Loading…
Loading…
Tender Value
₹100.0 L
EMD Value
₹2 L
Closing Date
3 Jun 2026, 3:00 pmClosed
AKHILESH KUMAR MANDAL
Executive Engineer
Local Area Engineering Organistion, Work Division-2 Benipur
DILIP KUMAR
Superintending Engineer
Development work on the sports ground at Dr. Nagendra Jha Stadium, situated within the campus of Lalit Narayan Mithila University, Darbhanga (Darbhanga District), as recommended by the Honorable Shri Sarvesh Kumar, Member of the Legislative Council (MLC).
132368
GR-01/NIT-04/2026-27/LAEO/W.D-01 DARBHANGA
Open Tender
CIVIL
Darbhanga
• Name and Address of Agency with registration No.
• Earnest Money
• PAN NO.
• GST Registration
• Character Certificate
• Affidavit
• Affidavit/self declaration of investment of 25% of bid value
• Existing commitments
• Experience As Per Nit
• If any other document as per NIT
CIVIL
PERCENTAGE
L1
1
10 documents required · 10 mandatory
₹10,000
Processing Fee: 3540
₹2 L
27 May 2026
27 May 2026
5 Jun 2026
27 May 2026
3 Jun 2026
27 May 2026
Labour for installation of uPVC extruded casement/
Earth work in excavation in foundation trenches or drains(not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete.
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l,
Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1.4.8 (1 Cement :4 coarse sand :8 graded stone agregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work puto plinth level1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)
Brick work with bricks of class designation 100A in foundations and plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand )
Half brick masonry with bricks of class designation 100A in foundations and plinth in :Cement mortar 1:4 (1 cement: 4 coarse send)
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level
Providing and fixing 40 mm Steel pipe in Ramp Railing
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4(1cement:2:2 coarse sand :4 graded stone aggregate 20mm nominal size)
6 mm cement plaster to ceiling of mix :1:4(1 cement: 4 coarse sand)
Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete.
12 mm cement plaster of mix: Cement plaster in course sand 1:3 (1 cement:3 coarse sand) Extra for providing and mixing water proofing material in proportion recommended by the manufacturers:
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete75 mm
Providing and fixing 1 mm thick M.S.sheet sliding - shutters with frame and diagonal braces of 40x40x6 mm angle iron,3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mm angle and T-iron guide at the top bottem respectively including applying a priming coat of approved steel primer.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. fIxed to steel windows by welding
20 mm cement plaster of mix ;1: 4(1 cement: 4 coarse sand) With neat cement punning
12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand)
12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) With neat cement punning
6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand)
Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand )20 to 25 mm thick -
Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)
Providing a wood bit hanging on the lintel level for show the chart paper.
White washing with lime to give an ever shade . New work (three or more coats)
Applying one coat of cement primer of approved brand and manufacture on wall surface: Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade. New work (three or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary pain+ of approved brand and manufacture
Centring and shuttering including strutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers.
Centring and shuttering including strutting,propping etc. and removal Of form for. Columns,Pillars, Piers, Abutments, Posts and Struts
Centring and shuttering including strutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform.
Centring and shuttering including strutting,propping etc. and removal of form for. Stairs,(excluding landings) except spiral-staircaces.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S./PVC box etc as reouired.
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
Supplying and fixing metal/pvc box of 180mm X 100mm X 60 mm deep (nominal size) on sudace or in recess ivith suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps p
Supplying and fixing batten / angle holder including connection etc as required.
Supplying and fixing following way,single pole & neutral, sheet steel, MCB distribution board,240 volts, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted, including earthing etc as required. (But without MCB/RCCB/Isolator)
Supplying and fixing following rating,240/415 volts "C" curve, miniature circuit breaker suitable for loads of single pole in the existing MCB DB complete with connection, and commissioning etc. as required.
Providing and fixing following capacity double pole/ four pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required.
Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required..
Regular/standard make 1400 mm sweep ceiling fan, mimimum air delivery 245 m3/min and service value equal or more than 4.10 as Per BEE.
20mm Nominal
10mm Nominal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
DARBHANGA NIT-04.pdf
NIT • 0.33 MB
DARBHANGA NIT-04.pdf
NIT • 0.33 MB
DARBHANGA NIT-04 PAPER CUTTING.pdf
NIT • 2.86 MB
BOQ NIT-04 GR-01.pdf
NIT • 3.38 MB
CORRIGENDUM FOR DARBHANGA NIT-04 .pdf
NIT • 2.47 MB
BOQ Re NIT-01 GR-01.xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .