Road improvement work and interlocking tiles on side track and drain repair work by hot mix plant in the lane from HDFC Bank to house no. 155/1 and house no. 133/1 in ward 16 Mangal Pandey Nagar Sector 1.

Dismentling of B/W in cement motar. (sin.no 692)

Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273]

M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. SIN No- 305(A)

Cement Concrete with 2 cm gauge approved graded stone grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. [S.I No. 279(a)]

12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)

S/Laying of 22-4 -53 mm size stone ballest

Consalidation of stone ballast excluding of roller charges and excluding all.

Supply of 80 mm thick ISI marked I shaped mechanicaly compressed interlocking cement concrete paver blocks manufatactered by high prussureand control vibration machine having plan dimension 200 x (160+120 mm )with minimum 5 mm thick topping of O.P. cement mixed with 25 %marble powder . The compresive strenth of concrete paver block shall not be less than 30 Mpa and 4.50 kg per no. including cost of all material labour T& P etc required for proper complition of work new item no-14 Work should be done with colour tiles.

Providing laying spreading and compactiog graded stone aggregate to wet mix macadam including premixing the material with water at OMC in mechanical mix plant,carriage to mixed material by tipper to site, laying in uniform compacted layers of 100 mm thick with paver in sub base/base course on well prepared surface and compactong with vibratory roller to achiver the desired density including all T&P taxes & labour cess etc as directed by engineer in charges etc all. complete.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per SQM on the prepared bituminous surface cleaned with mechanical broom.

Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates from approved quarry of specified grading premixed with bituminous binder (VG-30) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher to the requred grade leval and alignment rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction (Ref. to Mort&h specification no 507) adjustment for bituman shall be done as per job mix formula and e-in-c latter no 2651 Dt 27.07.2012

Providing and laying bituminous concrete with 100-120 TPH batch type H.M.P. producing an average output of 75 tone per hour using crushed aggregates from approved quarry of specified greding premixed with bituminous binder VG- 30 @ 5.40 per cent of mix and filler transporting the hot mix to work site layig with a hydrostatic paver finisher to required grade level and allgnment, rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction (Ref. to mort & h specification No. 509.) adjustment for bitumen shall be done as per lob mix formula and Engineer-in-charge letter no 2651 Date 27.07.2012

providing & laying cateyes reflective pavment marker twin shanks of adequeate length anchored with epoxy/bitu ASA HIPS support a load 13.635 M.T.its reflective lens its body 130x20x105 mm reflective each surface shall not be less than 13 sq.cm.

Providing & laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms /sq.mt. area . Thickness of 2.5 mm inclusive of surface applied glass beads as per I.R.C uniform and free from steaks and holes.

Supply/ fixing of black granite stone sign board with cutting of given maters as per direction of engineer in charge in all complete

Deduction cost of old brick

Deduction cost of old brick bat