REPAIR/MAINT TO INTERNAL ROADS AND APPROACH ROADS IN OTM AND MD ACCN INCLUDING CAT EYE, ROAD MARKING, PATHS, BERM, PAINTING AND OTHER ROAD FURNITURE OF AGE B/R-I UNDER GE (EAST) LUCKNOW

Amount

M&L for repair to pot holes of any depth n.exc 1 sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by filling in screened & graded road metal, watering and well rammed (including supply of road metals) complete all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. using mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-30 @ 5.00 kg per 10 sq metre complete all as specified and directed.

M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as directed and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed.

Dismantling existing damaged/disturbed brick edging complete all as specified and directed.

M&L continuous brick edging with fly ash bricks with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed

M&L for providing and laying 2.50 mm thick hot applied thermo plastic road marking materials in uniform thickness with glass beads as per clause No 803 of MORTH specification including cleaning of roads surface, heating the material within specified temperature limits for marking with all necessary arrangements required complete all as specified and directed.

M&L preparation of new or previously untreated stone/ concrete surfaces of any description not otherwise described over 10 cm in width ot girth and applying two coat of antifungal paint 100% acrylic emulsion paint (weather coat) over a coat of Birla/JK wall putty complete all as specified and directed.

S&F in repair delinator made out of medium grade mild steel rectangular pipe of size 100mmx50mm, black powder coated, duly laminated with 300 mm wide reflective strips all around made up of high intensity grade retro reflective substrate, 600 mm overall length embeded in PCC 1:2:4 type B-1 using 20 mm graded stone agregate bed block of size 300mm x 300mm x 200mm in ground including excavation & earthwork complete all as specified and directed.

S&F "Cat Eyes " of size width not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed. Make : 3M/Stimsonite

S & F speed bumps made of heavy duty tough rubber of size 350 mm x 250 mm x 53 mm and weight 1.2 kg approx, colour black and yellow, as per manufacture instruction complete all as specified and directed Make: Dark Eye/Avery/Dennison.

M/s Ram Singh Agarwal

Shakti Tar Products