Special repairs to Bldg No. T-277, T-147, T-103 (Cook house) and T-9A (Washerman shop) at old Mil Stn Kapurthala under GE Kapurthala.

Amount

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc. 1.50 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but not exc 4 sqm each for doors and windows complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 sqm complete all as specified and directed.

Material & labour for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels over 1.5 m clear span, benching, coping, bed blocks and roof kerbs etc including use of necessary form work complete all as specified and directed.

M&L for framed work as in door or gates of angle or other section with gusset plate rails braces etc, complete drills for fixing of steel sheeting or other covering door etc conferming Fe-290 (Gde E-165) complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & as per manufacturer's instruction complete all as specified and directed.

Supply & fix factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement,fixing in the frame at the site as per specification & as per manufacturer's instruction. complete all as per specified and as directed by the Engineer in Charge.

S&F 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply & fix mild steel pressed handles, oval type, stove enamelled black of size 125mm complete all as specified and directed.

S&F mild steel barrel tower bolt, stove enamelled black with bright bolt of 200 mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section of 200 mm size complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mm square bar made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx100mm long per leaf-01 No, (c) Stopper-01 No per leaf, (d) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No , (e) MS pintal hinges of size 75mmx75mmx12mm per leaf -02 Nos, (f) grills made out as specified and directed and shown on drawings. Note : (i) Glass shall be measured and paid separately under appropriate item of sch'A' (ii) Irrespective of whatever shown of drgs, MS grills shall be of 12 mm dia MS square bar complete all as specified and directed. Note : (i) fabrication shall be as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3 can be seen at HQ CWE JRC during any working days. (ii) Glass painting & grills shall be measured and paid separately.

All as per description of serial item No 14 here-in-before but comprising of gauged shutters Note : (i) Fabrication shall be as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3 can be seen at HQ CWE JRC during any working days. (ii) Wire mesh, painting & grills shall be measured and paid separately.

Material & labour for 30mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 3 mm thick pin headed glass ordinary quality and glazing with oil putty and securing with glazing pins in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply 100 mm long mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply 100 mm long stainless steel butt hinges, ISI marked, medium weight, cold rolled and fixed to angle /PVC frame complete all as specified and directed.

S&F 125 mm size aluminium handles, cast type, anodised and fixed of approved make and ISI marked complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section of 150 mm size complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for 15mm thick cement plaster in cement mortar (1:6) on other than fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified

Material & labour for 15mm thick cement plaster in cement mortar (1:4) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material & labour for preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed.

Material & labour for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

Dismantling of floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Material & labour for rendering 15mm thick cement mortar (1:4) on brick or concrete surfaces to receive wall tiles complete all as specified

Material & labour for glazed ceramic coloured tiles of size not less than 300 x 200 x 6mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in coloured cement to match the existing surface complete all as specified and directed.

Material & labour for coloured ceramic non skid tiles 6 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in skirting/dados etc set and jointed in neat cement slurry and pointed in paste pigment to tile shade as in floors complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 20mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide preimer complete all as specified and directed.

M&L for screed bed 15mm thick cement mortar (1:4) and finished even and rough to receive floor finishes complete all as specified and directed

Material & labour for 25mm thick cement mortar (1:2:4) type B-1 using 20mm graded stone aggregate flooring finished even and smooth without using extra cement complete all as specified and directed.

S&F in repair bib tap 15mm standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed.

Supply & fix in repairs vitreous china squatting pan WC Orissa pattern of size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with CI P or S trap including provision of lime concrete (1 lime, 2 sand & 5 aggregate) 150mm thick bedding including breaking up existing damaged WC seat and connecting flush pipe making good to match with existing surfaces complete all as specified and directed.

Supply and fixing in repair PVC valve less white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including PVC 32mm dia bore flush pipe and connection to WC pan complete all as specified and directed.

Supply & fix in repair PVC connection , 15mm bore size with PTMT nuts of length 450mm and pvc washers at both ends complete all as specified and directed.

S&F in repair 300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete fixing mild steel spring all as specified and directed.

Supply & fix in repairs 15mm bore stop valve/angle valve PTMT, screwed down with high pressure concealed type of iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix rotational moulded polythene water storage tank double layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position complete including dismantling of existing tank of any description, capacity complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F GI tubeing 'medium grade' galvanised, with all fitting and fixed size 15 mm bore complete laid in trenches, walls and ceiling etc complete all as specified and directed.

All as per Ser item 45 here-in-before but for 20 mm bore pipe complete all as specified and directed

Material & labour for 75mm thick Cement mortar (1:2:4) type B-2 (using 40 mm graded stone aggregate), as in flooring finished even & smooth without using extra cement complete all as specified & directed.

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with steel wire staples complete all as specified and directed.

Use & waste of form work to soffits of suspended slabs such as roof slab and similar work not exceeding 200mm thick with rough finished surface or concrete all as specified and directed

Use & waste of form work to sides and soffits of beams, chajjas and the like for rough finished surfaces complete all as specified and directed

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for RCC M-25 (Design mix) for slab supported on wall, beams,columns and in shelves, etc complete all as specified and directed.

Dismantling of 100/75 mm dia cast iron, jointed in cement mortar and taking out from floors or walls complete all as specified and directed.

M&L for 75 mm bore sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to walls complete all as specified and directed.

Supply & fix 75mm bore bends, diminishing pieces or tapers complete all as specified and directed.

Extra over 75 mm dia cast iron pipes and fittings if lead joint is provided in lieu of cement joints complete all as specified and directed.

S&F in repair 75 mm cast iron floor trap, outlet fixed with grating including jointing to waste pipe fixed in cement concret 1:2:4 type B-1 complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

Supply & fix in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of size 140mm complete all as specified and directed.

Material & labour for preparation of old decorated surface of walls and applying one coat of cement base paint complete all as specified and directed.

Supply and fix 3 mm thick pin headed glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply & fix in repairs stop valve 20mm bore, cast copper alloy, chromium plated high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Material & labour for hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

S&F vitreous china wash basin, white, flat back, size 550x400 mm with pillar tap cast copper alloy with capstan heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts waste fitting of PTMP, PVC connection including new brackets including cutting and pinning in ends of brackets complete all as specified and directed.

Material & labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry and pigments as in floors complete all as specified and directed.

M&L cement concrete type E-2 1:5:10 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

Dismantling of AC sheets roof covering all as specified and directed

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantlinig of wall and ceiling boards any thickness including cover fillets all as specified and directed

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to

S&F 4 mm thick non asbestos fibre cement building boards (designer) fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit 25 mm bore (ISI marked) and accessories (concealed in wall & surface in ceiling complete including cutting ,chases & making good disturbed surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point controlled by one way switch and/or through regulator complete all as specified and directed. complete all as specified.

All as per srl item No. 78 above but for 3 pin socket outlet 6 Amps on on independent board complete all as specified.

All as per srl item No. 78 above but for 3 pin socket outlet 6 Amps on same board complete all as specified.

M&L for point wiring with 2.5 sqmm multistranded copper conductor PVC insulated FRLS unsheathed cable 1100 volt grade in PVC conduit medium gradeof size 25mm (ISI marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3mm thick plastic laminated sheet top cover with 2.5 sqmm single core, multi stranded copper conductor, PVC insulated unsheathed cable for common earth and connecting for earth dolly for 6 pin, 16 socket outlet on independent board complete all as specified and directed. complete all as specified.

S&F switch piano flush type 5 amp single pole one way complete all as specified and directed.

S&F switch piano flush type 15 amp single pole one way complete all as specified and directed.

Supply and fix socket out let 2 in 1, 3pin 5 Amp flush type multi purpose complete all as specified.

Supply and fix socket out let 2 in 1, 3pin 15 Amp flush type multi purpose complete all as specified.

Supply and fix ceiling rose surface type bakelite 65 x 17.5 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Taking down old unserviceable fluorescent tube light fitting 36/40 watt fluoroscent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface complete all as specified and directed.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED batten housing made of extruded aluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. complete all as specified and directed. Make:C & S Cat Part No LTDCD1220W LED/WD or equivalent makes as in Appx 'B'

Taking down old unserviceable bulkhead fitting and supply & fix bulkhead fitting decorative ceiling/wall mounted bulk head with engineering plastic housing and top frame with opal PMMA diffuser suitable for 1 x 06 watt LED bulb including 1 No 06 watt LED of Cat part No. CG80IB6WLED of C&S electric or equivalent as in Appx 'B' complete all as specified and directed.

S&F recess mounted LED square downlighter 15 watt die cast aluminium housing high efficiency diffuser provides soft glare free light etc complete with all accessaries internally prewired and including connecting up with twin core twisted flexible copper conductor cble with suitable size. Cat Part No LSDN-15-CDL Make: CG or equivalent in Bajaj/Philips/Surya

Taking down u/s MCBs and Supply & fixing MCB, 6 to 32 amp, SP, 240 volt including necessary connection complete all as specified and directed.

Taking down u/s MCBs and Supply & fixing MCB, 32 to 63 amp, SPN, 240 volt including necessary connection complete all as specified and directed.

Taking down u/s MCBs and Supply & fixing MCB, 40 to 63 amp, TP, 240 volt including necessary connection complete all as specified and directed.

Taking down u/s MCBs and Supply & fixing MCB, 40 to 63 amp, TPN, 240 volt including necessary connection complete all as specified and directed.

Taking down old unserviceable sub main wiring and Material & labour for submain wiring with 04 single core PVC insulated unsheathed multi stranded copper conductor cable (FRLS) 6.00 sqmm 1100 volts grade including and 6.00 sqmm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of size 25mm (ISI marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc all as specified and directed by Engr-in-charge. Note : Four run of 6 Sqmm cable and one run of 6 Sqmm cable as earth continuity conductor and PVC conduit 25mm will be measured & paid as one unit.

Taking down old unserviceable sub main wiring and Material & labour for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable (FRLS) 4.0 sqmm 1100 volts grade including and 4.00 sqmm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of size 25mm (ISI marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc all as specified and directed by Engr-in-charge. Note : Two run of 4 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor and PVC conduit 25mm will be measured & paid as one unit.

S&F Distribution board 4 way TPN double door as incomer with MCCB 100 Amp TPN breaking capacity 16 KA, MCCB is pre fitted at factory premises complete all as specified and directed

S&F Distribution board 4 way TPN double door as incomer with MCCB 63 Amp TPN breaking capacity 16 KA, MCCB is pre fitted at factory premises complete all as specified and directed.

Taking down old U/S DB and Supply & fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate. (II) PCC chamber shall be (1:3:6) type C1 using 20mm graded stone aggregate and 40mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. (iii) Item includes the cost of 7.5 m GI pipe for protection of earth wire/strip any variation in length shall be adjusted through deviation order. (iv) Item includes the cost of 7.5 m earth lead wire/strip any variation in length shall be adjusted through deviation order.

G M BUILDERS 36

COSMO BUILDERS

KAMAL AGGARWAL