficent ready to use pack 20W LED 6000K, complete all as specified and directed by Engineer-in-Charge. MAKE : Crompton, Model No. LDLL20-WW or equivalent in Bajaj/ HAVELLS.
Supply & Fix Decorative wall light fixture in durable plastic body designer mesh in gold finish suitable for 9 watt LED Lamp in white/blue/black mesh type including all electrical connections. of Make Havells Cat Part No LHFOEC1TZ1B014 or equivalent in Phillips/ CG. incl one nos LED lamp 9 watt complete all as specified and directed by Engineer- in-charge.
Supply & Fix Decorative type Mirror light including all electrical connections. of complete all as specified and directed by Engineer- in-charge.
M/s M R MAHANA
SHREE SAMARTH SERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .