NIT-57 of 19-20 ADDN / ALTN OF ELECTRICAL FITTINGS, FIXTURES CONNECTED WORKS AND SECURITY LIGHTS AT KISHTWAR, JANGALWAR, BHANDARKUT AND DUL UNDER GE (I) 873 EWS.

Amount

Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing and capping and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

Supply only in replacement LED Lamp 230 volt 10 watts, base cap B-22, complete all as specified and as directed. Make : Havells / Crompton Greaves / Philips / Wipro

Tube light fitting box type suitable for and including LED 20 tube Rod 4' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Havells 'E-Lite LED Curve' Cat Part No LHEXBXPNIN1W020 or equivalent in Philips / Wipro / Crompton / Syska

LED recess luminaire, with high brightness SMD LEDs as light source, suitable for Armstrong / Grid ceiling, 2' x 2' size, 34 / 36 Watts including making connection from ceiling rose to fitting with PVC insulated sheathed flexible copper conductor cable of size 0.75 Sqmm complete all as specified and as directed. Make : Havells Cat Part No PLUTONEO2X2PLR34WLED857S or equivalent in Syska / Wipro / Philips / Crompton

Street Light fitting 60 Watts LED made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV built-in surge protection device including taking down old unserviceable Street Light Fitting any type complete, all as specified and as directed. Make : Havells 'Endura Pearl Plus' Cat Part No SL60WLED757SASYTOPC or equivalent in Wipro / Philips / Crompton / Syska

Pole mounting bracket made out of medium grade GI pipe of 32mm dia, bent to 600 required shape of length 1.5 mtr with two No's of flat iron clamps made out of 32 x 6mm with 12mm dia bolts, nuts & washers duly painted with aluminium paint over a coat of primer including taking down old unserviceable brackets all as specified and as directed.

Wiring for connecting Street Light fitting to DB complete with two single core PVC insulated multistranded un-sheathed FR PVC cable of size 1.5 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FR PVC cable earth wire of 1.5 Sqmm dia, complete all as specified and directed. Note : Two run of 1.5 Sqmm wire, one run of 1.5 sqmm wire and one run of PVC conduit shall be considered as one unit length.

DB for Street Light Fitting made out of CRCA sheet, dust and vermin proof, outdoor type, duly painted, of size 200mm x 200mm x 150mm with arrangemnt for incoming and outgoing feeder with bus bar of suitable capacity for termination of line with single MCB SP 0-5 Amps, 10 KA (in accordance with IS / IEC 60898-1) and arrangement for fixing copper wire of size 2 x 2.5 Sqmm with 1 x 1.5 Sqmm earth wire in green colour of FR PVC insulated copper conductor from DB to light fitting complete all as specified and as directed

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and exceeding 1.5metre depth but not exceeding 3.0metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Steel Tubular swaged poles type 410 SP-31 (9.0 mtr long) conforming to IS : 2713 Part-I to III 1980, complete with 6 mm thick mild steel base plate, finial taper plug, MS bolts, nuts, screws including painting upto 1.5metre above PCC coping in black and white strips 05 Nos of 30cms each starting from the bottom of the pole and two coats epoxy based paint aluminium grade finish to the remaining external surface over one coat of primer complete all as specified and as directed.

Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in coping of poles, complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 11000 volts grade ISI marked cross sectional area 16 Sqmm 4 core, complete all as specified and as directed.

Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.

Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm, all as specified and as directed.

Steel pipe galvanised light grade, 25 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

M/S NARAYAN CONSTRUCTION

darshan kumar gandhi

SWASTIK TRADERS

M/S BALI CONSTRUCTIONS

VARDHMAN INTERNATIONAL

BHAT ENGINEERS

Girdhari lal parihar

Bidder Name

M/S BALI CONSTRUCTIONS

SWASTIK TRADERS

VARDHMAN INTERNATIONAL

Girdhari lal parihar

M/S SUMEET TRADING CORP

darshan kumar gandhi

M/S NARAYAN CONSTRUCTION

BHAT ENGINEERS