Civil Works for Refurbishment of Fuel Factory Rigs Area inside HAL Factory Lucknow.

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd. / Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC (Service Accounting code) for the subject work is SAC 995419

Income Tax Returns for the last three years

Annual turnover for the last five years.

Plant & Machinery details for the work.

Proposed work completion schedule in the form of bar-chart and monthwise billing plans.

Value of work on hand as on date of submission of tender duly certified by CA also indicating the stipulated period of completion (required for bid capacity also)

Bank Balance Statement for the last thee months.

Overdraft facilities available with the agencies.

Balance sheet for the last five years.

List of supervisor/ technical staff/

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.535440.00

Latest Solvency certificate is required for Rs.107.09 Lakhs from scheduled/Nationalized Bank not more than one year old from last date of online submission of tender. The solvency certificate shall be issued in general stating “ To whomsoever” or specific to HAL-AD Lucknow.

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of Items

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all kinds of soil, complete for foundations, column footing, wall foundation, manholes, post holes, trenches etc. including spreading, levelling, watering and well ramming in layers not exc. 25 cm. dewatering if required, dressing the sides, dispoal of excess surplus soil, including cost of all labours, materials, compaction equipments, machineries, transportation, T&P etc.as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing & laying PCC: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, column, footing, trench, appron,floor,under ground tank, post hole, platform under floors or any other similar description of works eg. drains, pipe lines bedding layers, road, chambers excluding the cost of centring and shuttering, including form work, compaction, curing, materials, labour, mechanical mixing, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and laying bricks (non modular) of class designation 7.5 (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand), in superstructure above plinth level up to floor V level in all shapes and sizes, walls, ducts, or any description of similar work, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth, cost of scaffolding, raking out joints up to 1 cm depth as the work proceeds, cost of material, labour, T&P, curing, wastage, transportation, loading, unloading, etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) etc or any other similar description of works, including form work, side shuttering, compaction, curing, materials, labour, mechanical mixing, including making of expansion/contraction joints, construction joints wherever required as per IS Code & required at site, making of grooves, wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and laying deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON as approved by EIC of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, welding, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, loading & unloading, welding,T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement, including cost of all labour, material, scaffolding, curing, hacking of concrete surfaces, wastages, making joints/grooves (if required), T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Removing white or colour wash, existing paint of any description by scrapping and sand papering manually/ or through grinder, scrubber etc. and preparing the surface smooth including necessary repairs to scratches etc. complete cleaning the surface including disposal of rubbish to the designated place including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing and applying white cement based putty of make J&K/ Birla/ Asian / Berger or as approved by EIC, of average thickness 01 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing & applying two coats or more of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian Tractor Uno /Berger /ICI/NEROLAC/Dulux/Birla Opus etc. as approved by EIC, to walls of any description at any height / depth of required shade and colour all complete to achieve even shade and colour (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre including preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian/Berger/ICI/NEROLAC/Dulux/Birla Opos etc of approved tint at any height / depth of required shade and colour all complete to achieve even shade and colourand including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, spreading and removing coverings to doors, windows, floors, fittings to protect from splashes, removing and replacing furniture's, moveable cupboards, chicks, blinds, washing floors, cleaning glass, joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins, cost of all labours, materials, loading, unloading, scaffolding, wastages, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in required colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete (thickness with 15 mm or as specified by the manufacturer ) of approved make of approved brand & manufacturer like Kajaria/ johnson /Somany /Nitco as pproved by EIC in required colours, shades pattern and print / design on riser and tread of staircase with cement paste or adhesive of any size 800x800mm / 300x1500mm / 300x1200mm or as per site, as required and directed by Engineer-in-Charge in skirting, risers/ treads of steps and dados, tile thickness or as per manufacturer including pointing in white cement/grout mixed with pigment of matching shade complete including cutting of tiles , joints champhered in turning point and pointing the jioints with white cement and matching colour pigment etc including cost of all, materials , labours, scaffoldings , T & P , wastages , circular cutting / general as per per requirement etc complete at all height as per specification of EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in required colours and shade, of approved make of approved brand & manufacturer like Kajaria/ johnson /Somany /Nitco as pproved by EIC in all colours, shades pattern and print / design laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including pointing in white cement mixed with pigment of matching shade complete including cutting of tiles , joints champhered in turning point and pointing the jioints with white cement and matching colour pigment etc including cost of all, materials , labours, scaffoldings , T & P , wastages , circular cutting / general as per per requirement etc complete at all height as per specification of EIC.-Double charge vitrified tile polished finish of size -Size of Tile 600 x 1200 mm, or larger or as required at site. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying matt / polished finished vitrified tile (heavy duty) of size 600 x 1200 x16mm ./ 600 x 600 mm x16mm or as required at site (size of tile will be as per suitability of site condition) (thickness to be specified by the manufacturer) having water absorption less than 0.5% , flexural strength more than 38 N/Sqmm and conforming to IS: 15622 of approved make like Kajaria/ Johnson/ Somany/ Orient bell/ Nitco etc. as approved by EIC, in required colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. including cost of all material, labour, cutting wastages, T&P etc. including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, cutting into shape, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying PVC Flooring 02mm thick heavy duty, industrial use & flexible non directional, multi colour polymer chips PUR surface protection, homogeneous PVC flooring rolls in width of 2m and continous length of 20m or as per manufacturer's specification, laid in floors/ skirtings in approved design and shade of approved make such as Adventus series of Wonder Floor/ Armstrong/ Responsive SPICS RQ brand or as approved by EIC conforming to IS standards in roll form fixed with suitable adhesive and joints thermo-welded to form seam less surface including cted Place, including removing of existing PVC Flooring and deposited the same as directed lace, cleaning of surface and preparation of surface to recieve the floor, filling of minor pits/ holes if any width birla putty/ cement mortar etc including cost of all material, labour, cutting wastages, T&P etc. complete all as required and directed by EIC. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing tiled false ceiling of approved make Armstrong/ Knauff or as approved by EIC of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24 x 24 x 0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T sections shall be pre-painted with polyester paint, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by EIC, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge, including cost of all material, labour, cutting, wastages, transportation, cartages, loading, unloading, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing Powder Coated Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required, thickness of aluminium section shall be 1.5 - 2.00 mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (All fittings like -Glazing, paneling and dash fasteners to be paid for separately) including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. -Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing powder coated Aluminium work for shutters of doors, windows & ventilators including hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required thickness of aluminium section shall be 1.5 - 2.00mm including cleat angle, Aluminium snap beading for glazing / paneling C.P. brass / SS stainless steel screws, including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.-Powder coated aluminium (minimum thickness of powder coating 50 micron) (Note: Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing in Aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in-charge (Cost of Aluminium snap beading shall be paid in basic item) with float glass panes of 5.0 mm avg thickness of make Saint Gobain/Modigaurd or as approved by EIC.(weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws as per architectural drawings and including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, cost of all labour, material, T&P, wastage, transporatation, loading, unloading, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge.

Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides in panelling, flat pressed three layer or graded wood particle board of approved brand such as CenturyPly/ Action TESA/ Green panel/ Novopan etc. conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, including cutting to size, squaring, finishing, cleaning etc. including cost of all materials, labours, T & P, cutting wastages, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (sample is to be approved before procurement of work)

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment)., including cost of all labour, material, welding, T&P, wastage, transporatation, loading, unloading, cartages, etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing, and as directed by Engineer-in-charge. (Note- only weight of grill to be measured for Payment)

Providing and fixing aluminium tower bolts, ISI marked, powder coated (minimum thickness of powder coating 50 micron) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200 mm x 10mm, including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge

Providing and fixing Aluminium sliding door bolts 300 x 16 mm, ISI marked powder coated (minimum thickness of powder coating 50 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with nuts and screws, including cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium powder coated handles 125 mm, ISI marked powder coated (powder coating (thickness min 60 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour or shade, with necessary screws, including, cost of labour, materials, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, powder coated (powder coating (minimum thickness of powder coating 50 micron) not less than grade AC 10 as per IS code) transparent or dyed to required colour and shade, with necessary screws, including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing IS : 12817 marked 125x64x1.90 mm stainless steel butt hinges with stainless steel screws etc. complete including cost of labour, materials, T&Petc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. all complete, including cost of all labour, material, T&P, wastage, transporatation, loading, unloading etc. as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Supplying and fixing of wall panelling with 04mm thick Aluminium composite panelling (ACP) sheet of skin thickness 0.5mm both side, FR grade, exterior /interior grade, both side same colour or as per site requirement as approved, make Eurobond/ Alstone/ Alkor as approved, over a framework of aluminium extruded sections as required at site, finest quality two layers of Aluminium skins. Pre coated and thermally bonded with non-toxic polyethylene core, fire resistant interior grade, dust and corrosion resistant, skin thickness 0.5mm with tolerence in width & length as +/- 02mm and in thickness as +/- 0.2mm or as per manufacturer fixing of ACP with SS screws, sealing of joints with silicon adhesive of approved make, levelling of surface of wall /column/beam etc as per site, (Base work of aluminium will be paid separately.) including all cutting as per site requirement, fixing with all other material, T & P, labour, cutting, wastage, cartage, transportation, loading, unloading etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick of make Century/Swastik/Action TESA/ Kitply, or as approved by EIC, including stainless steel butt hinges (125mm, 04 nos.) with necessary screws, cost of materials, labour, wastages, transportation, T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing, Fabricating & fixing of Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,welding, cut to shape, bending, fixing in position and applying a priming coat of approved steel primer all complete, MS Roof Truss (framed), purlins, crain, gantries, rails & fasteners and heavy bracket framing beam, Tee, angle, channel, tubular, rectangular, square, flat, (all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc), including cost of all labour, material, T&P, erection, wastages, transportation, loading, unloading, cartages, etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and fixing Vertical venetian blinds of 75/ 100mm width of approved colour & texture/pattern (approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux, MAC or as approved by EIC, all complete with material, fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage, including cost of all materials, labours, T & P, cutting wastages, making provisions for hardware fittings, pattern, design, colour etc. as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Note-sample shall to be approved before procurement)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., thickness 1.5 - 2.0mm as directed including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Supplying and fixing not less than 50 micron thick designer film on glass door/ window/ galzed partition of Garware or equivalent make and shade as approved , reflective type, including cleaning of glass with liquid soap before fixing of film including removal of damaged/ unserviceable sun film from glass, cleaning of glass, wherever required etc. complete including cost of all labour, materials, wastage, T&P, etc. all complete work at all heights etc as per specification, drawing and as directed by Engineer in charge (Note-sample shall to be approved before procurement)

Providing and fixing on wall face unplasticised rigid PVC rain water pipes single socketed pipes(110mm dia) of make Supreme/Astral/Finolex or as approved by EIC, conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes- 110mm bend conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge including disposal of unserviceable material within 50 metres lead including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications of approved make & shade such as Asian /Berger /ICI /NEROLAC /Dulux /Birla Opus etc. as approved by EIC, including appropriate priming coat, preparation of surface, including cost of all material, labour, cutting wastages, T&P etc. including cost of all labours, materials, scaffolding, transportation, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. On steel work -

Providing and laying factory made chamfered edge Cement Concrete paver blocks, 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern in footpath, approach, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing and laying Chequerred precast cement concrete tiles 22 mm thick Dark shade pigment using ordinary cement in footpath,courtyard, approach & or as required on site, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement and matching pigments of matching shade , including cost of all labours, materials, scaffolding and T&P etc, as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge. . (Note- Prior Sample shall be approved by the EIC).

Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators withextruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately) including cost of all labours, materials, transportation, loading, unloading, wastages, cartages, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement, including cost of all labours, materials, equipments, machine, cutting, T&P, welding, erection, etc, as required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer-in-charge.

Providing & applying two or more coats with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of first quality of approved shade and make of BERGER(Weathercoat Long Life 10)/ ASIAN (Apex Ultima)/ NEROLAC (Excel everlast 12/Total)/ DULUX (Wearther shield max)/ protect)/ BIRLA OPUS (One true look/Life):etc including one coat of primer , preparation of surfaces, by brooming down, removal of flakes , oil ,grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing rubbish outside in dustbins removal of all splashes and cleaning glass and joinery,including cost of all labours, materials, rubbing, sand papering, finishing the corners, matching with the existing surface, scaffolding, transportation, loading, unloading, T&P etc., as required for proper completion of the work, all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge. (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Note- Sample shall be approved by EIC before procurement of material)

Providing and fixing of frameless Automatic Bi-Parting sliding door operator for clean opening size of 1800mm x 2100mm / 1800 X 2400 mm / 2000 X 2400mm or as per site requirement,12mm thick toughened glass modular design, including internal cover, sensors, and programme switch complete, with operator. The track profile should be separate from the main for enabling reduction in vibration. Microprocessor controlled control unit. It should be Self-learning, with adjustable parameterrs for opening and closing speed, hold-open time and opening and closing froce etc as per direction od EIC. Make Dorma, Taiton etc or as approved by EIC. The side of door shall also be filled with similar material comprising with aluminium sections, toughned glass etc all complete as directed by EIC. (payment will be made as per actual door size fixed at site)

Providing and fixing of Acoustic single leaf door of 75 to 100mm thick height of door - 2.10m to 2.40m achieving sound reduction of upto 45 to 50 STC. Double rebated, hollow GI metal acoustic door, sheet thickness-frame 1.6mm & shutter- 1.2mm, infill-rockwool 96kg/cum densityslab, finish-powder coated, SS ball bearing hinges/ heavy duty SS hinges of size as per door size min 04 nos., door closer with STD arm of heavy duty, 5mm thick toughened double glazed, dead lock & key of make Godrej, SS 'D' type pull type or as directed by EIC handles on both sides -300mm long, automatic door bottom seal, smoke & air tight seal. Three side frame and drop seal below will be provided along with the door with high load bearing hinges.The wall can also be finished making good, finished with POP after the installation, all complete as per manufacturer's specification and direction of Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), (thickness with 15 mm or as specified by the manufacturer ) of approved make of approved brand & manufacturer like Kajaria/ Johnson /Somany / Nitco as approved by EIC in required colours, shades pattern and print / design, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.including cost of all material, labour, cutting wastages, T&P etc. complete all as required and directed by EIC.(Note- Sample shall be approved by EIC before procurement of material)

Providing and laying 03 mm thick self levelling Epoxy resin flooring system of Xchem Polymer/ Enipoxy / RBS TECH or as approved by EIC as per the following method for ganways paintings, line paintings, shop floor paintings etc as required: 1.Surface Preperation: (a)The entire surface to be treated should be clean and devoid of any foreign material which may effect the bonding of the Epoxy flooring. A heavy duty Floor grinder to be used to remove all/any existing paint epoxy to expose the original slab/floor (b) After the Grinding the entire surface should be made devoid of any dust ,preferably with a vacuum cleaner/Blower including floor Repairs with Epoxy Mortar, wherever requried as per site requirement. (C) For the joints at surface providing and filling of PU sealent at crack. 2. Epoxy Primer Application: On the well prepared surface apply Epoxy Primer @ 100gms depending on the sustrate and porosity. Allow it to dry. 3. Providing and Laying 2 mm Epoxy Self Levelling Screed: Mix the entire contents of Epoxy SL with a Slow Speed Drill (350- 400RPM) with paddle arrangement. On the well treated primed surface apply Self levelling Epoxy Screed to a thickness of 1mm with a Notch trowel and spread evenly on the entire surface. Once laid, use a spike roller and Roll the surface with a back and forth motion. This activity will help remove any entrapped air from the system. Avoid excessive rolling as once material starts gelling , it may leave Spike Marks on the surface. Once done allow it to dry for min 24-48 Hours subject to ambient conditions.

Designing, providing and fixing multiwall three or more layered polycarbonate sheet panel co-extruded Ultra Violet (UV) protective coating on extemal surface with standing seam on both the running ends, sheet shall be connected using polycarbonate connectors having grip lock double tooth locking mechanism and provided with endcap at the ends to ensure water and air tightness. The light transmission from transparent or translucent or opaque or in combination polycarbonate sheet, varies lrom I 5 to 85%, shall be decided by engineer in charge as per requiremcnt 'thc polycarbonate sheel shall hav dart drop impact value more than 60 Joules as per lSl4434:2023 and confirm either flame retardancy of class UL-9411B/94V-0 category as per IS14434:2023 or category V0 & HB as per ASTM D635-18 or BS1D0 classification as per EN13501 for fire safety. The yellowness index tested as per ASTME 313(D1925) or ASTM D1925 shall be equal to or more than 10 unit or 06units respectively on a sample after 5000 hrs of exposure of UV/ sunlight. The cross section ends of-poly carbonate sheet shall be provided with self '-adhesive aluminium impermeable taps at top and aluminium ventilated tape at bottom of' the sheet and covered with polycarbonate / aluminium U-shaped protective profile. The poly carbonate sheet shall be held in posttton by using stainless steel (SS304 grade trapezoidal cleat of 01 mm thick having minimum bottom width 35mm and top width 50mm or any other shape and size as per design requirement and manufacturer specification, cleat fixed with 2 or more stainless steel screws of 5 mm diameter with 25mm long with structural steel framework. The cleat shall be tested to withstand pull oul force equal to wind speed of 50mis as per IS, 875 and design test report shall be subnritted to [Engineer-in-chargc for approval before use. The cost ot' ridge and guttcrs of pre-coated galvanized iron sheet of approved specilications and structural steel framework of shall be paid in respective item for separately- 12 mm thick. 1000 (+10%) wide panel with U value not more than 2.50 W/m2 K and weight not less than 2.25kg/sqm. (Note- Sample shall be approved by EIC before procurement of material).

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) Of area 3 sq. metres and below including stacking within 50 metres lead and depositing to Civil Factory store including the cost of all approved materials, labour, wastages, testing, T&P at all heights etc. all complete as per specification and as directed by Engineer In Charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : of area beyond 3 sq. metres including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Taking out existing wooden / Aluminium door shutter, repair by cutting, resizing, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of old hinges with SS screw by SS hinges and screws etc. as required, including cost of all labours, materials, cutting, wastages, T&P etc. required for proper completion of the work, all complete at any height, as per specification, drawing and as directed by Engineer in charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead including disposal of unserviceable material, cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD or as directed by Engineer-in-charge.

Dismantling old plaster/tile or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Dismantling tile including cement mortor in floors, PVC Flooring, wall and roofs laid in cement mortar including stacking material within 50 metres lead- For thickness of tiles above 25 mm and up to 40 mm including disposal of rubbish to the dumping ground within 50 metres lead, including cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling of any description including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification of CPWD and as directed by Engineer in charge.

Dismantling/ Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) stacking serviceable and unserviceable material separately including cutting reinforcement bars including cleaning, cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Removal of Debris up to a lead of 5.00 KM including Loading , Unloading, transportation, disposal at directed place including cleaning, cost of all labours, materials, transportation, scaffolding, T&P etc., all complete at any height/depth, as per specification, drawing and as directed by Engineer-in-charge.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). Make Asian /Berger/ Pidilite or as approved by EIC. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete including cost of all labours, materials, scaffolding, curing, wastages and T&P etc. as required for proper completion of the work, all complete at any height/depth, all as per specifications, drawings and as directed by Engineer-in-Charge. (Note- Sample shall be approved by EIC before procurement of material)

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg/10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.( rate of 1.435 kg per sqm= 447.35/10=44.74 per sqm) including cost of all labours, materials, scaffolding, curing, wastages and T&P etc. as required for proper completion of the work, all complete at any height/depth, all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings like MS handle, MS hinges (heavy duty), locking arrangement, bushes for fixing of door, complete, including applying a priming coat of approved steel primer, using M.S. angels 40x40x6 mm for diagonal braces, cost of all labour, material, welding, cutting, cartages, loading, unloading, T&P, wastage, transportation etc., as required for proper completion of the work, all complete at any height/depth, as per specification of CPWD, drawing and as directed by Engineer-in-charge.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts including cost of all labours, materials, scaffolding, curing, wastages and T&P etc. as required for proper completion of the work, all complete at any height/depth, all as per specifications, drawings and as directed by Engineer-in-Charge (EIC) -75mm average thickness.

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete including cost of all labours, materials, scaffolding, curing, wastages and T&P etc. as required for proper completion of the work, all complete at any height/depth, all as per specifications, drawings and as directed by Engineer-in-Charge (EIC)- Bars upto 12 mm diameter

Supplying and fixing of Wall paper of thickness 250-300 GSM approx. (or as per manufacture specification) of make Excel, Aerolux, D'Decor etc. as approved by EIC, the shade and texture as required and approved including preparation of surface to paste/ recieve the wall paper, fixing of wallpaper with adhesive in required pattern on wall all complete at any height/depth, all as per specifications, drawings and as directed by Engineer-in-Charge (EIC). (Note- Sample shall be approved by EIC before procurement of material)