REPAIR REPLACEMENT MAINTENANCE TO INTERNAL ELECTRIFICATION WITH ALLIED WORKS, REPLACEMENT OF CONVENTIONAL LIGHT FITTINGS TO LED FITTINGS AND REPAIRS OF CEILING FANS EXHAUST FAN PEDESTAL FAN WALL FAN ETC AT RCI TECHNICAL AREA ZONE-I UNDER GE I RND RCI

Amount

Taking down point wiring of any description from surface/concealed conduit for light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials from site and making good disturbed surfaces of walls, floors, etc., to match with the existing complete all as directed.

M&L, Point wiring complete with FRLSH PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) and accessories fixed to surface of walls/roof/ceiling with PVC sleeve/dash fastener and cadmium plated screws etc., with and including modular metal flush boxes made out of 1.6mm mild steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLSH PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- Note: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.

One light/fan point controlled by one, one way switch, 5/6 Amps

One socket outlet, 3 pin, 5/6Amps, controlled by one way switch on same board with other switches.

One socket outlet, 3 pin, 5/6Amps, on independent board controlled by one way switch.

All as per item No. 2 above but with 2.5Sqmm FRLSH cable for 5pin 15Amps socket outlet on independent board and 2.5Sqmm FRLSH cable for the earth continuity conductor.

S&F Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F Modular Socket, 6Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F Modular step type fan regulator, 120W, 2 module complete all as specified and directed.

S&F Ceiling rose, surface type Bakelite, three terminal 65x50mm, ISI marked complete all as specified and directed.

M&L for sub main wiring with 2runs of single core 4Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 4sqmm copper conductor as earth continuity conductor and connecting to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed.

M&L for sub main wiring with 2runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 20mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly including taking down old unserviceable submain wiring complete all as specified and directed. Note for item No 11 & 12: Two runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

M&L for Sub main wiring with 4runs of single core 6Sqmm 1100 Volts grade, FRLSH PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including PVC casing and capping, medium grade, of minimum width 25mm (ISI marked) along with accessories fixed on walls/roofs/floors etc, including provision of FRLSH PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly including taking down old unserviceable sub main wiring complete all as specified and directed. Note : Four runs of cable, one run of earth continuity conductor and one run of PVC casing and capping shall be measured as unit length.

S&F in repairs, 15watt LED recess mounted luminaire suitable for Armstrong/POP ceiling with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 and high efficiency long life LEDs as light source, powdered by electronic driver and with all accessories complete all as specified and directed. Make: Havells Cat No PLUTO1X1PLR15WLED857S or techno commercially equivalent of Phillips / Wipro.

S&F in repairs, recess mounting 42W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs and with all accessories including driver pre-wired complete all as specified and directed. Make: Havells Cat No: VENUSNEO2X2R18-42WLED857MODUGR<19 or Philips CAT No RC 380 B LED 43 S-6500 G5 L60 W60 PSU OD or Techno commercially equivalent in Wipro.

S&F in repairs, recess mounting 28W LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs and with all accessories including driver pre-wired complete all as specified and directed. Make: Havells Cat No: VENUSNEOHE4X1PLR28WLED 857S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, flat panel 2x2, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver and with all accessories complete all as specified and directed. Make: Havells Cat No PLANOSURFACE2X2PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, 15watt LED surface mounting downlighter suitable for wall/ceiling surfaces with ABS housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver and with all accessories complete all as specified and directed. Make: Havells Cat No GLOWDLS15WLED857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, flat panel 4x1, 42watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver and with all accessories complete all as specified and directed. Make: Havells Cat No PLANOSURFACE4X1PLS42WLED 857S or techno commercially equivalent of Phillips / Wipro

S&F in repairs, recess mounted 10W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs and with all accessories complete all as specified and directed. Make: Havells Cat No INTEGRANEODLR10WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, recess mounted 15W LED down lighter suitable for Armstrong/Grid ceiling with pressure die-cast aluminium heat sink, PC diffuser in white powder coated finish with integrated driver and high performance LEDs complete with all accessories complete all as specified. Make: Havells Cat No INTEGRANEODLR15WLED840S or Techno commercially equivalent in Philips/Wipro

S&F in repairs, LED Highbay less than 120W powder coated light fitting suitable for suspension mounting at any height in Hangers/Workshop with aluminum alloy pressure die cast housing and control gear box with high efficiency long life LEDs with lumen output not less than 15000lm, CCT 5700 K or above with specified beam angle to ensure better uniformity of light distribution, IP65 Protection and impact resistance of IK07, built in electronic driver, lower THD, open circuit protection, over surge and voltage protection complete with all accessories complete all as specified. Make: Havells CAT No. SAUCERGENXPROHBP120WLED 757P60DBOLTG or Philips CAT No BY 515P LED 1505 5700 NB PSU GR or Techno commercially equivalent in Wipro.

Note: 1. Rate quoted shall be deemed to include the cost of necessary hydraulic ladder or aerial access platform mounted on vehicle for fixing the light fittings. 2. Contractor shall produce LM-79 and LM-80 certificate for the luminaires supplied by OEM and genuinity of purchase from manufacturer before claiming any payment. BIS R No. is mandatory for LED light fixtures/drivers. LED fixture and driver should be of the same manufacturer.

S&F in repairs, 3pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand / L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4 pole 63Amp MCCB, 16KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand/ L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 3pole 125Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: L&T CAT No.DNI-250C or equivalent in Legrand/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 125Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: L&T CAT No.DNI-250C or equivalent in Legrand/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 3pole 200Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: L&T CAT No.DNI-250C or equivalent in Legrand/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 200Amp MCCB, 25KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: L&T CAT No.DNI-250C or equivalent in Legrand/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 400Amp MCCB, 36KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: L&T CAT No.DN3B-400D or equivalent in Legrand/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, 4pole 630Amp MCCB, 50KA rupturing capacity at 415volt with adjustable thermal and magnetic settings, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: L&T CAT No.DN3-630N or equivalent in Legrand/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, MCB, SPN, 63Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand / L&T/ Siemens/Schneider/C&S as approved by GE

S&F in repairs, MCB, SP, 6 to 40Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand / Siemens / L&T / Schneider/C&S as approved by GE

S&F in repairs, Isolator TP, 40Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand /Siemens / L&T / Schneider/C&S as approved by GE

S&F in repairs, Isolator TP, 63Amps, 415volts, ISI marked complete all as specified and directed. Make: Legrand /Siemens / L&T / Schneider/C&S as approved by GE

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 4Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 8Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 12Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed. Make for item No 35 to 36 Legrand/L&T/ Siemens/ Schneider/C&S as approved by GE

S&F in repairs, CRCA sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 8 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete all as specified and directed. Make : Legrand/L&T/ Siemens/ Schneider/C&S as approved by GE

S&F in repairs, CRCA sheet metal enclosure with metal clad plug and socket single phase with three pin and earth plugh & socket sitable for surface/flush mounting 230 V, 20 Apms capacity controlled by and including one 20 Amps MCB , 10 KA capacity complete all specified and as directed. Make : Legrand/L&T/ Siemens/ Schneider/C&S as approved by GE

Taking down the existing unserviceable ceiling fan of any make/ model and sweep for overhauling / servicing after disconnecting carefully cleaning and checking for unserviceable components, and replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor flexible chord and shaft / painting etc., including assembling after lubricating the movable components and installing in its original position connecting, testing and commissioning all as specified and directed.

All as per Item No. 39 above but Pedestal Fan of Sweep 230/300/450/600mm.

All as per item No.39 above but single phase Exhaust fans and Air Circulator from any height installed in workshops. Note:- Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor/ Rewinding / cord flexiable / shaft shall be measured and paid separately under relevent items of Sch ‘A’.

Supply only rubber bush/bolt /clamps and connected items suitable for ceiling fan of any make/model/ type sweep of 1200/1400 mm complete all as specified and directed

Supply only shaft suitable for ceiling fan / Exhaust fan/ pedestal fan/ wall mounted fan/ Air circulator of any make/model and sweep with necessary machining work complete all as specified and directed.

Supply only flexible copper conductor, twin core 0.50 Sqmm 1.5m long PVC insulated unsheathed 415 volts grade for ceiling fans complete all as specified and directed. Make : Finolex/Fine Cab

M & L for rewinding of any make/model of fans including removal of existing burnt windings carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper conductor of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings nd applying air dry insulating varnish and drying the windings thoroughly complete all as specified and directed for the following :-

Ceiling fan of 1200 / 1400 mm sweep.

Exhaust fan of 230/300mm sweep, Pedestal/ wall mounted fan of 400 mm sweep

Exhaust fan of 450 mm sweep / Air circulator of 450/600 mm sweep.

Supply only ball bearing suitable for ceiling fan / wall mounting fan/Pedestal fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge. Make : SKF/NBC/TATA/Usha

All as per Item No.46 above but for Exhaust fan / air cirulator of any make / model / sweep.

Supply only gunmetal bush suitable for ceiling fan / wall mounting fan/Pedestal fans of any make/model/ sweep and Exhaust fan of any sweep with necessary machining work as per requirement complete all as specified and directed.

S&F fan down rod 1.5/2.0/2.5 complete all as specified and directed.

Supply only capacitor 2.5 mfd suitable for ceiling fan and testing complete all as specified and directed. Make- Havells/Tibcon/Capco/Dada

Supply only capacitor 3.5/4 mfd suitable for ceiling fan and testing complete all as directed. Make- Havells/Tibcon/Capco/Dada

Rahul Enterprises (BID ID -3156194)

S.S.ENGINEERING CORPORATION (BID ID -3158931)

EXELLENT POWER CORPORATION (BID ID -3165032)