Loading
Loading…
Loading…
Tender Value
₹49.3 L
EMD Value
₹98,660
Closing Date
9 Jun 2026, 11:00 pm4d left
Rural Drinking Water and Sanitation Department
Providing FHTCs to 209 Households in Polanayakanpalli habitation of Polanayakanpalli village in Polanayakanpalli GP of Bagepalli Taluk, Chikkaballapura District by Augmentation and Retrofitting Through SVS
303227
RWSSD/2023-24/WS/WORK_INDENT3163/CALL-4
Open
Water supply/sewage lines
RWSSD Division Office Chickballapura
5 documents required · 5 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)
PWD Registration Certificate, Turn over, Bid capacity, Satisfactorily completed, 25percent any work done certificate
₹1,240
₹98,660
2 Jun 2026
2 Jun 2026
11 Jun 2026
8 Jun 2026
Providing FHTCs to 209 Households in Polanayakanpalli habitation of Polanayakanpalli village in Polanayakanpalli GP of Bagepalli Taluk, Chikkaballapura District by Augmentation and Retrofitting Through SVS
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting Cement Concrete Road surfac...
Cutting road surfaces for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the classifications for: Cutting asphalt Road surface by Ma...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specificati...
Earth work excavation for pipeline trenches in all kinds of by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical specifications, i...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Supplying and fixing surface box of required dia. and size with synthetic lid for valves or spindle rods. The surface box should be usable for 50 to 400mm dia. valves, PN 10 / 16 and will consist of l...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
WET MIX MECADAM
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage ...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and Supplying HDPE Pipe Specials
63 MM ELECTRO FUSION COUPLER.
Providing and Supplying HDPE Pipe Specials
75 MM ELECTRO FUSION COUPLER.
Providing and Supplying HDPE Pipe Specials
63 MM ELECTRO FUSION TEE.
Providing and Supplying HDPE Pipe Specials
75 MM ELECTRO FUSION TEE.
Providing and Supplying HDPE Pipe Specials
75X63 MM ELECTRO FUSION REDUCER.
Providing and Supplying HDPE Pipe Specials
63 MM ELECTRO FUSION ELBOW.
Providing and Supplying HDPE Pipe Specials
75 MM ELECTRO FUSION ELBOW.
Providing and Supplying HDPE Pipe Specials
63 MM COMPRESSION MTA.
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confinning to IS.1580 I with WRAS and NSF cenificates with UV stabilized and anti-microbial fusion welded, having thennal sUJb...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confinning to IS.1580 I with WRAS and NSF cenificates with UV stabilized and anti-microbial fusion welded, having thennal sUJb...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads whereve...
Providing and fixing Electro fusion saddle comply with BS EN 12201 - 3:2011, PN - 125 rating and food grade raw material as per BS 6920 for effect on water Quality intended for human consumption. Mate...
Flow Control valve 5LPM/10LPM/15LPM: Providing and fixing Flow control valve using food grade materials SS 316 ball / 1/2" [15mm] including cost of all materials, labour charges, HOM and testing compl...
Providing and fixing brass bib cock of approved quality 20 mm nominal bore
Including All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply of PPR Female Threaded Coupling confirming to IS 15801-2008 and DIN Standards 8077/8092 (20Xl/2mm) All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply of PPR Female Threaded Coupling confirming to IS 15801-2008 and DIN Standards 8077/8092 (20Xl/2mm) All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply of PPR Plain Union confirming to IS 15801-2008 and DIN Standards 8077/8092 (20mm) All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply of PPR Gate valve confirming to IS 15801-2008 and DIN Standards 8077 /8092 (20mm) All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply of PPR Reducing TEE confirming to IS 15801-2008 and DIN Standards 8077 /8092 . Reducing TEE 20mmx16mmx20mm All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply of PPR End Cap confirming to IS 15801-2008 and DIN Standards 8077 /8092. PPR End Cap 20mm,All Lead and lifts and as per the directions of the Engineer in charge of the work.
Supply and Fixing of RCC demarcation stones of 30 cms x 15 cms and 90 cms deep using 1:2:4 cc and 6mm dia rods for verticals and stirrups and rendered smooth , including engraving lett...
Supply and fixing pot rest slab of size 0.45 x 0.30 x 0.20 meters with central dip for resting the pot including two line dressing and edges rounded and with all lead.
Supply and fixing of HDPE water meter box to protect the water meter of class 'B: multijet type of size 15 to 32mm including HDPE box with base dia 300mmxlid dia 200mmxheight 250mm with openable lid a...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade.
Including All Lead and lifts and as per the directions of the Enginee...
Providing and laying water proofing treatment to the Water tanks &Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation of...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including necessary scaffolding and scrapping of old paint and stain with wire brushes and cle...
Providing plastering in CM 1:3 proportion after removing old plaster of existing RCC over head tanks, including smooth finishing, minimum 2% of approved quality water proofing compound, curing, scaffo...
Ladder inside the container: Providing anodized aluminium ladder using 65mm dia x 32mm dia x 3.0mm dia ‘C’ section for ladder side channel x 25mm dia ., flutal pipe for Rungs at 250mm dia ...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embedded in one of the columns in and independent GI conduit of 40mm...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia. with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited ...
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of various dia. with body, bonnet of ductile iron (DI) conforming to IS-1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per ne...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. Includi...
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.Including All Lead and lifts and as per the directions of the Enginee...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments. Including All Lead and lifts and as per the directions of the Engineer ...
Supply and delivery at site of brand new best make non-return as per IS 778/1984 with ISI Mark and as per its latest amendments. Including All Lead and lifts and as per the directions of the Engineer ...
Supply and delivery at site wrought middle steel (galvanized) GI Union confirming to IS 1239-II, 1991 with latest amendments if any. Including All Lead and lifts and as per the directions of the Engin...
RCC hume pipe Circular pump house: Supplying precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...
Fabricating, Supplying and mounting MS Box Made out ... SWG Suitable for Floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equip...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S.flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x75x...
Supplying 6A flush/projected type socket and a 6 amps flush/projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounte...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100Vgrade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-...
Supplying & fixing of porcelain fuse channel with cut out on existing wooden panel using necessary nuts, bolts and washers etc" B) 32 Amps
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF,energy cross-3with Short circuit breaking capa...
Supplyng and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240 4 /450 V upto 300 mA sensitivity on Existing wood / panel board 32-40 Ampspole.
Supplying and Fixing a shut capacitor of … KVAR capacity with necessary clamps, bolts, and nuts on existing wooden metal board including banking of more than one capacitor upto 5 KVAR.
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C. Group A
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90 thick GI pipe 2.5Mtr long buried in a pit ... The pit should...
Supplying of 1.1 KV LT UG cable having alluminium conductor PVC insulated, sheathed, extruded inner sheathed, galvanized, steel strips (except 2C x 10Sq.mm wire armoured) as per IS-3975 : 1990 & extru...
Labour charges for laying of 1.1K V class UG cable in existing in existing trench GI pipe/stoneware pipe /on wall /on pole as required, In exIsting trench/duct. 6 Sqmm to 16 sqmm
On wall/structure a)6 sqmm to 16sqmm
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc, complete (As per civil SR KSRB 1-2, P7) In soil (Hard)
Supplying and fixing of class -A (medium) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class (a) 40mm.
Supplying and fixing L.T cast iron pot heads suitable for 1.1K V class UG cable filled with necessary bitumen / insulation compound with terminals,clamps bolts nuts and washers etc, 10 sqmm.
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps,nails, guttas/spacers etc.,GI Wire c) 8 SWG
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kSC-ST -3163.docx
Tender Document • 0.22 MB
Download all tender documents and submit your bid