Construction of 33 KV Line

Amount

PART-A Materials Particulars (Provided by contractor)

33 KV Cross Arm

33 KV Polymer Pin Insulator

33 KV Polymer Disc Insulator B&S Type

33 KV Polymer Disc Fitting for Dog Conductor

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300mm² Indoor

33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through

Number Plate

Danger Board with Clamp

Barbed wire

Al. Binding wire

Bolts, Nuts, & Washers

MS Earthing Rod 20x2500 mm

Earth wire clamp

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

Top channel clamp for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make as per site requirement

X-arm clamp for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make as per site requirement.

Stay Clamp for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make as per site requirement.

Stay Rod 20x1800 mm with Stay insulator must be necessary

Stay wire 7/8 SWG

M.S. Angle Iron 65x65x6mm bracing

33 KV M.S. bracing Angle clamp (Top side) for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make as per site requirement

33 KV M.S. bracing Angle clamp (Bottom side) for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make as per site requirement

PG clamp for Dog conductor

33 KV E bracket with clamp

33 KV F bracket with clamp

Aluminium Paint

Red Oxide Paint

GI Wire 5 mm

Extra cable support angle

Clamp for extra angle support

Stud clamp for ST Pole

33 KV Guarding Angle

33 KV Guarding Angle clamp for ST/PCC Pole with nut bolt by 50x8 mm MS flat Iron make as per site requirement

All fittings related to 33 Bay & Structure as Panther to Dog conductor PG clamp & etc.

PART-B WORK Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

PCC Pole 9 M Long

ST Pole 11 M Long

3x300 Sq mm XLPE Cable 33 KV

ACSR Dog Conductor

Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).

Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).

Erection of Four pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).

Erection of Double pole structure on 9 mtr PCC Pole for one side O/H and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire & earthing, etc. complete) .

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Tri pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Fabrication of 13 mtr. Long S.T. pole by welding 3 mtr. long 5” dia M.S. pipe and flat iron 50 x 6 mm 12” long by providing M.S. pipe. (as per site requirement)

Erection of Single pole structure on 13 mtr ST. Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 13 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 13 mtr ST Pole for one side O/H and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Single pole as stud pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, Aluminium paint, red oxide paint etc. complete).

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1.0 M depth x1.0 M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand. as per site requirement HDD mathod can be used.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Indoor/Outdoor.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Straight Through.

Providing of 6” dia MS Pipe, inserting 33 KV cable through pipe and jumpering complete work.

Special Pipe earthing for 33 KV Cable ang C/J kit safety (Complete material with work provided by contractor).

There will be possible of breaking of various type of water supply pipe while laying of U/G cable, for which the repair will be charged. (Include complete materials and work)

Road restoration charges provided by contractor

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Tree Cutting Compensation

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT/ 11 KV Line, Dence area, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc.

M/s Anil kumar singh

M/S SHUKLA ENTERPRISES

ARK ENGINEERING

R A ENGINEERS