Repairs to wooden chairs and tables at Abohar and Fazilka Military Station

Amount

TABLE 900 X 600mm with and without Drawer

Removing the exising unserviceable top of table 3' X2' with / without drawer and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-223/284 /224/283 /42 /55)

Removing unserviceable legs of table 3' X 2' with and without drawer and S&F of new legs as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-223/284 /224/283 /42 /55)

Removing unserviceable long rails of table 3' X 2' with and without drawer and S&F of new long rails as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-223/284 /224/283 /42 /55)

Removing unserviceable side rails of table 3' X 2" with/without drawer S&F of new rail as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-223/284 /224/283 /42 /55)

Removing unserviceable drawer of table 3' X 2' with drawer and S &F new drawer as existing alongwith chromium plated knobs all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-223/284 /224/283 /42 /55).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-223/284 /224/283 /42 /55).

TABLE CENTRE

Removing the existing unserviceable top of table centre & S&F of new top of size 900x450mm made out of prelaminated (one side) particle board 18/19mm thick including 4mm thick TW beading around all as specified and directed by Engineer - in - Charge. (Drg No. FD-29/235/274).

Removing old unserviceable legs of table centre S&F of new legs as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-29/235/274).

Removing unserviceable long rail of table centre S&F of new rails as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-29/235/274).

Removing old unserviceable short rail of table centre and S&F new short rail made out of 1st class hard wood as shown in the drg all as specified and directed by Engineer - in - Charge. (Drg No. FD-29/235/274).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-29/235/274).

TABLE BED SIDE

Removing the existing unserviceable top of table bed side S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-210/248/ 276 ).

Removing unserviceable side planks and replacing the same with one side teak faced prelaminated particle board all as specified and directed by Engineer - in - Charge. (Drg No. FD-210/248/ 276 ).

Removing the unserviceable shelf/bottom , S&F shelf/bottom plank made out of prelaminated partcile board all as specified and directed by Engineer - in - Charge. (Drg No. FD-210/248/ 276 ).

Removing the unserviceable back plywood , S&F new 6mm thick BWR grade plywood commercial as existing all as specified and directed by Engineer - in - Charge. (Drg No. FD-210/248/ 276 ).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces including inside shelf all as specified and directed by Engineer - in - Charge. (Drg No. FD-210/248/ 276 ).

CHAIR DINING

Removing the unserviceable front legs , S&F new front leg as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-279, FD-16).

All as per item No 4.01 but Rear legs

All as per item No 4.01 but Front rail

All as per item No 4.01 but Rear rail

All as per item No 4.01 but Side rail

All as per item No 4.01 but Back Wooden

All as per item No 4.01 but Stiffner

Removing existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as specified and shown on drg and as directed by Engr-in-charge. (For chair 0.40x0.39 = 0.156 Sqm) (Drg No. FD-279, FD-16).

Removing old unserviceable PVC seat from existing chair dining and S&F new PVC seat single piece 3mm thick weight not less than 0.39 Kgs with holes having 4 x 10mm thick ribs moulded all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD 279/FD MAP II/05).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD 279/FD MAP II/05).

CHAIR WRITING

Removing the unserviceable front legs, S&F new front leg as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-280/FD-20)

All as per item No 5.01 but Rear legs

All as per item No 5.01 but Arms

All as per item No 5.01 but Front rail

All as per item No 5.01 but Rear rail

All as per item No 5.01 but Side Rail

All as per item No 5.01 but Stiffner

All as per item No 5.01 but Teak wood back

Removing existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat and 3.5 mm wide cane for borders of chair all as specified and shown on drg and as directed by Engr-in-charge. (Drg No. FD-280/FD-20)

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-280/FD-20)

CHAIR EASY

Removing the unserviceable front legs , S&F new front leg as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-229/FD-17)

All as per item No 6.01 but Arms

All as per item No 6.01 but Front rail

All as per item No 6.01 but Rear rail

All as per item No 6.01 but Side rail

All as per item No 6.01 but Top/Bottom rail Back frame

All as per item No 6.01 but Side rail back frame

Removing existing cane cleaning of cane holes and recanning with 2 mm wide new plastic cane for seat 3.5 mm wide cane for borders of chair all as specified and shown on drg and as directed by Engr-in-charge. (For chair Seat 0.51x0.45=0.2295 Sqm) (Back 0.43x0.34=0.1462 Sqm) Total 0.3757 Sqm (Drg No. FD-229/FD-17)

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-229/FD-17).

PEG TABLE

Removing the existing unserviceable top of peg table , S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-FD-384, FD-25, FD-236, FD-277).

Removing the unserviceable leg , S&F new leg as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-FD-384, FD-25, FD-236, FD-277).

All as per item No 7.02 but long rail

All as per item No 7.02 but short rail

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-FD-384, FD-25, FD-236, FD-277).

TEAPOY

Removing the existing unserviceable top of Teapoy S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-382, FD-278, FD-232).

Removing the unserviceable leg , S&F new leg as existing of Ist class hard wood all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-382, FD-278, FD-232).

All as per item No 8.02 but stiffner

All as per item No 8.02 but long rails

All as per item No 8.02 but short rails

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-382, FD-278, FD-232).

SIDE BOARD

Removing unserviceable back , S&F new back of side board with 6mm thick BWR grade commercial ply wood as existing and all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

Removing the existing unserviceable shutter, S&F new shutter as existing made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The shutter shall be fixed with 4mm thick TW edging all round as per drg and fixed with aluminium anodised knob with ball spring catch all as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

Removing the unserviceable leg , S&F new leg as existing of Ist class hard wood all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

Removing unserviceable drawers, S&F new drawers made out of 12mm Veneer Decorative plywood and fixed with aluminium anodised knob all as per existing and shown on drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

Removing unserviceable shelves from side board and S&F new shelves as per existing shape & size made out of 18mm thick particle board one side teak faced all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

Removing unserviceable side ply of side board and S&F new side ply of 19 mm thick one side teak veneer as per existing shape & size all as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces including inside of shutter all as specified and directed by Engineer - in - Charge. (Drg No. FD-371/241).

TABLE WRITING

Removing the exising unserviceable top of table writing and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Removing unserviceable shutter and S&F new shutter made out of 18mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side.Shutter shall be fixed with 4mm thick TW edging all round and one aluminium anodised knob all as shown on drg and all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Removing unserviceable legs and S&F TW legs as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Removing unserviceable bottom stiffner S&F new stiffner of bottom as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Removing unserviceable drawer and S&F new drawer of table writing made with 6mm commercial plywood to bottom , 3 sides with 12mm thick wooden planks and 19mm thick prelaminated particle board to front portion. The drawer shall be fixed with aluminium anodised knob. Rest all as per existing and as specified in drg and all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Removing unserviceable back ply from table writing and S&F new back ply of 6mm thick commercial plywood BWR grade as per existing shape & size all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Removing unserviceable bottom of box and S&F new botom of table writing with 18mm prelaminated particle board exterior grade as per existing shape & size and as specified in drg and all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces including inside of shutter and all as specified and directed by Engineer - in - Charge. (Drg No. FD-257/249).

TABLE DRESSING LADIES

Removing unserviceable back ply of mirror and S&F new 6mm commercial plywood to back of mirror as existing and as per drg and all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable wooden member and S&F new TW member for holding mirror alongwith mirror frame alround as existing and all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable top of box and S&F new top made out of 19mm thick Prelaminated particle board one side teak shade to the top of table dressing ladies all as per drg with 4mm thick TW edging and all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable alluminium channel and S&F new 12x22mm Aluminium channel for sliding glass all as per drg and all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable leg and S&F new leg as existing of Ist class hard wood and all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable mirror and S&F new looking mirror of 5mm thick as existing and all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable knob and S&F new aluminium anodised knob to drawer all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Removing unserviceable drawer and S&F new drawer all as per existing size made out of Veneer Decorative plywood of 12mm thick commercial BWR grade all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-378, FD-251).

TABLE DRESSING GENTS WITH MIRROR

Removing unserviceable back ply of mirror and S&F new 6mm thick ply wood to back of mirror as per existing shape & size all as specified and directed by Engineer - in - Charge. (Drg No. FD-230/379).

Removing unserviceable wooden member and S&F new TW member for holding of mirror alongwith mirror frame all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-230/379).

Removing unserviceable mirror and S&F new looking mirror of 5mm thick as per existing shape & size all as specified and directed by Engineer - in - Charge. (Drg No. FD-230/379).

Removing unserviceable knobs and S&F new aluminium anodised knob to drawer all as specified and directed by Engineer - in - Charge. (Drg No. FD-230/379).

Removing unserviceable drawer and S&F new drawer all as per existing size made out of Veneer Decorative plywood of 12mm thick commercial BWR grade all as specified and directed by Engineer - in - Charge. (Drg No. FD-230/379).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-230/379).

TABLE DINING 6 PERS

Removing the existing unserviceable top of Table and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-277, FD-30).

Removing the unserviceable legs and S&F new legs as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-277, FD-30).

Removing the existing unserviceable top rail and S&F new rail as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-277, FD-30).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-277, FD-30).

TABLE DINING 8 PERS

Removing the existing unserviceable top of Table and S&F new top made out of 18/19mm thick prelaminated particle board one side decorative teak shade and balancing white shade to the other side. The top shall be fixed with 4mm thick TW edging all round all as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-273/30).

Removing the unserviceable legs and S&F new legs as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-273/30).

Removing the existing unserviceable top rail and S&F new rail as existing of Ist class hard wood all as specified and directed by Engineer - in - Charge. (Drg No. FD-273/30).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-273/30).

BED PLY WOOD TOP

Removing unserviceable plywood and beading of head board and S&F new teak veneered decorative plywood 4mm thick to both sides of the head board including fixing 6mm thick teak wood beading all round and as exising and as specified in drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

Removing unserviceable plywood and beading of foot board and S&F new teak veneered decorative plywood 4mm thick to both sides of the foot board including fixing 6mm thick teak wood beading all round and as exising and as specified in drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

Removing unserviceable long rail & S&F new long rail made out of well seasoned teak wood as per existing shape & size all as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

Removing unserviceable support short rail and S&F new short suport rail made out of TW as existing and as per drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

Removing unserviceable legs and S&F new leg made out of well seasoned teak wood as per existing shape & size and as shown on drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

Removing unserviceable ply wood top and S&F new ply wood 12mm thick commercial BWR grade with appropriate size MS screws 08 Nos as exising and as specified in drg and as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces all as specified and directed by Engineer - in - Charge. (Drg No. FD-246/247).

SOFA SET 4 / 5 SEATER

S&F 32 density 530x560x100mm cool foam cushion covered with cloth tapestry superior quality , colour, pattern and quality as approved by GE/Engr-in-Charge. Make of cushion - SAMRAT/Sleepwell/Kurlon. Each cushion cover shall be provided with one side openable zip. (Drg No. FD-281/373).

S&F cushion cover only of size 530x560x100mm cloth tapestry superior quality , colour, pattern and quality as approved by GE/Engr-in-Charge. Each cushion cover shall be provided with one side openable zip. (Drg No. FD-281/373).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces to sofa set 5 seater all as specified and directed by Engineer - in - Charge. (Drg No. FD-281/373).

Preparing the old polished wooden surface for polishing with suitable sand paper & applying one coat of french polish to obtain a glossy finish on all the exposed surfaces to sofa set 4 seater all as specified and directed by Engineer - in - Charge. (Drg No. FD-281/373).

CHAIR PVC BLOW PLAST

S&F new readymade seat and back cushion covered with maroon colour velvet cloth superior quality as existing on old chair with nut and bolts as directed by Engr-in-Charge.

SUDESH ENTREPRISES