REPAIRS/REPLACEMENT OF SECURITY LIGHT, TIMER AND CONNECTED ALLIED SERVICES AT OUTPOCKETS OF DINJAN MIL STN AND REPAIR/MAINT OF INTERNAL ELECTRIFICATION AT E/M INSTALLATIONS UNDER GE DINJAN

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments.

M&L for bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and as directed.

Dismantling of unserviceable broken HT/LT steel tubular/RCC/Strut poles including demolition of foundation as required and making good disturbed surface complete all as specified and as directed. Note : (1) Earth work shall be measured and paid seperately.

M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9 mtr long) including painting (aluminium paint) and writing pole serial number using paint in white colour on black background complete all as specified and as directed. Note : (1) Earth work shall be measured and paid seperately.

Dismantling/taking down old aluminium steel reinforced (ACSR) conductor of any size from HT/LT overhead line including all jumper etc and keeping servicable materials in safe custody for reuse complete all as specified and as directed.

S&F for aluminium conductor steel reinforced (ACSR) conductor of size 1 of 6/1x2.11mm (squirrel) or as required at site including binding, staining in HT/LT overhead line including all jumper connection and binding on insulator with new wire complete all as specified and as directed.

M&L for pin type porcelain vitreous white/brown insulator including one galvanised mild steel spindle two galvanised iron nut 100mm height 65mm dia suitable for 1100 volts grade complete all as specified and as directed.

M&L for shackle type porcelain vitreous white/brown/green including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 100mm height and 115mm dia, size of strap 31mmx5mm and dia of bolt 14mm suitable for 1100 volts complete all as specified and as directed.

Taking down LED/CFL/sodium vapour/metal halide/MV lamp street light/flood light/ any other light fitting of any make and size refixing the same in position after replacement of unserviceable/defective parts like fittings , lamps , LED driver etc as required to make the fittings in smooth serviceable condition and testing complete and as directed. Note : (i) Replacement of unserviceable parts shall be measured and paid seperately as "supply only" (ii) Replacement of worn out cables as per existing size and type of the fitting shall be deemed to be included in the unit quoted rate of this item. (iii) Necessary climbing arrangements like scaffolding for repairing/ removing/ refixing the fittings should be included in the quoted rate.

Supply only LED street light fitting of capacity 100W, with pressure die cast housing , toughned glass and individual LEDs with secondary optics and IP 66 protection and impact resistance of IK07, including nuts and bolts for holding the street light fitting and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. . Make : Cat No. : ENDURAPEARLMAGNUMSL100WLED757PASYTOTGAST of Havells/ BAJAJ/Philips/CG/. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor) (Necessary excavation, PCC work, Bracket, Connecting wire will be measured and paid separately under relavent items)

All as per item No. 13 here-in-above but for 90 Watt. Make : Cat No. : ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO of Philips/Bajaj/Wipro/Crompton/CENTURY. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

All as per item No. 13 here-in-above but for 70/75 Watt. Make : Cat No. : ENDURACITYLINERNEOSL70WLED757PASYBOTG of Philips/Bajaj/Wipro/Crompton/CENTURY. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

All as per item No. 13 here-in-above but for 60 Watt. Make : Cat No. : ENDURAPEARLNEOSL60WLED757PASYTOPC of Philips/Bajaj/Wipro/Crompton/CENTURY. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

All as per item No. 13 here-in-above but for 40/45 Watt. Make : Cat No. : ENDURAPEARLNEOSL40WLED757PASYTOPC of Philips/Bajaj/Wipro/Crompton/CENTURY. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 200W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and as directed. Make : Cat No. : JETAVALOURFL200WLED757PINTNBLTG of Philips/Bajaj/Wipro/Crompton/Century. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, 100W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and directed. Make : Cat No. : JETAIRISFLS100WLED757SYMLTG of Havells/ BAJAJ/Philips/CG/. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, 70W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and directed. Make : Cat No. : JETAPROFL70WLED757LTG of Philips/Bajaj/Wipro/Crompton/CENTURY/Eveready) (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, 50W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded Aluminium/Copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and directed. Make : Cat No. : JETAQUANTOPLUSFLP50WLED757SYMLENS of Philips/Bajaj/Wipro/Crompton/CENTURY/Eveready) (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs integral compact wide beam high performance LED flood light luminaire with IP 66 protection, tampered protective toughened glass cover, thermal shock impact resistance cover, epoxy black powder coated finish, high purity , 30W LED of luminous efficiency greater than >120 Lm/watt with built in control gear including connecting up with 2.5 Sqmm multistranded Aluminium/Copper conductor cables of suitable length with fixed to pole/wall, etc and testing complete all as specified and directed. Make : Cat No. : JETAQUANTOPLUSFLP30WLED757SYMLENS of Philips/Bajaj/Wipro/Crompton/Century. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs modular junction box made of SMC/FRP of size 250x250x155mm with provision of MCB SP, and connector terminal 4 pole indicating RYB Phase Colour and Neutral colour complete fixed to street light pole with suitable size of mild steel/ flat iron clamps, nuts and bolts complete all as specified and as directed. Make : Cat No. GSJB 2525 of Sintex/Hensel.

S&F in repairs, LED post top lantern of 50 Watt made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP65 protection, CCT 5700, surge protecton ˃ 5k, THD ˂ 10%, 100/m/w poly caibonali differ including providing and connection with 1.5Sqmm copper conductor, multistranded copper conductor cable of required length complete all as specified and as directed. Make : Cat No. : RUBYMAXIPT50WLED757PSYMTOPC of Havell's/ HPL/Bajaj. (Warrenty on Driver, LEDs and PCB for 5 Years to be submitted by the contractor)

S&F in repairs decorative gate light 20W made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 Base, including providing and connection with 2.5 Sqmm aluminium conductor, cable of required length and taking down old unserviceable fitting of any make and size complete all as specified and as directed. Make : Cat No. LHDC10115099 of Havells /HPL/Bajaj.

S&F in repairs smart LED bulb B22 base, 12 watt for existing gate light including providing connection with 2.5 Sqmm aluminium conductor, cable of required length and taking down old unserviceable fitting of any make and size complete all as specified and as directed. Make : Cat No. SSK-SMW-12W-5C of Syska/Bajaj/Philips/Wipro.

S&F for 18 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. Make : Havells/Philips/Bajaj/Wipro/Crompton/Century.

S&F for 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07 including all fixing arrangement including taking down old unserviceable complete all as specified and as directed. Make : Havells/Philips/Bajaj/Wipro/Crompton/Century.

S&F for 9 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. Make : Havells/Philips/Bajaj/Wipro/Crompton/Century.

S&F for 10 Watt LED down light surface mounting round type PDC aluminium housing, soft diffused lighting hight 69mm colour temperature 6000K complete all as specified and as directed. Make : Cat. No. INTEGRANEOSURFACEDLS10WLED84OS of Havells/Philips/Bajaj/Wipro/Crompton/Century.

S&F for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F for LED Lamp 9 Watt complete all as specified and as directed. Make : Havells /Philips/Bajaj /Surya.

S&F in repair decorative wall light fitting, City light (CITY- 1 of Havells) made up of polycarbonate, suitable for 1 x 15 Watts with 15 watt LED bulb complete with all accessories including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings complete all as specified and dierected. Make : City - 1, Cat No LHDL02160099 of Havells/Philips/Bajaj/CG/century.

S&F in repairs 18 Watt surface and wall mounting type LED batten with polycarbonate housing & integratedcomplete all as specified and as directed. Make : Havells/Philips/Bajaj/CG/Wipro/Century.

S&F in repairs 9 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated complete all as specified and as directed. Make : Havells/Philips/Bajaj/CG/Wipro/Century.

S&F in repair LED bollard with inbuilt B22 holder made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection, AC 120-300 volts 50 Hz including connected with 3 run of 1.5 Sqmm copper condiuctor, multistranded, copper conductor cable of required length complete all as specified and directed. Note: LED bulb will be measured and paid separately.

S&F in repairs street light bracket arm of length not less than 1.5 m made out of GI tubing, 32 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed.

S&F in repairs street light bracket arm of length not less than 1.5 m made out of GI tubing, 25 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed.

S&F for batten holder with screw in existing post top lantern fitting by removing top post in place of pin type holder to suite B22 base LED bulb complete all as specified and as directed. Make :Bajaj/Havell's/GE.

S&F in repairs 25 mm dia, rigid non metalic, PVC conduits complete with all accessories suitable for wiring to street lights complete all as specified and as directed.

S&F for time switches digital type 415 Volt Three phase of 20 Amp rating with contactor fitted inside steel enclosure complete including connecting items complete all as specified and as directed. Make : Havells/Philips/L&T.

S&F for time switches digital type 250 Volt single phase of 20 Amp rating with contactor fitted inside steel enclosure complete including connecting items complete all as specified and as directed. Make : Havells/Philips./L&T.

M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole coping including necessary form work for fair finish surfaces duly breaking the old damaged and placing a new flush box for termination inside the base complete complete all as specified and as directed. Note : Rate deemed to be included of CRCA sheet made out of sunken box with terminals.

Supply only LED lamp 20 Watt B22 base complete all as specified and as directed.

Supply only PVC insulation tape of pack of 30 rolls multi colour and black of standard size and thickness 2 to 3mm complete all as specified and as directed.

Supply and laying of cable PVC insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10.00Sqmm 2 core including taking down old cable complete all as specified as directed.

S&F in repairs service cable, 1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core stranded conductor of 6 Sqmm nominal cross sectional area complete all as specified and as directed.

S&F in repairs 1100 volts grade PVC insulated and sheathed, multi stranded aluminium conductor cable 2.5 Sqmm weather proof flat twin core cable to connect from junction to light fittings complete all as specified as directed.

S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 20 to 45 watt including taking down old unserviceable driver complete all as specified and as directed.

S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 60 to 100 watt including taking down old unserviceable driver complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, otherwise described over 10cm width or girth and applying two coat of heat resistant aluminium paint including cross arms over a coat of aluminium oxide primer complete all as specified and as directed.

S&F for LED post top 20 W cap clear/frosted glass type, lumen 1900, CCT 5700K, with surge protection >5Kv, protected with ratedvoltage 240 Volts including high voltage and short circuit protection IP 65, with necessary suitable fixing accessories and arrangements complete all as specified and as directed. Make : Century Magik/Havells/Eveready/C&S.

Supply only integrated LED aviation lights comprising of aluminium housing with polycarbonate enclosure complete all as specified and as directed.

S&F in repairs 32 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, pole using suitable clamp/holder bat complete all as specified and as directed.

Taking down the service connections of the light fittings from connector/ceiling roses/overhead bare conductor etc of the street/security lights from height of approx 7mtr from ground by any means on PCC/metal poles with all safety measures to remove the carbon deposits/ disconnected due to wind/wear & tear and connecting/fixing back the connections/fittings complete all as specified and as directed.

Taking down aluminium/copper point wiring (light, fan, socket or power) including unserviceable light fittings, switch board complete, switch sockets, ceiling roses, pendants, regulators, sockets, etc and removing materials from site and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunken type) 3mm thick hylam sheet cover fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed.

All as per item No 57 above but for one 3 pin socket outlet, 5 Amps on Independent board.

All as per item No 57 above but for one 5 Amps, 3/5 pin socket outlet on the same board with other switches.

All as per item No. 57 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 3 pin socket outlet, 5/15 Amps on Independent board complete all as specified and as directed.

S&F for switch piano, 5 Amp single pole, flush type one way 230 volts bearing ISI marked complete all as specified and as directed.

S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts bearing ISI marked complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5/16 Amps, 240 volts, bearing ISI marked flush type complete all as specified and as directed.

S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body bearing ISI marked and including PVC box complete all as specified and as directed.

S&F for stepped type(five steps) electronic fan regulator flush type complete all as specified and as directed. Make : Anchor, Model No. 14502 /Havells / Legrand.

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed

S&F in repair PVC rectangular block for mounting, MCB DB's etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and as directed.

S&F in repair PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and as directed

Taking down unserviceable sub-main wiring up to 10 sqmm with rigid steel conduits/PVC casing-caping including cutting chases for taking out conduits and making good disturbed surfaces complete all as specified and as directed.

M&L for sub main wiring with two run of 6 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 6 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

M&L for sub main wiring with two run of 4 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 4 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

M&L for sub main wiring with two run of 2.5 sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including one run of 2.5 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

M&L for sub main wiring with four run of 10 sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including two run of 10.0 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

M&L for sub main wiring with four run of 6 sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (FRLSH), 1100 Volts grade drawn through PVC casing-caping/conduit of suitable size, fixed to wall/ceiling etc including two run of 6.0 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (FRLSH) as earth wire and duly connected to common earth point complete all as specified and as directed. (Note : (a) PVC Casing-caping/conduit, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets)

S&F in repairs switch piano, flush type, 5 Amps, single pole, one way, bearing ISI marked 240 Volts complete all as specified and as directed.

S&F in repair socket outlet, 3/5 pin , 5 Amps, flush type bearing ISI marked complete all as specified and as directed.

S&F in repairs ceiling rose, 3 Terminal, PVC/polycarbonate, isolated body (with PVC box) bearing ISI marked complete all as specified and as directed.

S&F in repair stepped type(five steps), electronic fan regulator, 220 volts, flush type complete all as specified and as directed. Make : Anchor, Model No. 14502 / Havells/ Legrand.

S&F in repair lamp holder, PVC/Polycarbonate type insulated body with back plate in existing location suitable for batten fittings complete all as specified and as directed.

S&F in repair factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incomming end, SPN, 8 way, 240 Volts suitable for housing MCBs including complete all as specified and as directed.

S&F in repair factory made board distribution (DB) double door in sheet steel enclosure with common bus bar at incomming end, SPN, 4 way, 240 Volts suitable for housing MCBs including complete all as specified and as directed.

S&F in repair MCB, double pole, 415 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. Make : Legrand/Havells/L&T.

S&F in repair MCB, 'C' Series, SP, 240 Volts, 6 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. Make : Cat. No. 408587 to 408595 of Legrand/Havells/L&T.

S&F in repair MCB, 'C' Series, SP, 240 Volts, 40- 63 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. Make : Cat. No. 408596 to 408598 of Legrand/Havells/L&T.

S&F in repair sheet metal enclosure for MCB DB double door single pole & neutral 2 way, 240 V with common bus bar at incoming end complete all as specified and as directed.

S&F in repair PVC casing caping of size 20-25mm complete all as specified and as directed.

S&F in repair PVC casing caping of size 25-32mm complete all as specified and as directed.

S&F in replacement of old wooden display boards with name board high grade PVC board (thickness nort less than 4mm) and letters of size and colour approved by EIC for display in stations/ pumphouses duly fixed to the wall with suitable fixing arrangement etc complete all as specified and as directed.

Supply and laying synthetic insulating mat of size not less than 2m x 1m x 19mm thick complete at the substations and other installations by removing and disposal of the wornout mats complete all as specified and as directed.

S&F in replacement of First Aid Box high grade GI body wall mounted factory made powder coated with approved colour with medical red cross indication with clear fibre/glass display racked compartment to place first aid items etc complete all as specified and as directed. Note : Size not less than 33 x 29 x 8 cms alongwith minimum required first aid items.

S&F in repair three core of single run copper cable PVC insulated, PVC sheathed, flexible stranded, FRLSH copper cable suitable for outdoor use 1.5 Sqmm PVC single core PVC insulated, in existing conduit/casing complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @ 15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers, necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing the base in which pit cover rests made up of MS angle iron (Frame) complete as specified and as directed.

R D Enterprises

M/S AUTOMOTIVE WORLD

FREEZCON

M/s GANDHESWAR PHUKAN

MAZUMDAR ENTERPRISE

M H KHAN